My iphone isn't working at all although i replaced the battery
Hello, I have iphone 3gs that doesn't respond for anything, includung electricity and my p.c. I had replaced the battery in a new one and the phone was working for a while, but now it doesn't work again and if my p.c recognizes the phone, the restore can't be accomplished. How can i fix it?
+ Add a Comment
The iPhone is not user servicable. That includes replacing the battery.
Since it's been replaced, it's no longer eligible for an out of warranty replacement from Apple.
Find a competent repair shop or just buy a new phone.
Similar Messages
-
So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?
Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.
-
Mi iphone5 doesnt work at all, i cannot recharge the battery
Does anybody know what to do about it ?
Send it to someone you know and trust in the US - ask them to bring to store and return to you once its repaired.
That's what I would do. -
My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!
If you haven't tried it yet, I'd eliminate memory issues first. Close all of the apps with the double tap on the home button method
http://support.apple.com/kb/HT5137
then restart the device.
http://support.apple.com/kb/HT1430
My experience has been that this fixes a lot of issues. -
My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.
Sounds like a 'stuck' Shift key. You could try to take the key off and put it back on yourself (should be some info on that from ifixit) or just take it to your local Apple Store and have them fix it.
Clinton -
Hi - I keep getting a message on my iphone to back up my iCloud. And - the password that I'm entering isn't working. I know it's the correct password.
Hi mhalstengard,
If you are having issues with your iCloud or Apple ID password, you may find the following article helpful:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Regards,
- Brenden -
The sound on my iPhone isn't working I don't understand why it was working fine an hour ago I haven't dropped it or anything simply just out it on silent... The music I was trying to listen to didn't want to make a sound when I turned it in , I put a pair of headphones in and and it worked as soon as I took it off it completely stopped the music was playing still I could see it in the top column that the play button was on ... Then I made a call an the same thing happened I turned it on speaker and then I could hear them... The sound is completely off even tho i looked at the seettings and put the volume on high noting is sounding on its own not even when i tap the buttons... I took it off the silent before I tried this stuff I don't understand please help !!!
make sure that your head phones are not attached to the phone then use the volume buttons on the side, if when using them you see a pic of headphones on the screen, then you have some lint in the headphone jack, use some compressed air and blow it out.
If you dont see that then try to reset the phone, hold down the home and power buttons for 20 seconds or untill you see the silver apple.
If you are still having a problem restore the phone and set up as new to see if that clears it up.
http://support.apple.com/kb/ht1414 -
I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????
The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India -
After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!
after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.
Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
Sorry you lost your stuff. Hope then next update goes better for you!
Best of luck,
GB -
So I woke up in the morning today, detached my phone which was connected to a Bose Sound Dock II using an original Apple 30-Pin to Lightning connecter. I checked my notifications, replied to some messages on Whatsapp, GTalk, Snapchat and then unplugged the 30-Pin to Lightning connector as got out of bed. I walked a few steps and tried bring up the lockscreen to check the time by pressing the home button (because my Sleep/Power button is broken) and nothing happened. I can't remember how much battery it had actually but I'm sure it had enough to stay on for like half a day. I'm sure its not overheated too. I tried plugging it to charge (because that how I turn my phone on since the Sleep/Power button isn't working) but it didn't show the Apple logo or low battery icon or anything. It didn't even vibrate when I plugged it in with silent mode on. And no sound when I plugged it with silent mode turned off. However I tried calling my phone to check whether its turned on and the telephone operator didn't say that "the phone is switched off or not in a service area" but there was no activity on the phone at all. I need a response for this ASAP. Please!
Thank you.There are no magic words that will overcome broken hardware. Make an appointment at the genius bar and get it fixed.
-
How can i unlock an iphone to be worked on all networks ??
How can i unlock an iphone to be worked on all networks (in egypt)??
If the carrier tells you that they do not unlock iPhones, then there is nothing you can do other than sell the iPhone to someone who can use it with that carrier and purchase an iPhone that is officially unlocked.
Regards. -
TS3276 How can i unlock an iphone to be worked on all networks ??
How can i unlock an iphone to be worked on all networks ??
this is the 10.7 forum (OS X for macs). Post your question in the iPhone forum.
-
zzz
What do you mean by Find my iPhone "isn't working?" As long as you enabled it, even if it's offline, you can go to http://icloud.com/find and remote lock or erase it. The actions will take effect when/if the phone comes online. That is the best you can do.
-
NAC ADSSO with NAC Module isn't working for all modules
Hello,
We have a NAC OOB-L2-VG Deployment at the Central Site with VLAN Mapping and ADSSO which works just fine.
As part of the project we have implemented NAC Modules on ISR routers for the branch offices; same topology but as the documentation states no VLAN mapping was configured. The problem is that for some users in one branch office the ADSSO isn't working and in another branch office the ADSSO isn't working at all, all the users are getting authenticated with a local user we defined on the servers.
