My iphone is switched off as low batery and still viberates. how should i handle that problem?my iphone is switched off as low batery and still viberates. how should i handle that problem?

my Iphoe is switched off and still viberates. how should i handle that problem?

Try to set it up as new device and don't use the backup afterwards:
How to back up your data and set up as a new device

Similar Messages

  • My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

    my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

    Hello s0ha1b
    If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

    Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

    Hello Ritugor,
    I would be concerned too if my iPhone was not powering on.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you.

    I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you. (iPhone 4s)

    Well, you're gonna have to recover the password for that Apple ID:
    http://support.apple.com/kb/ht5787

  • If I change my Apple password as a security precaution because my phone has been lost and switched off, will Find My iPhone still function? That is, will it be able to connect to iCloud, as the password on the phone is still the old one.

    My phone is lost – not stolen, and may still be returned. Not long after I lost it, it was switched off, or died (it was at about 6%), so I can't find it using Find My iPhone. I realized I should change all my important passwords, as the passcode can be compromised by various methods. One password I changed was for my Apple account.
    Now I'm realizing that I shouldn't have done that. What if the phone comes back online – but my AppleID password has changed; will the phone still be able to connect to Apple with the old credentials so my message is sent?
    When I realized this I tried to go back to my old password – but Apple won't let me use one I used in the last year. Any way around this?

    when you change your Apple iD it's pretty much changing the visual email, i guess that doesn't really answer your question, yes you keep your purchases, it just changes the log-in email and email where newsletters , etc. go to.

  • I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off

    I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!

    Hello there, xkatiex255.
    The following Knowledge Base article should provide the steps for you to resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iPhone 5 was stolen and ever since has been showing offline in the 'find my iPhone app' this has been showing since the theft does this mean that they have failed to get into the phone and it has been switched off

    My sons iPhone 5 was stolen out of his blazer pocket while in a games lesson, this was last period and on return to get changed find that someone from his class had stolen his phone from his zipped pocket. Straight away I went onto the find my iPhone on my phone and it has been showing offline since the phone was stolen. The phone had a password set on it and I have notified the police, school and also our carrier. The phone has been offline now for 32 hours, would this mean they have been unable to access the phone and switched it off? Is it possible for the phone to be jail broken while this password has been set. I am most angry that this has happened and the changing rooms are always locked while the lessons take place, so this is someone within my sons class that has stolen the phone. Being a Friday And last lesson the phone is long gone now but I'm hoping with the security measures we have put in place with the pass code etc.... That they won't be able to unlock the phone to use it. The phone was only 2 days old as my son had only just upgraded :(

    All you may infer is the device hasn't been turned on where it can connect to Wi-Fi.
    The phone may be jailbroken if there is no lock passcode to prevent access. However, the phone can be completely erased and restored as new. In this case you will have no ability to locate it or prevent it from being jailbroken.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • HT2375 Using logic 9: play back of all project files now has problems:  Track volumes are way off - if panning is set to center then you cant hear that track? Even if pan is adjusted tracks are low and or distorted I have looked at core/built in audio

    Been having project play back problems for about a month.  Sometimes when I open a project the volume of certain tracks is low and or distorted.  Oddly if a midi track is panned to the center (0) its volume is too low and if I pan right or left the track becomes louder.  Sometimes this doesn't help and if it is an audio track things become distorted. 
    Although things have been working good for about a year now I think it has something to do with the fact that I have to take the laptop to work and use headphones/built in audio for play back and then take it home and use different audio interface but I can't be sure.  The settings in preferences/audio/devises seem to be correct.
    I have not added any plug-ins recently.  I have not downloaded any new programs recently other than a NI tutorial video (shouldn't have any affect) but I am trying to use a new midi controller but again that shouldn't have any affect on play back of existing track?
    Any suggestions?

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • My iphone 4 is stalling a lot. I've had it for a year now, I have the most current OS, it's not too full of apps, or anything like that. Many times throughout the day, I cannot switch from app to app, unless I do a complete power-off. Any ideas?

    I've had it for a year now.
    I have the most current OS. I snyc it to my itunes 2-3 times a week. It is only about 25% full. It stalls (I don't know if I would call it freezing) between trying to switch from app to app. I either have to let it sit there for a few minutes, or turn it all the way off and turn it back on.
    And yes, I know to press the home button twice to get the bottom part activated. That's not working. I'm not sure if this is a common thing, or what with iphone 4's.
    Anyone got any ideas?

