My iphone is not getting started
-iphone shows the image of a cable with an arrow with the symbol of itunes and not getting started
http://support.apple.com/kb/ht1808
Similar Messages
-
I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?
That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to.
-
after restore from backup, iphone is not getting start, only apple logo is there on screen
Hi there.
Try some basic trouble shooting steps first, before looking into some advanced issues that might be causing this. The first thing I would try, is holding down the power button and home button at the same time until the screen turns off on you. See what steps you can take from there, if any.
Kind Regards.
- Mike. -
apple phone 3g is not getting started and i can find only apple logo when connected to system and my system is not recognizing the mobile device. kindly help me in this regard
Put the device in DFU mode (google it) and restore as new.
-
My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy -
My I phone 5 which is only 6 month old is not getting started, what to do
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
Peace, Clyde -
hi guys... iam stuck in a problem what can i do because my iphone is not gettin started after the restoration process and its showing me a itunes symbol and a usb port
can anyone help me
-
HT3960 my iphone not getting start
hi this is anuj garg from india...my ihone5 not getting start and service centre of india dont have right to solve my problem...
plz help me and resolve my problem.
<Personal Information Edited by Host>Ohh,. ya! i simply recover my problems by changing 30 pin dock connector assembly
and tips here,.use that connector carefully from water and dust., never try to connect to some wer u needed,.use the proper way
Thaks for all !! -
my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started
It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
I woke up this morning and found my iPhone 4 is off condition, With the assumption that is needs to be charged, I tried to hook up for charging, I haven't succeed in this attempt, The phone is not getting started, even i charge it, Help me out.
Try a reset:
- hold the home button and sleep/wake button down at the same time for atleast 15 seconds
- if you see the Apple logo appear rlease both buttons
If that fails try charging the iPhone while plugged into the wall adaptor and also while plugged into the computer. Try cahrging both ways for atleast 15-20 minutes. Also while its plugged into the computer check and see if the computer or iTunes will recognise that the iPhone is connected. -
Dev server the dispatcher is not getting start
Dear all ,
We are facing problem in dev server the dispatcher is not getting started. Plese suggest
The log file .
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Oct 05 08:43:39 2009
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 561 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode, 64 bit
M pid 4936
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4936) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 38064 (1464)
M DpShMCreate: sizeof(tm_adm) 3609968 (17960)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 312000 (624)
M DpShMCreate: sizeof(vmc_adm) 0 (512)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D440050, size: 4077792)
M DpShMCreate: allocated sys_adm at 000000000D440050
M DpShMCreate: allocated wp_adm at 000000000D441C30
M DpShMCreate: allocated tm_adm_list at 000000000D44B0E0
M DpShMCreate: allocated tm_adm at 000000000D44B110
M DpShMCreate: allocated wp_ca_adm at 000000000D7BC680
M DpShMCreate: allocated appc_ca_adm at 000000000D7C2440
M DpShMCreate: allocated comm_adm_list at 000000000D7C4380
M DpShMCreate: allocated comm_adm at 000000000D7C43A0
M DpShMCreate: allocated vmc_adm_list at 000000000D810660
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000D810690
M DpShMCreate: allocated wall_adm at 000000000D8106A0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Oct 05 08:43:40 2009
M calling db_connect ...
C Prepending E:\oracle\DEV\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 11395]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C
C Mon Oct 05 08:43:41 2009
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 11395]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#3 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server DEVDEV_00 on host DEVDEV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Oct 05 08:43:41 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4936) [dpnttool.c 357]
Regards,
KumarHi Sunny,
Thanks , i have try to stop the database and then startup the database. Then it is giving me error
SQL> startup
ORACLE instance started.
Total System Global Area 1109237592 bytes
Fixed Size 737112 bytes
Variable Size 587202560 bytes
Database Buffers 520093696 bytes
Redo Buffers 1204224 bytes
Database mounted.