The configuration in both modules is exactly the same; they are using the same user to access the AD (the one used on the ktpass) the data links to the central site are both 1 Mbps and everything is pretty much the same thing.
I have checked the logs on the CAS-Module and it states that Windows SSO is running:
Nov 27, 2009 10:08:23 AM com.perfigo.wlan.jmx.admin.GSSRetrier$RetrierTask run
INFO: GSSR - Windows SSO is running
The interesting thing is that when the user goes thru the NAC process I see these logs:
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.SWissServer run
FINE: Sent Response to /172.19.5.11!
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSServer$GSSThread run
INFO: accepted ADSSO socket ...Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSServer$GSSThread run
INFO: accepting ADSSO socket ...
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: processing socket ...Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: TIMEOUT_SET FOR ADSSO SOCKET ... Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:13 AM com.perfigo.wlan.jmx.admin.GSSHandler run
INFO: reading peer's token_length Socket[addr=/172.19.5.11,port=1431,localport=8910]
Nov 27, 2009 8:55:28 AM com.perfigo.wlan.jmx.admin.GSSHandler run
SEVERE: IO Error: Socket[addr=/172.19.5.11,port=1431,localport=8910]:Read timed out
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissHandler processPacket
FINE: SWissServer: get request from : 1043@/172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissHandler processPacket
FINE: SWissServer: Client OS is WINDOWS_PRO_XP
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil parseClientAddrList
FINE: IP=/172.19.5.11, MAC=00:1E:4F:53:97:7D
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.Shell writeToClick
FINE: /proc/click/intern_arpq/add_interest-->172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.Shell writeToClick
FINE: /proc/click/intern_arpq/remove_interest-->172.19.5.11
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: IP=172.19.5.11, VLAN=19, OS=WINDOWS_PRO_XP
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Default Provider=Local DB
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Providers=Local DB;
Nov 27, 2009 8:56:18 AM com.perfigo.wlan.jmx.admin.SWissUtil getOpProviderListData
FINE: Number of providers=1
The IP address 172.19.5.11 is the IP of the PC during the unauthenticated role; what the user is finally seeing is the CCA Agent asking for user and password instead of using the ADSSO.
The version of the Agent is 4.1.10, the NAS and NAM are running 4.1.8 and the only ackword thing is that the Active Directory Servers are running Windows 2000 SP4.
Any assistance would be much appreciated.
Thanks,
DL.Hi,
I too have the same error , Any one knows how to resolve this
Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.028 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSServer - accepting ADSSO socket ...
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler - processing socket ... Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler - TIMEOUT_SET FOR ADSSO SOCKET ... Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.041 +0530 DEBUG com.perfigo.wlan.jmx.adsso.GSSHandler - reading peer's token_length from Socket[addr=/10.80.0.220,port=1583,localport=8910]
2010-09-28 10:57:38.670 +0530 ERROR com.perfigo.wlan.jmx.adsso.GSSHandler - IO Error: Socket[addr=/10.80.0.220,port=1583,localport=8910] null
2010-09-28 10:58:40.215 +0530 INFO com.perfigo.wlan.jmx.adsso.GSSRetrier - GSSR - Windows SSO is running
2010-09-28 10:59:26.308 +0530 WARN org.apache.commons.httpclient.HttpMethodBase - Going to buffer response body of large or unknown size. Using getResponseBodyAsStream instead is recommended.
2010-09-28 10:59:38.478 +0530 INFO com.perfigo.wlan.jmx.admin.OOBDelayTask - OOBDelayTask: remove temp user [00:01:80:53:67:75]/[10.80.0.220]
Thanks in advacne -
my on off button on my iPhone isn't working and it has been for several months but i went to the apple store today and the warranty was only 16 days over is it possible to get it fixed for free
If the genius at the Apple Store did not offer repair under warranty then NO
12 months is 12months asume you did not have AppleCare
Maybe you are looking for
-
on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop
-
IP address on HP B110 all in one printer
Hi. I set up my HP B110 to run from my network and had an IP address of 192.168.0.9 and everything worked OK. However, the IP address has changed to 169.254.187.43 and can no longer be accessed through the network in addition the printer cannot log
-
Why can't I scan a document to a PDF file on an L7650
I purchased an L7650 in 2008. It used to scan to PDF files. About 2 yrs ago it stopped allowing the PDF option. Why? I recently updated all the software through HP but the PDF scan option still is not available.
-
Assigning display order to prompts designed in universe
Hi, Is there a way assigning display order to prompts designed in universe? Currently I have achieved it though appending numeric numbers like 1, 2...at the begining of the prompt text. But when I added a new prompt it is coming in between of the exi
-
No document type defined in mapping rule
Hi, Information on document type is need to be loaded from SAP R/3 to BCS for reporting purpose. Customised doc type with assigned role - subassignment already defined. Problem is i still don't see the document type (fiels) for selection in mapping r