My iphone is stuck on the settings screen but the home button and lock and power buttons wont work. I can navigate through my settings but can't get out of them or turn off my phone.

My iphone is stuck on the settings screen and the home and lock buttons wont work. I can navigate through the settings but canot go home or turn orr or reset my phone. Please help):

I had the same situation with my iPod touch 5th gen. You can manually reboot it thru pressing sleep/wake button and holding it up to 10 secs - no data will be lost.. This didn't work in mine, but to some it did..
If it won't work, you could do what I did which is I reset all settings in the Reset part. It won't lose any data, just the settings (if you have just less settings did to the device, which I had). So just configure or tweak things again in the settings when it reset again.
Hope this somehow helps!

Similar Messages

  • Help please - I can't update my ipad software as always get network connections issues - have turned off security!!

    help please - I can't update my ipad software as always get network connections issues - have turned off security!!

    I would try updating through a computer. Just make sure that your computer has the latest itunes

  • I'm trying to update my iphone 4s, it's stuck on the wifi screen, I can't restart or turn off my phone because the top button doesn't work

    I'm trying to update my iphone 4s, it's stuck on the wifi screen, I can't restart or turn off my phone because the top button doesn't work

    Press and hold the "Top button" and the Home button together for 15 seconds. This will force iPhone to reboot.

  • I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

    I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

    I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

  • IOS 8.0.2 installation.  Stops after agree to conditions.  Then stuck in General Settings and have to turn off my phone.

    IOS 8.0.2 installation.  Stops after agree to conditions.  Then stuck in Settings General and have to turn off my phone to get out.
    Help.

    Hello bobwa002,
    It may help to reset your iPhone.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If you're still unable to proceed, the next step would be to restore the device.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • HT4623 I was downloading the new IOS and message could not find Iphone - Now my mhone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

    I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

    So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
    Reboot both the computer and the phone and try again.

  • My I phone it is acting weird when I go to the lock screen it will take a picture and I was not touching my phone it will keep asking me if I want to turn off my phon.

    My i phone is acting wired, when I go to the lock screen it will take a picture but I was not touching my phone and it will ask if I want to turn off my phone. o don't know what's wronge with my phone. I'm scared that someone miget of hack my phone?!

    It's not hacked, it's likely experiencing one or more hardware issues, and you need to take it in for service.

  • After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

    Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad
    (a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
    23. Restore from this backup
    24. Continue
    25. Restoring iPad from backup
    26. The settings of your iPad have been restore; keep iPad connected to computer
    27. Syncing iPad (Step 1 to 5)
    28. Preparing apps to sync
    29. Copying 1 of 9
    30. Sync apps, movies and music to iPad
    31. Finishing syncing
    32. Eject iPad

  • I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

    I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

        I'm sorry to learn that your phone is having problems starting up, marinema08. I'm sorry if this is incorrect, but are you using the original HTC Droid Incredible or a later Droid Incredible model? Please try placing your phone in Safe Mode to see if you are able to move past the Droid eye. http://vz.to/1kdQWVI If you are able to enable Safe Mode, please try deleting any recent applications you have added.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • Hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on.

    hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same.   what should i do? Thank you for your help.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • My iphone wont open, i even recovered it but to no avail, all it does is go to the white screen with the apple logo then turn off again

    Hey everyone,
    This morning i took my phone out of the charger and everything was normal however, once i got in the car i looked at my phone and realized it was turned off. I tried turning it on again as well but all it does is going to the start up screen (The white screen with the apple logo) and then it turns off again as well. I also put it on the charger but it does the same thing but repeatedly. So it just goes to the white screen and off again. At last i resorted to recovering my phone even if it meant losing all my data. Slow internet connection meant it took all night but in the morning i recovered and everything and got to the last step ( It told me its finished but i should leave my phone connected to itunes and it will pop up there) but all that popped up was an error screen. It still broken but now sometimes when i try to turn it on the same white screen with the logo comes on with a bar under it. this bar fills up a little then the screen goes black again. Is there any other way i can try to fix this?
    P.S. There are no apple stores in my area so i took it to one of the phone stores here and even they said they couldnt do anything about it

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I need an application that will turn off my iPhone on the home screen just by a one click since my power button has sank and is no longer working--anyone have ideas?? I don't like having to use assistive touch and hit three buttons to lock my screen

    I need an application that will turn off my iPhone on the home screen just by a one click since my power button has sank and is no longer working--anyone have ideas?? I don't like having to use assistive touch and hit three buttons to lock my screen

    No such app exisits or can exist.  Apple doesn't allow 3rd party apps to access core functions of the phone.  Time to get your phone replaced or repaired if assistive touch doesn't needs your needs.

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • How do you turn off the passcode from iphone 3gs?? I do not want to get prompted every time I turn on my phone!!!!

    How do you turn off the passcode feature from iphone 3GS?? I do not want to get prompted every time I turn on my phone.

    Settings > General > Passcode Lock
    You're going to really regret this if you ever lose your iPhone.

  • I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    Hold the home and power button down until your phone restarts. If that doesn't work, backup and restore using iTunes.

Maybe you are looking for

  • Watching a rented movie on iPad that was rented on Apple TV

    I rented a movie on Apple TV. Because my Internet is to slow it returned it without watching the movie. I now can't find it in purchase history or video app on iPad or iTunes. What should I do?

  • Generate Distribution Model ERP = EWM

    HI I am performing Generate Distribution Model ERP => EWM for new WH. Getting below error message. Method BUS2015.SAVEREPLICA exists in model view WMS Message no. BDDISTMODEL051 Please Help to resolve as early Rgds Dinesh.P

  • Trouble with Servletrunner Utility.

    I downloaded the latest version of Java, Java 2 SDK 1.4.0_03. I have the J2SE latest version. I have a servlet. I am able to compile it successfully. I am not able to use the ServletRunner utility. Its not present in j2sdk1.4.0_03\bin. I have set the

  • Help with installing a program

    I hope someone can help me with this problem. I have a late 08 model Macbook Pro with Snow Leopard 10.6.7 installed. I just bought a new CAD program, actually from 05, but still factory sealed, and I cannot install it. I then learned from the seller

  • Bramha

    hi   this is bramha.   can any body explain or send me 1.capitalization of asset under contruction(with configaration) 2.how to upload the assets&values{with configaration) 3.integration fi-sd(with configaration) 4.in app how to get the print