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • I just bought an iphone 4s in surat india.the phone switches off itself atleast 2 times in a day.at times the problem is that when it goes to sleep a person trying that number gets a dialer ring.Hence he seems that i have not picked up his call

    i just bought an iphone 4s a month back
    the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
    when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
    missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
    Hence the caller feels that i am not answering his call nor even calling after i see his missed call
    this is a very grave problem i am facing
    please help me out.
    chetan sanghvi

    i just bought an iphone 4s a month back
    the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
    when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
    missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
    Hence the caller feels that i am not answering his call nor even calling after i see his missed call
    this is a very grave problem i am facing
    please help me out.
    chetan sanghvi

  • It tried to update my phone I followed everything it told me to do. My phone then switched off and indicated that I needed to connect to iTunes I did that it said restore and update pressed that and now it says iPhone in recovery can not restore

    Hi I tried to update my iPhone 5 to ios7 I followed everything it told me to do it started to verify switched its self off came up with a symbol that indicated to plug into iTunes I did that it then said restore so I pressed to restore and update a message then came up on iTunes that my iPhone is in recovery and couldn't restore I need help I don't no what to do 

    Just some possible solutions, try and see:
    - Make sure you have the latest version of iTunes.
    - Reboot your laptop.
    - Clear hosts (windows/system32/drivers/etc/hosts)
    - Remove the iOS 7 ipsw and let iTunes download a new one (press WINDOWS KEY + R and type %appdata%, then navigate to Apple Computer/iTunes/Software Updates and remove the ipsw).
    - Don't forget to close iTunes before doing these actions.
    - Try a different USB port.
    - Completely remove iTunes (also from registry and stuff) and re-install.
    - Try on a different computer.

  • HT201407 Hello All, I bought an iPhone of eBay. It seemed fine until this morning when it switched itself off and now it won't come on unless it's plugged in. And even then it is asking that it needs to be activated, but it can't connect to iTunes. Any su

    Hello All, I bought an Iphone of eBay. It seemed fine until this morning when it switched itself off and now it won't come on unless it's plugged in. And even then it is asking that it needs to be activated, but it can't connect to iTunes

    Try Recovery Mode... http://support.apple.com/kb/HT1808

  • I like to watch tvcatchup or sky go or I player on my iPad while falling asleep, the problem is that the iPad then stays on all night. I would like to find an app that allows me to set a timer for the iPad to switch itself off automatically.

    I like to watch tvcatchup or sky go or I player on my iPad while falling asleep, the problem is that the iPad then stays on all night. I would like to find an app that allows me to set a timer for the iPad to switch itself off automatically, like the sleeper function on a TV.
    Does such an app exist? Can anyone help me? Thanks

    You can try the Sleep Timer.
    https://itunes.apple.com/sg/app/music-sleep-timer/id320583424?mt=8

  • Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

  • As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.  If someone is calling me during that time it says mobile is either switched off or outsid

    As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
    If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
    Please help

    You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

Maybe you are looking for

  • Broken component on MSI KT3 Ultra-ARU mainboard.

    Hi Everyone, A friend of mine has an MSI mainboard which has a broken component due to his screwdriver slipping off the CPU clamp while installing a new CPU.   The mainboard is an MSI KT3 Ultra-ARU (MS-6380E) ATX Revision 1.0 The broken component is

  • Is there a way to use SharePoint 2010 Datasheet View in SharePoint 2013?

    Quick edit mode doesn't meet users' requirement.  They want the header freezing and column width adjustable like what they did in SharePoint 2010. I understand the Datasheet view is achieved by Access ActiveX control.  Can this be used in SharePoint

  • Query works in SQL Developer but not in APEX

    The query below runs fine in SQL Developer. I have tried entering it both as a Report Region based on SQL Query and in a Dynamic PL/SQL Region. I get different error messages in each. In the Dynamic PL/SQL Region I get the error that an INTO clause i

  • Safari Freezes in Yosemite on File/Save As and File/Export As pdf

    Since I installed Yosemite a few days ago I can no longer save a webpage to a file or export to a pdf.  All I get is the spinning beach ball on top of a finder window and need force quit safari. The same problem occurs in Safe Mode.  The problem does

  • Is it compulsory to use %@ page language="java" % ....? in JSP

    Hi, Iam testing my JSP application in that i removed the following Page directives <%@ page language="java" %> <%@ page import="java.io.*" %> instead i used the java.io.File in my code directly,which i know is another way of using the java.io.* packa