My iphone is unlocked, but everytime i put in a sim, the network name comes up with no signal
I bought an unlocked iphone 4 off my friend and tried a few micro sims from different networks and all the networks names come up, but, they all have no bars for signal. Its very frustrating.
Please Help
same problem here!
I have read and spent days for googling it, and there are a lot of people with this problem.
This is more likely to happen if your device is Factory Unlocked.
And it is a pity that i HAVEN'T FOUND ANY SOLUTIONS for this
Haven't met or read anyone with this solved.
mine is originally UK vodafone. it has been factory unlocked and i have gone abroad, restored, and no signal bars,but carrier name appears. But with another foreign SIM card, itHAS GOT signal!! Only with the one i need, is not working.
I hope with a firmware update coming, this will be fixed.
I could link dozens of unanswered questions with the same s**t.
I also noticed, that this problem occured recently ... around November 2011. when iS 5.0 or 5.0.1 came out.
Similar Messages
-
I have an iPhone 5 unlocked but cannot get a payg nano sim for Vodafone uk. Any suggestions ?
If Vodafone does not provide a nano-SIM card, there are no suggestions. Not only is the nano-SIM card smaller, it is also thinner, so cutting a micro-SIM card down to size wouldn't be enough to fit.
-
I have an ipod touch 4g and itunes 10.5 but everytime i try updating my itouch to ios5 it comes up with error 3194
please help thank youWhat was the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Using iPhone 5 unlock but iOS 7 cant support giffgaff sim
Hi there, i'm bought my iphone 5 from apple few months ago and since then i'm using O2 sim, however yesterday i tried on giffgaff sim card and my phone need activation and error message showed that sim is not valid as carrier is not support. Anyone can help?
matthewfromrivers wrote:
Good customer service entails that they contact the apple id linked to the device and confirm if it was sold or stolen and help the new owner..
Sorry, but I disagree. It is not the OEM's responsibility to check nor confirm any such thing. it is up to the seller and the buyer, in a private party personal transaction, to ensure that both are satisfied with the terms and conditions of the sale and the item.
You buy a used personal item as is from someone, and it is just that, as is. The responsibility is solely on the two parties making the exchange to ensure that both have gotten what they wanted out of the deal.
No company is going to get involved in any such private party sales or exchanges of items - in the USA at least, it would be a legal minefield for them, if nothing else. Private/personal property sales are just that, private and personal. -
When i turn my ipod on it comes up the apple sign with the black background and then asks me to put in my passcode but when I put it in the apple sign comes up again like its restarting but keeps knocking on and off again please help quickly!!
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
IPhone 5 unlocked but says no service,, tmobile nano sim
I got my iPhone unlocked off ebay and gave the guy my imei number. So after 12-24 hours I call apple and check if my iPhone five is unlocked they said yes. Now I got a tmobile nano sim and put it in my iPhone 5, then I restored it and iTunes said congratulation your iPhone has been unlocked. But for some reason on the top it's saying no service. I asked the tmobile guy at the store to double check if it was activated he said it was, he told me to call customer service I call them and they said there's nothing wrong with the sim its perfectly active. I tried restoring and setting it up again but still the same problem. I even asked AT&T and they said it is unlocked, and said tmobile are the ones who have to help me out and there's nothing they can do.I can't think of any solutions right now, so what's the problem??
So, you mean that My Iphone is fine, it's Tmobile network in The USA that doesn't work with Tmobile. There are 1000's of peolple using tmobile with an Iphone and they don't have problems.. at least that what they say...(customers and Tmobile representatives) In the last 2 days, my iphone is picking up reception worse than ever.. I might change locations for a few blocks, It will pick up signal and then It will fade away in amatter of seconds.. and so on and on.. So, you mean I'll have to wait until Tmobile full y supports Iphone in order to Use it with Tmobile? Thanks for your help in advance.
-
I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work?
In that case the procedure assuming it is a PAYG phone is to get an o2 PAYG sim, put £20 on it and then make a few calls making sure you leave £15 on the sim to pay for the unlock. Then there is an online unlock request form on the o2 site just fill this in. It takes between 1-14 days and you get a message from o2 telling you how to complete the official unlock through iTunes.
I got my o2 unlock in nov 09 so this is not just opinion. -
I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.
Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.
-
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
I restored my iphone 5 on iTunes to unlock it and I got the congratulations you iPhone is unlocked but I still get the no service sign
Is there an active sim in the iPhone? Are you in an area where the
active sim has coverage? -
my boyfriend got me an iphone 4s off ebay and my tmoblie sim will not work in it but if i put an orange sim n it works :(
Sounds like it is locked to Orange.
-
I can't join a network, because everytime I type in the password, "join" turns grey. There's a lock sign next to the network name, but I'm not sure how to unlock it. Can you help me??
The way you "unlock" it is by typing in the correct password. The lock indicates a private network that requires a password. Are you sure you have the correct password? Is this your own home network?
Why don't you reboot your iPad and try to log in again. Hold down on the sleep button until the Apple logo appears on the screen, let go of the button and the iPad will shut off. Turn back on by pressing the sleep button again until the Apple logo appears and let go of the button. See if the iPad will accept your password.
If that doesn't work, you could try tapping the blue arrow next to the network name and then tap Forget This Network. Restart your iPad as described above. Then go back to settings, tap WiFi, select the network and enter the password again and see if it works. -
I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!
If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.
-
I brought a second Hand iPhone 3GS for my daughter on the O2 network. But when I put an O2 sim in to the phone it doesn't connect / keeps searching for network. Can any one help me Connect??
Try: Settings>General>Reset>Reset Network Settings.
-
I am trying to install Snow Leopard, but everytime I put the disc in, it will spin and then eject itself.
http://manuals.info.apple.com/MANUALS/1000/MA1172/en_US/Snow_Leopard_Installatio n_Instructions.pdf
This should give some insight.
Maybe you are looking for
-
How set-up time capsule as external hard drive
How set-up a tme capsule as esternal hard drive
-
2009 Core 2 Duo iMac Display not turning on, but everything else is.
The iMac turns on, but NOTHING is on the screen. The machine boots fine, and can even connect to an external display. Help?
-
No accounting document generated despite value in Billing document
An accounting document is not required for this billing document Message no. VF076 Diagnosis The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been create
-
Office Word reports error on Quit Word - Leopard
*Not sure if this is right area for this Q* Recently upgraded to Leopard on 2 computers. I installed Office 2008 on both. On one computer whenever I quit Word I get the "Microsoft encountered a problem and needs to close* and asks if I want to report
-
VC: Strategies for Triggering Events
Hello All, Other than buttons, how can events be triggered in VC? I am trying to dynamically load a layer once a user clicks on a chart / table without using a button. Is this possible? What is the official answer from SAP? are there any work arounds