My Iphone is in a loop and blue screen is the ending.
It crashed when I was checking my email and then was stuck in the initial apple homescreen and then into a rotating wheel and then blue screen. Then goes back to the apple reboot homescreen and so on.
I can't access to my iphone at all! I'm out of the country on business and no mobile phone due to this bug! Thank you very much, Apple, always exceeding my expectations!
Device: Iphone 5S 32G unlocked and bought through apple store in December 2013, 2.5 months old!
Any help would be much appreciated!
Thanks!
This is what is happening:
http://www.youtube.com/watch?v=_qBidKe0dCo
Its looping with this sequence.
Similar Messages
-
Can Motion 5 replace a green screen and blue screen in the same shot?
Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.
Fox gives a good example for keying green & blue (or any other color) from the same shot. I'd suggest doing a few things to get better accuracy.
First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness. It also will remove spill based on this color. Looking at Fox's example movie and the shot, I'd approach the same shot this way:
Remove the Blue
1. Apply the keyer and set the strength to zero.
2. Use the Sample Color tool and select the blue (or other color) to be removed.
3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune. Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
Remove Green
It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend having the Color Selection open so you can see the graphs. These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools. Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change more than the tolerance selection. Observing what is happening in these graphs will help you figure out wha to change and speed things up. -
The system booted to a blue screen yesterday. Booted to leopard install disk and ran DiskUtil. Everything was OK. Ran repair permissions, OK too. Found a possible fix from Apple- MAC 101 Lesson 2: Startup Setbacks. Moved the com.apple.loginwindow.plist and the com.apple.windowserver.plist from /Library/Preferences. Rebooted and the login window appeared instead of the blue screen. Type in my password, the system went to a blue screen and back to the login screen. Changed the password from the Install disk. Typed the original password and the login screen "shook". Typed the new password and the system went to a blue screen and back to the login screen. Any ideas, other than reinstall the OS? From the command line,
drwxr-xr-x@ 11 root wheel 374 Nov 6 20:29 /usr
drwxr-xr-x@ 11 501 admin 374 Nov 6 20:29 /Users/me
It seems that the system doesn't know that 501 and "me" are the same person. In UNIX the /etc/passwd file enter would need to be changed to poit "me" to 501. Does anyone know how to correct this?If it happens again...
Son was using the computer and I believe that his time ran out. He called me and when I looked at the computer, there was a blue screen with the mouse. The only thing that I could do is reboot, so I turned off the computer using the power button, turned it back on, and still, nice blue background and the mouse. I could not log in as anyone else.
What I had to do is turn off the computer and pull the plug. When I booted up again, I see that his account has reached it's daily max. Now I have to turn off the parental controls unless I want to continue to play tech support, THE one thing the iMAC was supposed to address. -
Equium M37-337 keeps crashing and blue screen list the fault as - igxprd32
Hi,
The laptop model number is Equium M37-337 PSM77E-00L00MAV
from looking through the web I see this is a graphics issue.
When starting the laptop it will go int Windows and then crash with a blue screen listing the above. This lasts only about half a second and then machine just goes to a black screen and nothing else.
I am able to turn the laptop off by holding down the power button for several seconds. When I try and restart it returns to the black screen state.
If I leave the laptop off for somre time (say 30 minutes) it reverts back to the startup to the Windows and then bluescreen black screen sequence.
I have tried booting to windows safe mode but a similar crash occurs (although sometimes this is just the machine locking up with some thin black lines across the display.
Is the on board graphics 'card' broken? Is this a common problem with this model? Is this economically fixable?
Thanks
ChrisHi,
What I would recommend doing first would be to do a product recovery on the machine. Baring in mind that any data you have on the notebook will be lost by doing this; it is imperitave you back up your data first before going ahead with that.
The reason I am saying you should do that first is if the repair do see this as a software issue, and should you have any extended warranties on the notebook, you would be charged (although this may be the case anyway). Also, baring in mind that if the product recovery does solve the problem then you could save yourself a whole lot of time with waiting for repairs.
As far as I am aware there is no known issues with this machine where the graphics are concerned, and it's not something I have heard of with that model. As far as the repair being economical, I would first have a quote on the laptop. I know that would cost ?£35 but if the repair cost is within your budget and cheaper than a new unit then that'll be better for you.
Unfortunately there is no way of finding out what the cost of the repair will be, as the repairs are done at a specalist repair centre, which is far from here. You'll have to have that sent in first for a quote before you'll know.
