My iphone no longer connects to itunes

My iPhone is no longer recognized by iTunes as it has for over a year.  iTunes and all other software run correctly otherwise.  I've run through all the Apple tips, including reinstalling iTunes, although I didn't delete any files first as Apple suggests.  The iPhone driver shows correct operation in the hardware config file.  I suspect some routine security update is the problem as I do keep my software up-to-date.  I've never had a problem with the iPhone previously, or the connection to iTunes. I'm running out of ideas. The system is a Lenovo T510 Thinkpad in excellent condition, Vista 64 bit os.  Any suggestions would be appreciaed as I'm out of ideas for now.

Hello Ingrid,
Thank youj for using Apple Support Communities. 
You can use the following article to troubleshoot your Wi-Fi connections wit your iPhone..
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Regards,
Jeff D.

Similar Messages

  • IPhone no longer connects to iTunes via Wifi

    On July 1,12 my iTunes did an automatic update.  After the computer restarting and I entered iTunes and the following messages appeared:
    Message 1: Must reinstall itunes to connect to ipod or mobile devices.
    Message 2: CD/DVD folder must be located in itunes folder in order to use with itunes
    I have 2 iphones (both 4s, bought at same time, both running iOS 5.1.1)and one will briefly connect to itunes via Wifi (I will identify this one as iphone1) but the other one will not (I will identify this one as iphone2).  I have a PC with Windows 7.
    When iphone1 is connected to itunes via wifi is disconnects randomly.  Under: Summary > Version, it has the message: Connect this iphone using a USB cable in order to update or restore its software.  When I have it connected with the USB cable, there are no problems. The settings selected under: Summary > Options > are: Open iTunes when this iphone is connected, Sync with this iphone over Wi-Fi,  & Manually manage music and videos.  The Setting under Backup > Back up to this computer (where it backs up to; I do not know)
    iphone2 does not connect via Wifi but used to.  It connects without issues with the USB. The Settings in iTunes > Summary are the same as iphone2 except that iphone2 is set as Backup > Back up to iCloud.
    My iphone2 is my primary device.  I use it exclusively; for music, taking photos, syncing photos to my Photo Stream folder on my PC, etc.  The iphone1 is my spouse's secondary phone, so its not used as often (ie: only has 4 songs downloaded, used to take the odd picture, has a mirror image of apps from iphone2).
    I searched Apple Support and tried the following solutions that didn't solve this problem:
    How to restart the Apple Mobile Device Service (AMDS) on Windows (support.apple.com/kb/TS1567) &
    Set the Apple Mobile Device Service Startup type to Automatic
    I have not done this: Remove and reinstall iTunes and AMDS. I did goto the: iTunes for Windows: Device Connectivity Tests > iOS > iPhone - iTunes Troubleshooting Assistantand into iTunes > Help > Run Diagnostics.  The results were: All tests passed. (My iphone2 was plugged in with USB. The iphone1 was connected via WiFi.)
    What do I do now?  Do I need to remove and reinstall iTunes? and if so will I lose all my itunes info (videos, music, apps, settings) or will it just show up after I install iTunes?

    Hi Mitch,
    It sounds like you have already done many of the steps, but I would like you to look at this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    and go over any that you may have missed.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Ipad and iPhone no longer connect to iTunes, just get spinning wheel

    I have a iphone 5 with the latest IOS software and a Ipad 3 again with the latest IOS software and I used to connect them to my macbook pro 2013 model (Maverics) through a USB cable for backup purposes.  Now when i try to connect to Itunes all I get is a spinning disc and no functionality.

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Application Support/SyncServices
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • IPhone no longer connects to iTunes.

    I added music to my library last night . When I went to connect to iTunes this morning the phone wouldn't connect. It vibrates saying it's plugged in, asks if I trust the computer (yes) then vibrates again as if saying not connected even though it's charging. I've tried reinstalling iTunes, restarting both phone and computer, deleting phone driver and reinstalling it. Nothing works. I have a windows 8 that I just recently updated to 8.1 last weekend, fully updated iTunes and updated iOS for my phone. This is driving me crazy. Please help.

    Hi Mitch,
    It sounds like you have already done many of the steps, but I would like you to look at this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    and go over any that you may have missed.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT1369 iphone no longer connects to itunes

    my iphone 5 has all of a sudden stopped automatically syncing with itunes, the rest of my tablet, ie, my pictures recognises iphone but not itunes

    Hey Stace1986!
    Try utilizing this article to help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Since updating my iPhone 3gs to ios6 I can no longer connect it iTunes. How can I fix this?

    Since updating my iPhone 3GS it IOS6 I can no longer connect to iTunes. How can I fix this? I checked the settings for iTunes and it appears to be correct.

    I have now managed to sign into iCloud but I still don't seem to be able to sign up my Apple ID for iMessage

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • My iPhone 4 will no longer connect to itunes

    ever since i updated to the latest Itunes my iphone 4 stopped connecting to itunes. it will still charge but wont go through itunes. im on a windows 8 laptop

    Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

  • Ipad 1 no longer connects to itunes

    Updated both my iTunes to the most current and my iPad 1 to 5.1.1. Now it no longer connects to iTunes and gets an error message.

