My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.

Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional.

Similar Messages

My iphone just was updated yesterday and now my calendars won't synch, how can I get this to work again?

I just updated my iphone4g and now when synching my calendars will not update. How can I fix this?

System restore can do that, I recommend to avoid using system restore, it can create problems as well as solve them.
Try deleting the Firefox installation directory and then re-installing Firefox 3.6
For 32 bit Windows the default location of the [http://kb.mozillazine.org/Installation_directory installation directory] is C:\Program Files\Mozilla Firefox\
You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

My ipod touch is stuck on the apple logo. i restored and updated it with itunes and now it wont get off the apple logo. what does this mean and what do i need to do?

i was trying to delete some songs from my ipod. so i plugged it into itunes and it froze. i help the home and menu button to reset it and now its stuck on the apple logo. i plugged it back into itunes, it updated the software i dont know if it restored the ipod. but now its stuck on the logo and it keeps going to the white screen and then back to the logo. what do i do?

Try restoring. Make sure you have a backup first.

Alright i have a wifi problem i just got my ipod and it says no wifi under the wifi thing what do i do

i have a problem with my wifi this is my first touch and i dont know what no wifi means my cousin can connect hers i cant connect mine please help!!

Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

I am trying to update my ipad from iOS 4.3.5 to 6.1.3. 6 hours ago it said 49 hours and now says 53 hours. I am using a wifi connection. Why is this taking so long? at this rate i really don't see any progress. Please help!

I am trying to update my ipad 2 from iOS 4.3.5 to 6.1.3. 6 hours ago it said 49 hours and now says 53. I am making no progress. Please help. I am using wifi connection.

You have to connect the iPad to your computer to update.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

I just updated my iPhoto and now am asked to download the iPhoto Library Upgrader. I am asked for a password. I do not know it. How can I find it or reset it?

Name: O

I just updated my iPhoto and now am asked to download the iPhoto Library Upgrader. I am asked for a password. I do not know it. How can I find it or reset it?
Are you asked for the password, when you run the installer for iPhoto Library upgrader?
Then the installer is asking you for the password of your administrator account. You need to authorize the installation.

I restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?

i restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?

You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808

HT4009 I purchased extra lifepoints for my Sims FreePlay and they never got added to the game. EA Games seem uncontactable about this issue, they say it's an iTunes problem.

I purchased extra lifepoints for my Sims FreePlay and they never got added to the game. EA Games seem uncontactable about this issue, they say it's an iTunes problem.

And. . . your question is?

"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?

Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

My Black Macbook froze using Safari. I forced quit and restarted. Before the chimes there was a single buzz, from below the keyboard. What's that all about?

My Black Macbook froze using Safari. I forced quit and restarted. Before the chime, there was a single buzz, from below the keyboard. What's that all about?

http://support.apple.com/kb/HT2341
Might be RAM related if the above tip describes what happened.
If not, and your data is not backed up, and it won't startup, read this tip:
https://discussions.apple.com/docs/DOC-1689

My itunes is playing up. every time I play a track or album I get a crackling interference noise. What's this all about and how can I stop it?

my itunes is playing up. Every time I play a track or album I get a crackling interference noise. It sometimes abates for a while but then comes right back again!What's this all about and how can I stop it?

See if this article will help:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

HT5172 I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????

I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????

Try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself.

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

Similar Messages

Maybe you are looking for