ORA-01113: file 3 needs media recovery
ORA-01110: data file 3: 'I:\ORACLE\DEV\SAPDATA3\DEV_1\DEV.DATA1'
Please suggest what next command to recovery database in oracle 9i.
Thanks,
Kumar -
How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.
You can't, you will need to get a new remote.
-
Report Instance not getting started in Oracle Fusion Middleware 11g Report
Hi
Report Instance not getting started in Oracle Fusion Middleware 11g Report Instance Error
Rep-50125 Java.lang.nullpointerexception
I just installed Oracle Forms,Reports 11g 11.1.1.3.0 in my machine
Even I started opmnctl(Oracle Process Management Control). Its too running fine.
Please Guide me the settings need to do to start the report instance.
Regards
Murali N SHello,
Copy rwlpr.exe from Oracle_Home\bin to Oracle_Instance\config\reports\bin
Regards -
Hi,
my system s (sap bw NW04 platform) SAP web application server is not getting started.It is of 6.40 version. it always stays in yellow colour even after 1 day!
i had found that in process list, dispatcher is stopped!
i am pasting the log at developer trace ! please go through it and tell me what could be the remedy!
trc file: "dev_disp", trc level: 1, release: "640"
Mon Nov 06 18:26:06 2006
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 1252
***LOG Q00=> DpSapEnvInit, DPStart (00 1252) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Nov 06 18:26:12 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 069F0040, size: 3192688)
DpShMCreate: allocated sys_adm at 069F0040
DpShMCreate: allocated wp_adm at 069F1B58
DpShMCreate: allocated tm_adm_list at 069F4478
DpShMCreate: allocated tm_adm at 069F44A0
DpShMCreate: allocated wp_ca_adm at 06C9B0E8
DpShMCreate: allocated appc_ca_adm at 06CA0EA8
DpShMCreate: allocated comm_adm_list at 06CA2DE8
DpShMCreate: allocated comm_adm at 06CA2E00
DpShMCreate: allocated vmc_adm_list at 06CE9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CE9AF8
DpShMCreate: allocated wall_adm at 06CE9B00
MBUF state OFF
Mon Nov 06 18:26:13 2006
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 594 blocks reserved for free list.
ES initialized.
Mon Nov 06 18:26:18 2006
J2EE server info
start = TRUE
state = STARTED
pid = 2768
argv[0] = C:\usr\sap\J2E\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\J2E\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\J2E\SYS\profile\J2E_DVEBMGS00_RKOTTUR
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1164
argv[5] = -DLISTEN_PORT=1165
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=J2E
argv[8] = -DSAPMYNAME=RKOTTUR_J2E_00
argv[9] = -DSAPPROFILE=C:\usr\sap\J2E\SYS\profile\J2E_DVEBMGS00_RKOTTUR
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Nov 06 18:26:19 2006
***LOG Q0K=> DpMsAttach, mscon ( RKOTTUR) [dpxxdisp.c 9736]
Mon Nov 06 18:26:21 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Nov 06 18:26:23 2006
DpJ2eeLogin: j2ee state = CONNECTED
Mon Nov 06 18:26:43 2006
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2768)
ERROR => DpProcKill: kill failed [dpntdisp.c 433]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Nov 06 18:27:00 2006
ERROR => W0 (pid 2776) died [dpxxdisp.c 12187]
ERROR => W1 (pid 2784) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 2808) died [dpxxdisp.c 12187]
ERROR => W5 (pid 2816) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2824) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 2832) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2776 (SIGUSR2)
ERROR => DpWpKill(2776, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2784 (SIGUSR2)
ERROR => DpWpKill(2784, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2792 (SIGUSR2)
ERROR => DpWpKill(2792, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2800 (SIGUSR2)
ERROR => DpWpKill(2800, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-2808 (SIGUSR2)
ERROR => DpWpKill(2808, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2816 (SIGUSR2)
ERROR => DpWpKill(2816, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2824 (SIGUSR2)
ERROR => DpWpKill(2824, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2832 (SIGUSR2)
ERROR => DpWpKill(2832, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 06 18:27:10 2006
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Nov 06 12:57:10 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2776 Ended no 1 0 0
1 DIA 2784 Ended no 1 0 0
2 UPD 2792 Ended no 1 0 0
3 ENQ 2800 Ended no 1 0 0
4 BTC 2808 Ended no 1 0 0
5 BTC 2816 Ended no 1 0 0
6 SPO 2824 Ended no 1 0 0
7 UP2 2832 Ended no 1 0 0
Dispatcher Queue Statistics Mon Nov 06 12:57:10 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Nov 06 12:57:10 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Nov 06 12:57:10 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 06 18:27:15 2006
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2740) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:2740 HANDLE:420)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 06 18:27:16 2006
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2740 HANDLE:420)
[DpProcDied] Process died (PID:2764 HANDLE:412)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process died (PID:2768 HANDLE:388)
NiIMyHostName: hostname = 'RKOTTUR'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 316
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 1252) [dpxxdisp.c 8495]
Good Bye .....