    Howdy Graham Burnette,
    It sounds like you’re tapping Trust when you see the Trust This Computer alert on your iPad, but the device isn’t appearing in iTunes. Take a look at the two articles linked below, and Reset Location & Privacy settings if you see the alert each time you connect your iPad to your iMac, then follow the suggestions in the second article to resolve the iPad recognized by iTunes issue.
    'Trust This Computer' alert on iPhone, iPad, or iPod touch
    If you tap Trust, the computer will be trusted until you untrust all computers or you erase the device. If you tap Don't Trust, you'll see this alert each time you connect your device to that computer.
    If you're using iOS 8 or later: To untrust all computers, tap Settings > General > Reset > Reset Location & Privacy. This will also reset your location and privacy settings. You can also untrust all computers by tapping Settings > General > Reset > Reset Network Settings. This will also reset your network settings.
    iOS: Device not recognized in iTunes for OS X
    I hope this helps,
    -Jason

  • I have completely disabled my iphone 3gs. It says "Iphone is diabled connect to itunes", but when I connect it to itunes, itunes says "could not connect because it is locked with a passcode you must enter your passcode on the iphone before it can be used.

    My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks

    You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808

  • Remote no longer connects to "iTunes 10.1.2"

    Hi guys,
    I just upgraded to iTunes 10.1.2 and now Remote 2.1 can no longer connect to iTunes. It worked just fine before the upgrade. Anybody else having this problem? Ideas how to solve it?
    Josef

    OK IT IS WORKING FOR ME NOW.
    I am not sure if this is what fixed it, but it wasn't working, I did the following and now it works. It's worth trying...
    - In iTunes preferences under "sharing" I un-checked "share my library on my local network" and hit OK.
    - In iTunes "advanced" menu bar, clicked "Turn Off Home Sharing" and then turned it back on.
    - Re-checked "share my library on my local network" under preferences.
    - Quit and re-start iTunes.
    Again, I don't know which of these steps fixed the issue (if any) but now both my remote app (iPhone4) and AppleTV (2nd gen) connect fine to my iTunes 10.1.2 library.
    Good luck!

  • Trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

    trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

    iTunes version 10.7 requires at least Mac OS X version 10.6.8 if you're running a Mac, or Windows XP Service Pack 2 or later if you're running Windows.
    Is your computer up-to-date enough for iTunes 10.7?

  • Get message on iPhone 4S, "Cannot connect to iTunes Store." How can I access the iTunes Store?

    I get a Message on iPhone 4S, "Cannot Connect to iTunes Store." How can I access iTunes Store?  Yes,  I am WiFi connected.

    Well folks I finally got my "can't connect to iTunes" issues fixed. Seems that there was an unauthorized change to my email address and account therefore not allowing mr to connect to iTunes.
    Here is how I got it fixed.
    1. Contacted iTunes store support
    2. Followed their instructions and replyed with the following info:
    An order number from one of my purchases
    Last 4 digits of the c.c. Used for the iTunes store acct
    Answer to one of my security questions
    And 2 items from this list.
    Birthdate
    Billing address for Acct
    Phone number on acct
    It was after all of this that they saw that someone had made an account modification back in February when the issue began. Seems they changed my email address just slightly and that is what kept me from being able to sign in and not a password issue. This was likely due to a phishing email that came out in conjunction with iCloud asking users to change their passwords to a more secure form by adding a capital and number.
    To get all of this cleared up it took about 4 days as we emailed back and forth. I also needed a seperate email address they could use to send me info. Once they determined the issues and went to get them fixed by changing the email address associated with the acct and I created a new password I was able to access iTunes with no issues and even my previously thought lost acct balance was there.
    Hope this helps
    Crash

  • My ipod will no longer connect to itunes

    My ipod will no longer connect to itunes except for while it is restarting. However once I get to my log in password it disconnects. Also my computer does not seem to recognize my ipod yet it still manages to charge it even though it is not recognized. I have tried unistalling itunes/ installing it again. I can't seem to reset my ipod, and I have turned off my firewall and disabled my anti virus. Nothing seems to work and I am losing my patience. This just happened out of no where. Does anyone have any suggesting about what I could do?

    May somebody please help me?

  • Can no longer connect to iTune store - "server is down" message

    Suddenly I can no longer connect to iTune Store via my AppleTV
    What should I do? Many thanks

    Wait for the server to come back.  If the server is down, then there is nothing you can do about it, and you must wait for apple to get the server back up and running.

Maybe you are looking for

  • Release of break down maintenance order

    Hi, In Configuration ,I have put flagg in "release immediately" check box  for Breakdown Maintenance order ,my requirement is to release this breakdown order immediately while creating the order, which is not happening but in case of preventive maint

  • CRM Business Package 5.0.0 SP1 in Netweaver Portal 7.3?

    Hi, at the moment we have a Netweaver Portal 7.0 with CRM Business Package 5.0.0 SP1. We are planning to upgrade our Portal to Version 7.3 but are not able to upgrade CRM to 7.0 at the moment, so we have to stay a while at Version 5.0. Could anybody

  • Cant find item document tab on product catalog

    hi, I have created a product catalog but while adding products to the catalog area i have chosen Edit->Product hierarchy->......,(i.e.,products added directly from the  product master) instead of adding the products to the catalog area manually,but t

  • Transporting problem gui_status to live system

    Hi gurus, I have a problem transporting  gui status to live system.In development system area(se80),I see the gui_status folder but when I'm transporting the all program to live system,gui_status is missing.Can I get request only for this gui_status?

  • Cannot create MOLAP dimension - already exists

    Hi, I am trying to deploy a dimension but OWB seems to think it still exists. I get the following error :- "Cannot create dimension STOCK_CODE.DIMENSION. AW dimension with logical name STOCK_CODE alredy exists in schema DW." If I try to drop the dime