My iphone no longer connects to my itunes after new update

i have iphone 4s and did apple software update yesterday for my iphone, since then it hasent connected to my itunes account and keeps asking for a 1.11 update which iv already done. its really bad how its not working anymore, i use itunes to save things that may be deleted later.

See Here  >  http://support.apple.com/kb/HT1808
You may need to try this More than Once...

Similar Messages

  • I cannot connect to iTunes after new update on iPad air

    I Cannot connect to iTunes or App Store after new update and I have tried all the trouble shooting stuff....no good. When I close the app the contents are there but when I tap on them the error message comes up and the app contents goes blank....Help. I need them for my business.
    thanks

    Hello Deryn340,
    Thanks for using Apple Support Communities.
    If you're currently unable to connect to either the iTunes Store or the App Store on your iPad, then I'd like you to please follow the troubleshooting steps outlined below.
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time. 
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    If the steps above didn't resolve your issue, be sure that your specific alert isn't listed as a possible iTunes Store error. Then, if your issue is still unresolved, follow these steps.
    Can't connect to the iTunes Store - Apple Support
    Cheers,
    Alex H.

  • Iphone 5 no longer connects to my PC after last update OS8.1

    Firstly I am not a "tech" expert and really do not understand the whole lingo etc - in fact I find it VERY overwhelming whenever I have an issue that needs to be solved with all the massive volume of technical jargon thrown around and end up being totally lost and frustrated - so if there is anyone who can help that will be just wonderful.
    I have an I-phone 5 and a Toshiba PC which runs Windows 7 - easy so far.
    I use my phone for a small business (otherwise I wouldn't have one at all) and when I go to do quotes I take photos and then downloaded them to my PC for future reference (I have ALWAYS been able to do this by simply plugging my phone into a free USB port (always use the same one for all devices) and away we go all works great.
    HOWEVER, since the last 2 updates my Iphone will no longer connect to my PC.  After the first one was botched (the one that was recalled quickly) and OS8.1 (which I know have) - whenever I do this exact same procedure my Iphone does no longer appear.
    How do I make it work again - the simple, easy, straightforward way that it used to (I guess that since the Apple thing has now been "improved" and made "better and easier" for me it will be impossible to do?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • IPhone no longer shows up in iTunes: can't update files, etc.

    Hi there,
    For some reason (and I don't think it's the USB connection... I've tried two) by iPhone no longer shows up in the iTunes window when I connect it to my MBP. Consequently, I can't update my Address Book, or anything like that.
    Does anyone know what I can do to correct this? I've tried restarting the phone (a 3G, by the way, running the new OS)
    Regards, Malcolm

    Malcolm Hamilton wrote:
    now I have no music in iTunes. Luckily, I'd renamed my iTunes folder, and moved it onto my desktop. I thought it would be a simple matter of replacing the new (empty) iTunes folder with my old one, but this doesn't seem to work. Can someone tell me the best was to get my 3,000-odd songs (and the folders/playlists they're in, etc., back into iTunes?
    If you move and rename the the iTunes folder you won't see any music in iTunes the next time you launch it. You can quit iTunes and rename it then put it back or leave it and launch iTunes while holding Option to choose the location of the iTunes library.
    See these articles about the iTunes library for more information:
    How to open an alternate iTunes Library file or create a new one
    iTunes for Mac: Moving your iTunes Media folder

  • My iPhone won't connect to the Internet after new year. What can I do?

    WHy won't my iPhone 6 connect to the Internet after the new year? My wife has the same phone and it works. I have tried wifi or lte. I woke up this morning jan 1 2015 and it will not connect to anything.

    Settings>General>Reset
    Choose Reset Network Settings
    Your phone will restart. Test internet after that.
    ~Lyssa

  • Cannot sync iphone 4 with itunes after new update to ios 7

    Help..
    After update to IOS 7 on my Iphone, and Itunes update to 11.1.1... I am unable to sync my Iphone 4.
    Itunes detects my iphone and does a clean backup. It also starts sync and shows upto 5 steps. Reaches the last step and keeps on working on that step in itunes. The sync indication on the iphone is lost during this last process.
    Result i cannot sync new songs on my iphone. I also have an ipod and it sync well with the itunes. NO PROBLEM WITH IPOD..
    Any suggestions.. Pls help me...
    Thanks to all in advance..

    Problem solved
    I restarted iTunes !

  • Printer No Longer Connects to Base Station after Airport Update

    I recently installed the Airport Update and ever since my printer is no being seen by the Base Station. Before the update everything was working perfectly, now nothing. I've tried every possible solution I can think of with no luck. My printer is an Epson SP2200 and I'm trying to connect to an AirPort Extreme Base Station.
    Anyone have any suggestions?
    Thanks in advance.

    The firmware is almost certainly the problem.
    I have had this exact problem, had a samsung clp-300 working fine on an airport extreme for months, then the whole thing went pair shaped after a firmware update
    Go to the link with instructions
    http://discussions.apple.com/thread.jspa?threadID=1641516&tstart=0
    I have solved my issue with airport and printer loss of recognition. Open Airport Utility and install Firmware 7.2.1 over the top of 7.3.2. Firmware versions are in a simple drop down list. Steps are: 1) Open the 5.3.2 version of Airport Utility 2) Select the Airport Extreme icon in the picture list on the left 3) Click Manual Set-Up button at the bottom 4) Menu "Base Station" -> "Upload Firmware"
    5) Select Firmware 7.2.1 from the dropdown list.
    I tried this and it worked a treat. The problem is now resolved. I am using 10.5.4 on my iMac, but using 10.4 on a couple of macbooks as well. They are all functioning fine after I got rid of the update

  • Ipod wont update songs from itunes after new update

    I downloaded the new itunes update 5.0 and now i cant update my ipod. it keeps telling me that there is not enough room on it. so i unchecked about 1000 songs and it keeps on saying the same thing. it also took about 3000 songs off my ipod. the only way it will update is if i let itunes update it with a choice of songs they pick. please help.

