My iPhone just turned on after some damage but the brightness will not change and I can't see anything how do I change it.
My iPhone had water damage and I have had it in rice for at least a month. This morning it started to play music and I got so excited. I plugged it up and left it and when I turned it on the brightness was all the way down. So I thought I just left it this way by when I tried to change it my phone said it was all the way up. I would want to use this phone again how do you change the brightness?
Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Also, plug it in to mains power and let it fully charge.
Similar Messages
-
Hi, I have just tried downloading the Facebook app, but the app store has frozen. It will not let me click on anything. Shall I try turning it all off and back on again? Or is there something else I need to do.
Thanks, RebeccaReboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
After downloading and installing Adobe Flash Player 11.6 on my HP Laptop w/ Windows 7, The player will not work. Every time i click on a video it tells me that i need to install Adobe Flash Player. I have followed all the trouble shooting steps on the Adobe site, I have uninstalled it and reinstalled it again and still it does the same thing...In Adobe trouble shooting steps where it checks to see if there is another Adobe Flash Player installed on my computer, it can not find where there are any installed....so what do i do???
What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
Following the automatic update of Firefox, which happens when I open it, it often occurs that I can't do anything in Firefox. All the tool bars appear, but below is a white screen. When I click on a bookmark, nothing happens except the word "Done" appears in the lower left corner and the screen remains white.
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites - "Error_loading_some_websites" -
What should I do?
Not sure where you purchase your MacBook from, though you'd better call Apple tech suppost first then take it to Apple Store Genius Bar.
-
i installed ios 7.after that my primary cam, one day it just stopped focusing and the pictures are blurry. If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?
This advice will sound like a joke or prank, but believe me it worked on my iPhone 5 and my daughter's. The lens mechanism got stock on each of our iPhones. We found a post on these message boards that said to hold the iPhone about 6 inches above a table or counter top and drop it so that it lands flat on it's back. Now try the camera ...Fixed! It has been more than six months now and neither of our iPhones have ever experienced the problem again.
-
Just started up iPhone 4S and done something wrong, I have speaking on all buttons and apps, I would like to switch it off but the phone will not scroll?? Please I'm going mad!!
triple click the home button. Then you can go into accessability options in settings and turn off that feature
-
I purchased the iphone 4s from uk and I came to Pakistan and the phone was new. after arrival I placed a pakistani sim but the sim is not recognised and phone is blocked.
Where exactly did you buy the iPhone and was it new or used
-
My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?
Sorry, no.
-
My iphone 4s will still work and is still turned on but the screen will not light up. its completely black and my top button is broken.
Apple won't replace an iPhone under warranty if the iPhone has been opened/tinkered with by you or by a 3rd party, but they may under Apple's out of warranty or not covered under the warranty "repair" price.
There is only one way to find out for certain. -
Just bought a new replacement phone at the apple store and as soon as I got home, vertical lines came up through the screen and now it's extremely blurry. All the functions of the phone still work fine and I really can't see anything except a small part of the screen at the top. I called the apple store and he told me to put the phone in recovery mode on my computer and the restore and update it. I did this and I can tell the phone has restored yet it is still extremely blurry and I can't see anything to type it in. Is there anything I could do with this? The apple store is over an hour away and saving another trip down there would be great. Thanks
Bad luck. Take ti back.
-
Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing!! and i want to know why is happen
Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
Regards. -
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support. -
After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this? -
I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do? do I just need a new screen or what? I'm freaking out here
Don't freak out, just get over it. It's probably done.
What should I do if I drop my phone in the toilet?
Apple may offer you an refurbished iPhone in exchange for yours, for about half the cost of a new one.
I wouldn't be too specific about just how it got wet
Maybe you are looking for
-
How to apply style to submit button
Hi All, I am developing an application in struts where I have multiple buttons on a single form. Each button corresponds to different action to be executed, and to achieve this I have used DispatchAction. Since I need to submit the data, I am looking
-
IPod Touch with iPhone 2.0 software
Quite recently, my uncle gave me his iPod touch (1st Generation) as a Christmas present because he was going to buy an iPhone 3G. I already have an iPhone, so I was wondering if the software used on it is compatible with my Touch. I don't wanna spend
-
Tried to finalize my movie. Not enough heap(?)
Tried to finalize my 28 minute imovie. Aftrer 2 plus hours computer said "error, not enough HEAP" How do I correct that. I must add that I did finalize once completely but had to redo part.
-
Materialized View - "use log" and its "master table" assigned
Oracle 10 g R2. Here is my script to create a mv, but I noticed two interestes properties by EM CREATE MATERIALIZED VIEW "BAANDB"."R2_MV" TABLESPACE "USERS" NOLOGGING STORAGE ( INITIAL 128K) USING INDEX TABLESPACE "BAANIDX" STORAGE ( INITIAL 256K) RE
-
Parsing xml using the .text() function in as3
I am accessing an xml document in actionscript, I know flash can see the xml as I am tracing it but when I add the .text() funtion to my trace to strip out the tags by trace doesn't see anything. this works... function LoadXML(e:Event):void { xmlData