I hope that helps,
Regards,
Nukey
Edited by: ADMIN on 27-Apr-2008 07:50 -
i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back, and i tried to press the power button with the home button but it wont work
fadijaber wrote:
i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back,
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
ITunes 9.2 causes fatal error and "blue screen of death"
I installed Itunes 9.2 this morning and whenever I tried accessing this version of Itunes, my system hangs and showed me the infamous “blue screen of death”. I have tried uninstalling and reinstalling Itunes but nothing seems to work.
Anyone encountering this problem and is there any way to solve this? Thanks!I was using v9.1.1.12 and could not synch my iphone with outlook although with other versions there was no problem so was keen to install the new version of iTunes yesterday (9.2.0.61). Installation went fine, iTunes opened up perfectly and read my music library and hey presto synched my phone with outlook. I was well pleased. Closed down itunes and went back to working A couple of hours later as my secretary had updated my calendar I plugged in my iphone and itunes started to open then.... disaster. The blue screen appeared.
I restarted again, and again and again and the same thing happens everytime iTunes was opened (independently or when plugging my iphone in). Tried 4 times.
I did a repair using itunes installer. No change stilled blue screened when opened. I then had the bright idea of uninstalling iTunes totally and reinstalling. No change - itunes begins to open then causes blue screen.
The next step I uninstalled itunes. Did a disk defrag and then thought I would reinstall version 9.1.1.12 and install the newer version over the top. But hey you have guessed it, the older version would not open because the library it was using had been created with a newer version i.e. v9.2.0.61 - nice one iTunes!!
So at the moment I have no iTunes at all so am stuffed. So, iTunes solves one problem but creates another. Do they ever check these things???
Help!! -
While trying to sync my iphone 4 my screen froze with a picture of blue circle with a music note in it, says iTunes under it and a picture of the end of the USB cord at the bottom...it will not let me reboot my phone and will do NOTHING else...anyone else have this happen?? How do I fix this??
Typing in all caps indicates shouting, is considered rude, and is difficult to trad. Many simply do not read such posts. As your title is in all cpas, many may not read it.
Have you tried to reset the iphone?
Restore it? -
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues. -
i own a ipod touch and a ipad2g but i lost my ipod touch and downloaded the find iphone app on my ipad and when i opened the app my ipod touch wasnt even listed on it as one of my products but i use the same apple id for all of my products??!! Please Help
Ive never used that but I think there is a find ipod app. But im not sure. The ipod might have had to have it on?
-
i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!
Looks like you restored your backup file to her phone. If you didn't back up your wife's phone first, then the data is gone, sorry.
-
I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung. I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S. How do I switch the 4 to her number once I make the switch to a new 4S?
Just call yur provider and they will set it up with you.
This is what I do, when I get a new iphone and give mine to my wife. -
my iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help
If you didn't set up Find My iPhone in the iCloud settings, then you can't. Notify the police and change the password to your Apple ID and any other online services you used from that iPhone, just as a precaution.
Regards. -
i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks
See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Dmp file and blue screen error Windows 7
Hi,
Just wondering if someone can tell me how to read the dmp file created after the blue screen appears ?
I have just recently upgraded my Toshiba P300 from Vista 64 bit to Windows 7 Home Prem 64 bit.
I dont know why Windows 7 keeps crashing and so far I have no idea of how to open the .dmp
file (I have zipped the dmp file and attahced below).
http://cid-7a99d6152c55359c.skydrive.live.com/self.aspx/.Public/minidump/022710-26223-01.zip
The message that I been given so far says :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: a
BCP1: FFFFF6FC40052000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002E62322
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\022710-26223-01.dmp
C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xmlI have try step 1 and didnt boot up the window normaly...same thing happened
Window 7 is loading...then boom the screen failed and blue screen appear...
there is the latet crash report
Version=1
EventType=BlueScreen
EventTime=129810543666556864
ReportType=4
Consent=1
ReportIdentifier=9fb6a978-99f3-11e1-9b67-fa9a72be4846
IntegratorReportIdentifier=050912-14508-01
Response.type=4
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
UI[2]=C:\Windows\system32\wer.dll
UI[3]=Windows has recovered from an unexpected shutdown
UI[4]=Windows can check online for a solution to the problem.
UI[5]=&Check for solution
UI[6]=&Check later
UI[7]=Cancel
UI[8]=Windows has recovered from an unexpected shutdown
UI[9]=A problem caused Windows to stop working correctly. Windows will notify you if a solution is available.