Thank you,
RaviHello Ravi,
Do you mean that the web dispatcher is not running or the J2EE dispatcher process. To me it looks more like that the J2EE dispatcher is stopped so you should look for errors in dev_dispatcher and std_dispatcher.out files.
Best Regards
Vyara -
Jstart.exe process in sap mmc is not getting started
Hi,
The jstart.exe process of sap mmc (management console/server) is not getting started.
The status for this process is "starting the processes". Need help!
The developer trace is as follows :
trc file: "dev_jstart.7668", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7668
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:03:13 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F Mon Oct 08 10:03:13 2012
F ********************************************************************************
F Java environment properties (C:\usr\sap\SV1\J02\work\jstart.jvm)
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 7652] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
F
F [Thr 7652] Mon Oct 08 10:03:14 2012
F [Thr 7652] *** LOG => connected to Enqueue Server.
F [Thr 7652] *** LOG => connected to Message Server.
F [Thr 7652] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 1.
F
F Mon Oct 08 10:03:15 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_deployment.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_deployment.out
F stderr : C:\usr\sap\SV1\J02\work\std_deployment.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Deploy_offline started with pid 7968
F ********************************************************************************
F [Thr 7652] *** LOG => Process deployment started (pid 7968).
F
F [Thr 7652] Mon Oct 08 10:03:19 2012
F [Thr 7652] *** LOG => Process deployment stopping (pid 7968).
F
F [Thr 6972] Mon Oct 08 10:03:19 2012
F [Thr 6972] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process deployment stopped (pid 7968).
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 1 completed.
F [Thr 7652] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 2.
F
F Mon Oct 08 10:03:20 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_bootstrap.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F stderr : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Instance_bootstrap started with pid 7952
F ********************************************************************************
F [Thr 7652] *** LOG => Process bootstrap started (pid 7952).
F
F [Thr 7652] Mon Oct 08 10:03:47 2012
F [Thr 7652] *** LOG => Process bootstrap running (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).
F
F [Thr 7652] Mon Oct 08 10:04:10 2012
F [Thr 7652] *** LOG => Process bootstrap stopping (pid 7952).
F
F [Thr 4436] Mon Oct 08 10:04:10 2012
F [Thr 4436] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process bootstrap stopped (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 2 completed.
F [Thr 7652] *** LOG => Starting run level 3.
F ********************************************************************************
F Java process [debugproxy] properties:
F section name : debugproxy
F config file : C:\usr\sap\SV1\J02\exe\dproxy.properties
F node name : Debug_Proxy
F home directory : C:\usr\sap\SV1\J02/j2ee/rdbg.proxy
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F ICM process [icm] properties:
F section name : icm
F config file : C:\usr\sap\SV1\J02\exe\icm.properties
F node name : ICM
F home directory : C:\usr\sap\SV1\J02\work
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F ********************************************************************************
F ********************************************************************************
F Java process [server0] properties:
F section name : ID24836450
F config file : C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F node name : server0
F home directory : .
