My iphone just shows the apple logo
I tried to completly reset my iphone (deleting all files) but it just shows me the apple logo i tried to shut is down (hold the sleep/wake button) no reaction
I tried to hold the home and sleep wake button for 10 seconds just the apple logo is back
AND the iphone is not shown under Mac OS X 10.6.2 or itunes and it is not shown under windows
WHAT can i do to get i back to life???
thanks for your help!!!
Put your phone in DFU (Recovery mode) and reload the firmware.
See this link
Similar Messages
-
how can i reset my iphone? I chose to reset my settings and all I see now is the apple logo, but does't want to reset.
Try this reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, restore the device > iTunes: Restoring iOS software -
i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!
Follow the instructions here > http://support.apple.com/kb/HT1808
Note: You may need to try it several times to get it to work. -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
HT201263 why does my itouch just show the apple logo and nothing else?
i went into my settings to restore all data and content, and it said it might take up to 4 hours so i let it do that and when it finished it just showed the apple logo when i restarted my itouch, i can reset it any time but itll just stay in the apple logo screen, and i tried restoring my itouch but it said it wouldnt let me for some reason. what do i do?
Because the iPod is sick.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPhone 4 is just showing the apple logo, then it changes to the connect to iTunes symbol, when I connected to the PC and tried to restore and update it shows an error, it seems it cannot recognise the phone, is there anything else I can do to get my phone working again?
Hi serpico656,
When you got the error restoring your iPhone, did it include an error number or description?
For an overview restore troubleshooting article with links to details, see
Resolve iOS update and restore errors in iTunes - Apple Support
If you know the update error number check out,
Resolve iOS update and restore errors - Apple Support
Take care,
Nubz -
My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
TS1363 Iphone just shows the apple and blinks on and off.
Iphone just shows the apple and blinks on and off.
Hello grumpy48,
The article linked below details a number of useful troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
If you can help me facetime me at [email protected] or msg me.It would help to know whether it ever did work, or is this a new iPad for you? If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it. If it used to work, try doing a reset.
-
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
My daughter Nano just shows the apple logo and that is it can'y do anything with it.
My daughters Nano just shows the apple logo and that is it we can not do any thing with it.
Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)
-
Apple TV hanged and is now just showing the apple logo
Guys,
My aTV2 just hanged.
I tried a reset but now she is hanged on the boot and is now just showing the Apple Logo.
I tried another reset by pressing Menu+Down but again now I'm back on the boot and just showing the Apple Logo.
aTV2 LED is blinking.
Any idea on how to do this?
Thanks,Have you unplugged from power and restarted?
If so, get a micro USB cable, hook it up to a computer with that cable alone, fire up iTunes and do a restore of the AppleTV firmware. -
My Apple TV is just showing the apple logo on my screen and light just flash on the Apple TV box
Welcome to the Apple Community.
Which Apple TV do you have. -
I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.
http://support.apple.com/kb/HT1808
-
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
How to set language in SMS editor ?
Hi, I use Nokia C-50. Since some time I cannot write SMS messages, because strange letters appear in SMS editor. Options -> Text language show me that Cestina language ist set. This is the first from the choice. When I set any other language like Eng
-
How to hide or rename the HP Printer's Mac address from Lion Finder Sidebar
I have an HP d100a all in one printer, and since upgrading to OSX 10.7 (Lion), my printer's mac address shows up in the Finder Sidebar under Shared devices. I understand this is for the printers SD card slot to be shared over my network, however the
-
Trying to write an SQL import script
Hello All, I am trying to write a bulk importer for data for my clients and I am just about there. However I am running into a problem updating records in a second table. I want to do all this through the SQL Server for resource purposes. The SQL sta
-
Length of field TEXT in structure MTREEITM
Hello, I would like to build up a tree control but the lenght of the field TEXT seems too less(72 chars) in structure MTREEITM. I would like to use strings with 255 characters in the tree. Is any other way to build up a tree control and not using str
-
How can I change Dreamweaver editor backgrounds in CS5.5
I've recently upgraded from DW8 and have two small problems with the user interface. 1) I can't easily read the inactive document tabs on the documents bar (or whatever it is called) because the text is black and the background is dark gray. Is ther