UI[10]=Close
Sec[0].Key=BCCode
Sec[0].Value=a
Sec[1].Key=BCP1
Sec[1].Value=0000000000000000
Sec[2].Key=BCP2
Sec[2].Value=0000000000000002
Sec[3].Key=BCP3
Sec[3].Value=0000000000000001
Sec[4].Key=BCP4
Sec[4].Value=FFFFF8000308BB7E
Sec[5].Key=OS Version
Sec[5].Value=6_1_7601
Sec[6].Key=Service Pack
Sec[6].Value=1_0
Sec[7].Key=Product
Sec[7].Value=256_1
File[0].CabName=050912-14508-01.dmp
File[0].Path=050912-14508-01.dmp
File[0].Flags=589826
File[0].Type=2
File[0].Original.Path=C:\Windows\Minidump\050912-14508-01.dmp
File[1].CabName=sysdata.xml
File[1].Path=WER-27253-0.sysdata.xml
File[1].Flags=589826
File[1].Type=5
File[1].Original.Path=C:\Users\Moz\AppData\Local\Temp\WER-27253-0.sysdata.xml
File[2].CabName=Report.cab
File[2].Path=Report.cab
File[2].Flags=196608
File[2].Type=7
File[2].Original.Path=Report.cab
FriendlyEventName=Shut down unexpectedly
ConsentKey=BlueScreen
AppName=Windows
AppPath=C:\Windows\System32\WerFault.exe
ive also have got a AI SUITE II crash...
Version=1
EventType=APPCRASH
EventTime=129809041249476693
ReportType=2
Consent=1
UploadTime=129809041250516752
ReportIdentifier=ddea075d-9895-11e1-9a9f-eb38eba38a41
IntegratorReportIdentifier=ddea075c-9895-11e1-9a9f-eb38eba38a41
WOW64=1
Response.BucketId=2555721005
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=AI Suite II.exe
Sig[1].Name=Application Version
Sig[1].Value=1.0.0.40
Sig[2].Name=Application Timestamp
Sig[2].Value=00000000
Sig[3].Name=Fault Module Name
Sig[3].Value=KERNELBASE.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7601.17651
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4e211319
Sig[6].Name=Exception Code
Sig[6].Value=0eedfade
Sig[7].Name=Exception Offset
Sig[7].Value=0000b9bc
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
UI[3]=AI Suite II has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\Windows\syswow64\WINTRUST.DLL
LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[7]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\ADVAPI32.DLL
LoadedModule[13]=C:\Windows\system32\VERSION.DLL
LoadedModule[14]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\COMCTL32.DLL
LoadedModule[15]=C:\Windows\syswow64\GDI32.dll
LoadedModule[16]=C:\Windows\syswow64\USER32.dll
LoadedModule[17]=C:\Windows\syswow64\LPK.dll
LoadedModule[18]=C:\Windows\syswow64\USP10.dll
LoadedModule[19]=C:\Windows\system32\MSIMG32.DLL
LoadedModule[20]=C:\Windows\syswow64\SHELL32.DLL
LoadedModule[21]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[22]=C:\Windows\syswow64\OLE32.DLL
LoadedModule[23]=C:\Windows\syswow64\OLEAUT32.DLL
LoadedModule[24]=C:\Windows\system32\IMM32.DLL
LoadedModule[25]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[27]=C:\Windows\system32\rsaenh.dll
LoadedModule[28]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[29]=C:\Windows\system32\ncrypt.dll
LoadedModule[30]=C:\Windows\system32\bcrypt.dll
LoadedModule[31]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[32]=C:\Program Files (x86)\ASUS\AI Suite II\AsMultiLang.dll
LoadedModule[33]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[34]=C:\Program Files (x86)\ASUS\AI Suite II\ImageHelper.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.17514_none_72d18a4386696c80\gdiplus.dll
LoadedModule[36]=C:\Windows\system32\USERENV.dll
LoadedModule[37]=C:\Windows\system32\profapi.dll
LoadedModule[38]=C:\Windows\system32\GPAPI.dll
LoadedModule[39]=C:\Windows\system32\cryptnet.dll
LoadedModule[40]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[41]=C:\Windows\system32\SensApi.dll
LoadedModule[42]=C:\Windows\system32\Cabinet.dll
LoadedModule[43]=C:\Windows\system32\DEVRTL.dll
LoadedModule[44]=C:\Windows\system32\WindowsCodecs.dll
LoadedModule[45]=C:\Windows\system32\WINHTTP.dll
LoadedModule[46]=C:\Windows\system32\webio.dll