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : true
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 0.
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\icman.EXE
F arg[ 1] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 2] = -nodeId=1
F arg[ 3] = -f
F arg[ 4] = C:\usr\sap\SV1\J02\work\\dev_icm
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_icm.out
F stderr : C:\usr\sap\SV1\J02\work\std_icm.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process ICM started with pid 7336
F ********************************************************************************
F [Thr 7652] *** LOG => Process icm started (pid 7336).
F
F [Thr 7652] Mon Oct 08 10:04:12 2012
F [Thr 7652] *** LOG => Process icm running (pid 7336).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 1.
F
F Mon Oct 08 10:04:16 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=2
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -DSAPINFO=SV1_02_server0
F arg[ 4] = -hostvm
F arg[ 5] = -nodeName=ID24836450
F arg[ 6] = -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F arg[ 7] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 8] = -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
F arg[ 9] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_server0.out
F stderr : C:\usr\sap\SV1\J02\work\std_server0.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process server0 started with pid 7616
F ********************************************************************************
F [Thr 7652] *** LOG => Process server0 started (pid 7616).Hi Ravi,
Thanks for your quick response.
Where do I find the default trace for this?
The server0 process status is "Waiting to start". The developer trace for server0 is as follows :
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7616
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:04:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 7280] MtxInit: 10002 0 2
I [Thr 7280] MPI: dynamic quotas disabled.
I [Thr 7280] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 7280] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 7280] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 7280] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7616
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 7364] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 7280] Mon Oct 08 12:28:13 2012
F [Thr 7280] *** LOG => Command STOP 0 {}.
F [Thr 7280] *** LOG => Result for STOP 0 {}: 0 ok, 00000000.
F
F [Thr 7280] Mon Oct 08 12:28:33 2012
F [Thr 7280] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:28:33 2012
J
J ================================================================================
F [Thr 7280] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 684] Mon Oct 08 12:28:33 2012
M [Thr 684] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 5508
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:28:34 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 500] MtxInit: 10002 0 2
I [Thr 500] MPI: dynamic quotas disabled.
I [Thr 500] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 500] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 500] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 500] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=5508
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4136] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 500] Mon Oct 08 12:29:02 2012
F [Thr 500] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:29:02 2012
J
J ================================================================================
F [Thr 500] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 5068] Mon Oct 08 12:29:02 2012
M [Thr 5068] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7704
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:29:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 4980] MtxInit: 10002 0 2
I [Thr 4980] MPI: dynamic quotas disabled.
I [Thr 4980] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 4980] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 4980] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 4980] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7704
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4736] *** LOG => SfCJavaVm: abort hook is called.
Maybe you are looking for
-
Can't seem to save non-English as text from PDF using Reader
I have several PDF documents that were originally generated by OpenOffice from a UTF8-encoded text file. The text is in different languages, e.g. Korean, Arabic, Russian, English. When I open these documents and then "save as text", the resulting tex
-
Eliminating space above character in ai file for exporting to png
Hi, The image above is for a website which has a colored background. The image will be exported as a PNG file so that the background is transparent. I am unable to eliminate the space above 40th. It seems the bounding box around the character can not
-
Hallo, I have a question, if attachements can be added to catalog item(CCM 2.0), for example in PDF form. I need to give purchasers more specific info about the purchasing item. attachements sounds like a good idea but I am not sure if it is possible
-
Jsf (java server faces) and servlets
Hi, Could anyone tell me if it is possible to integrate jsf with servlets rather than jsp. All the examples i see are only using jsp. Thanks.
-
Lightroom 6 difference in color in Library vs Develop module
Hello, i have recently installed LR6 and converted existing LR5 catalog. I have an issue that in Library module, all pictures looks yellow (like wrong color balance) and in Develop module they look correct. When i export a picture into JPG file it al