    Hello All,
    I think I came up with a work around by accident and didn't realize it until I read this post.
    Did all the same stuff most have done, reset to factory, reapplied the updates, etc, still not enough free space, even though there was plenty before.
    Sooo, I went into iPod options, changed from "Automatically update all songs and playlists" to "Automatically update selected playlists only". I did this assuming that the amount of space used on my iPod would be cut in half, at least. So I sync'd and when it was done, my iPod was back to the way it originally was, having about 800MB free on a 30GB G3 iPod. Hmmm... so I looked at the pref's again and realized that the "Only update checked songs" was still checked. I have been using this setting for at least the past two years after my audio collection began to exceed my 30GB iPod's capacity. So in the end, it ended up syncing just my playlists PLUS anything that was checked which brought me back to where I started before I made the jump from 4.9 to 6.0.1. The only difference was the switching the setting "Automatically update all songs and playlists" to "Automatically update selected playlists only". Very odd. I suspect a lot of users got in trouble on this one.
    Please let me know if this fixes the problem for anyone else.
    Kindly,
    James

  • My iphone 4 will no longer connect to my Itunes since 7.1.1 update itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected

    my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
    any Ideas cheers

    Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. Solutions?

    My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7.  There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • ATV2 no longer connects to the iTunes store

    My ATV2 no longer connects to the iTunes store, however, it used to work without any problems at all. Please help!

    There is a fault with iTunes and apple tv 1
    See this thread
    https://discussions.apple.com/thread/6099057?start=165&tstart=0
    Report it to apple

  • With verson 12.01.26 my iTunes can no longer connect to the iTunes store or iTunes Match

    After downloading iTunes version 12.01.26 on my PC my iTunes can no longer connect to the iTunes store or iTunes Match. My itunes displayed a message at the top that it was connecting to the iTunes Store. After closing my laptop and opening it again after a few hours, there was a message stating that my computer was unable to connect to iTunes because of a problem with my internet connection. My laptop is connecting fine with the internet, yet not through the iTunes program, or at least it seems that way. I'm not positive but  feel like the issue may have stemmed when I downloaded the new version, I think maybe I messed up the process somehow by closing my computer or something.

    Hello there, gracieflad.
    The following Knowledge Base article offers some practical and detailed steps to help resolve issues with not being able to connect to the iTunes Store with iTunes on your Windows computer:
    Can't connect to the iTunes Store - Apple Support
    Thanks for reachign out to Apple Support Communities.
    Cheers,
    Pedro.

  • I can no longer connect to the iTunes Store on my laptop, what could the problem be?

    I can no longer connect to the iTunes Store on my laptop, what could the problem be?

    Hi curterb,
    If you are having issues connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    - Brenden

  • TS1398 Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

    Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

    not much response in here which surprises me...
    Anyway... AS I am still looking for answers, I will share a couple of points that I realised...
    in Airport Utility, I noticed that my iphone MAC address was actually showing as client connected, despite my phone network showing the spinning wheel next to the network name for ever and never actually connecting.
    I am currently testing the router mode in Network to be on DHCP and NAT mode with a range from .2 to .200
    My phone is now connected....
    Everything seems to be ok and happy so far...
    strange that this router and phone have worked together for at least a couple of years, the phone works everywhere else, and all other toys connect to my WIFI just fine. the list is as follow:
    airport extreme
    Zeppelin air
    2x apple tv
    2 ipads
    iphone 4s
    2 mac
    1 pc
    I have litterally just hard reset the router with a pin just now as a last resort... same...
    I will leave the router as DHCP & NAT until a potential firmware or OS update...

Maybe you are looking for

  • Macbook air camera not working

    My front facing camera isnt working. Video feed is garbled and sluggush or not working at all? Macbook Air 2012 ( July) M Lion. Does anyone have any suggestions?

  • SQL Server Memory

    Hi All, I am not sure if this is a fair ask or no but this is something i want to learn much internals about sql server memory and how sql server responds to memory pressure and i wanted to see that practically. Environment : windows 2003, 4 GB physi

  • BEA-010061 + BEA-010096 JCaps queue set up via annotations

    Hi, I was trying to set up jcaps queue but unable to do so. Have created a wl jms queue and it works.Was trying to port over the configuration from the xmls to annotations. Spec: WL v 10 xmls: ejb.xml: <message-driven> <ejb-name>xxxBean</ejb-name> <e

  • Where to find the MAC address?

    I just purchased the latest iPod Touch. I need to know the MAC address to register with my WI-FI. Where do I look for it?

  • Accès au fichier de configuration.xml

    Bonjour, En utilisant un exemple de projet de labview, le fichier de configuration .xml du programme créé se trouve dans le dossier du programme. Cela ne pose pas de problème tant qu'on est en mode développement mais lorsque l'on créé un exécutable e