LoadedModule[47]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[48]=C:\Windows\syswow64\NSI.dll
LoadedModule[49]=C:\Windows\system32\credssp.dll
LoadedModule[50]=C:\Windows\syswow64\mswsock.dll
LoadedModule[51]=\\.\globalroot\systemroot\syswow64\mswsock.dll
LoadedModule[52]=C:\Windows\syswow64\WININET.dll
LoadedModule[53]=C:\Windows\syswow64\Normaliz.dll
LoadedModule[54]=C:\Windows\syswow64\iertutil.dll
LoadedModule[55]=C:\Windows\syswow64\urlmon.dll
LoadedModule[56]=C:\Windows\system32\Secur32.dll
LoadedModule[57]=C:\Windows\System32\wshtcpip.dll
LoadedModule[58]=C:\Windows\System32\wship6.dll
LoadedModule[59]=C:\Windows\system32\IPHLPAPI.DLL
LoadedModule[60]=C:\Windows\system32\WINNSI.DLL
LoadedModule[61]=C:\Windows\system32\dhcpcsvc6.DLL
LoadedModule[62]=C:\Windows\system32\dhcpcsvc.DLL
LoadedModule[63]=C:\Windows\syswow64\CFGMGR32.dll
LoadedModule[64]=C:\Windows\system32\uxtheme.dll
LoadedModule[65]=C:\Windows\system32\DNSAPI.dll
LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
LoadedModule[67]=C:\Windows\system32\rasadhlp.dll
LoadedModule[68]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[69]=C:\Program Files (x86)\ASUS\AI Suite II\AssistFunc.dll
LoadedModule[70]=C:\Windows\system32\PROPSYS.dll
LoadedModule[71]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
LoadedModule[72]=C:\Windows\system32\apphelp.dll
LoadedModule[73]=C:\Windows\syswow64\CLBCatQ.DLL
LoadedModule[74]=C:\Windows\system32\wpdshext.dll
LoadedModule[75]=C:\Windows\system32\WINMM.dll
LoadedModule[76]=C:\Windows\System32\shdocvw.dll
LoadedModule[77]=C:\Windows\SysWOW64\ieframe.dll
LoadedModule[78]=C:\Windows\syswow64\PSAPI.DLL
LoadedModule[79]=C:\Windows\SysWOW64\OLEACC.dll
LoadedModule[80]=C:\Windows\syswow64\SETUPAPI.dll
LoadedModule[81]=C:\Windows\syswow64\DEVOBJ.dll
LoadedModule[82]=C:\Windows\system32\ntmarta.dll
LoadedModule[83]=C:\Program Files (x86)\ASUS\AI Suite II\pngio.dll
LoadedModule[84]=C:\Program Files (x86)\ASUS\AI Suite II\AsAcpi.dll
LoadedModule[85]=C:\Program Files (x86)\ASUS\AI Suite II\asacpiEx.dll
LoadedModule[86]=C:\Windows\system32\RpcRtRemote.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=-1739246291/nBucketTable=1/nResponse=1/n
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=AI Suite II
AppPath=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe -
IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?
If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.
Maybe you are looking for
-
PO approval workflow customization
we want to send email notification to supplier upon approval of PO approval. Is there any default functionality available or we have to customize a PO approval workflow.
-
Rendering a web page in a java application?
is it possible to show a web page based on tags from a java application . For example, in VB i believe there is a component that allows you to render html and view it as seen in a web browser I believe i have seen this done before. stev
-
LINK command in a Report Script 9.3.3
Hello, I would be greatful if someone could help me with one line in a Report Script. I do not know what I am doing. We currently have the line below, which has worked well for years. <LINK (<LEV("Account",0) AND NOT <DESCENDANTS("Statistical_Accou
-
Hi All, I am getting the error 'Comma without preceding colon (after SELECT ?).' with the following select statement. Can someone help me with the error. select single actdate_from actdate_to into ( lv_actdate_from, lv_actda
-
OSX 10.4.6 / Adobe CS2 Install conflict?
I'm trying to install Adobe CS2 Premium. I've installed from this disk set on a number of G5's in our office successfully in the past. However, this was prior to OSX 10.4.6 I've attempted this install on 3 computers in my office. All PowerMac G5's ru