My iPhone no longer works with my wi-fi network.  It detects the network but can't communicate, even though it did so until today for months.

My iPhone no longer works with my wi-fi network.  It detects the network but is unable to communicate, even though until today it worked great for months.  The network is Verizon FiOS Internet on an M1424WR router.  PCs and iPad continue to work with the same network without any problem.  Any ideas?

have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

Similar Messages

  • My iPhone no longer works with external speakers

    Since upgrading to the 3.0 software, my iPhone (the original 2G model) no longer works with the speakers I have, or with my DVD/surround system. Previously it worked fine! Has anyone else experienced this. I'm so disappointed, as I use the speakers/surround system a lot to listen to music.
    If anyone could help, I'd greatly appreciate it

    OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

  • Sync iCloud-enabled iPhone no longer works with iTunes

    Both my wife's and my iPhone 4 and iPhone 4S stopped syncing with iTunes soon after the switch to iCLoud and iOS 5.0.1.
    Both phones are setup to backup into iCLoud and to sync via WiFi to the inhouse iTunes.
    At some point iTunes decided that both devices are no longer linked with our Computer (iMac 27 OSX 10.7.2) and insists whenever it 'sees' the iPhones on WiFi or the local cable that either devive has to be initialized or restored from the latest local backup (which is outdated due to the iCloud backups).
    No way to syn music, videos, movies to any of the devices ever since.
    Anybody else having the same issues with iTunes 'forgetting' previously paired iPhones?

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • "Import GPS from iPhone" no longer working with iPhone 4 & 4S

    Hi-
    Since upgrading to the Iphone 4, the Import GPS from Iphone function has ceased to work.  The phone appears on the import screen, and photos can be imported sucesfully (and the GPS data is embedded correctly on the photo), but when you go to the places window and go to the import gps from iphone function, the window opens like it's trying to bring up the photos but nothing appears.
    This bug continues with the 4S.  This function worked fine with my Iphone 3.
    Has anyone found a work around for this?  I'm surprised this bug has yet to be fixed.
    Thanks
    Matt

    I have the same problem the screen is show something like this:
    And never stops and show any photo.
    In other way i want to use it to create an slideshow that scroll the map showing the photos, it is possible?
    An update soon to fix this problem...
    Thanks...

  • IPhone no longer works with car charger

    I bought this car charger and it worked for months, and when I got back from a road trip I got the latest iPhone OS update and now the phone tells me that "Charging is not supported with this accessory."

    Did the charger include the "made for iPhone" certification when purchased including for the 3GS?
    Your iPod Classic can be charged via USB or Firewire. The original iPhone can be charged via USB or Firewire, but the FireWire pins were removed from the iPhone's dock connector after the original iPhone which is also the same with all iPod models now. If your car charger charges via FireWire, this wouldn't work with the 3GS regardless. If a 3rd party device does not include the "made for iPhone" certification, this doesn't mean it won't work with the iPhone but having the certification ensures it - unless the device has failed.
    If there were something wrong with your iPhone, it wouldn't be charging when connected to your computer or to the wall charger either.
    If the charger includes the "made for iPhone" certification, contact the manufacturer. If not, purchase one that does.

  • Flash drive no longer works with MacBook Pro. Now says it is unformatted, but no info what to do and not lose my data. Does not show up despite multiple prior uses on the same computer.

    Upgraded to OS Mavericks in November. Flash drive that worked fine previously with Lion and worked several times with Mavericks. Now says the 8GB jump drive (Lexar) is unformatted. Disk Utility First Aid seem unavailable. It sees the drive, but on the far left left, and when highlighted, nothing can be done with it.
    How do I recover my information or reformat it without losing my data?

    I am MikeMacBP2013. Cannot figure how to reply to Kappy's comment. Kappy, your comment did not really help me. My concern is how to save my data, not wipe and use a $10 USB drive.
    In the past two hours, I wasted most of it trying to use a software program, Disk Drill by Cleverfiles, that offers a "free" version. The free version does not recover your data for you. It is not a free 30 day trial. It is deceptively advetised - it will recover data but you will not see your data untless you pay them almost $100.
    Instead of trying to recover the data on the USB drive, this program ran a recovery on my computer hard drive and any disk image it could find on my computer until I stopped and deleted it. Apparently, it collects and keeps data recovered locked unless you pay for a key to download your data. This is not clearly presented up front. Had I known, I would never have put their software on my computer.
    I need direction to a reliable recovery program that is not this sneaky and deceptive. I stopped it when I discovered it was not doing what I had clicked for it to do, and removed the software.
    I am looking for a recommendation for a program that will do what Apple Disk Utility does not do - restore the formatting that may have been corrupted, or at least recover my data files so I can put them on other portable media.
    I recently installed a CalDigit Thunderbolt Dock to get USB 3.0 on my early 2011 Mac. I suspect this may have contributed to this disk failure but will have to contact their tech support tomorrow.
    Thanks for any suggestions for a reliable free or reasonably priced recovery software that someone can attest from using really works.

  • IPhone no longer works with car audio

    I'm running a 16 GB 3G-S and it worked wonderfully for my internet music such as Pandora or listening to iHeart radio.
    The unit would sync up easily to both my new car audio systems and everything detected and played beautifully! However, once I upgraded to 4.2.1 the iPhone is no longer detected in "iPod Mode" or either receiver. I either get error codes from the receiver or errors from the iPhone that this is not supported (when it was in 4.1).
    I really loved those features for my frequent long drives. I really hope there is a fix for this problem. I did check with both receiver manufacturers and they maintain their units should work.
    Any thoughts or help is greatly appreciated!

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

    I've used my first gen iPhone with the iPod adapter/cable from my Pioneer AVIC-D3 since I first got it - and it's worked great. But after the recent update it doesn't work. I only get an "Error-11" message on the stereo screen when I plug the phone in. Anyone? This is really frustrating!
    Thanks.

    Nevermind. Did a hard reset of each and they work now. Odd...

  • IPhone No Longer Works with JBL Onstage III

    Is anyone experiencing a similar issue after upgrading your iPhone 1st generation to 2.1? Now, when I pop my phone into the JBL Onstage III, it gives me the prompt that it's not a compatible device, and would I like to put it in airport mode. It's also not charging all the time, and seems to take a few second to even recognize it's plugged in.
    Is it my phone, or is the JBL speaker system dying on me?
    Thanks,
    Chris

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • The Remote App on my iPhone no longer works with my Apple TV 1st Gen

    I don't use it that often but when I want to, I want to...u know how it goes. Since one of the updates for the Remote app on the iPhone it no longer "sees" my 1st gen Apple TV, any ideas or am I SOL? Apple TV 1st gen doesn't do homesharing does it?

    there used to be a dark gray "pad" area on the display of my phone in the remote app that I could use kinda like a track pad to move around the menus on the appletv, u could tap it, swipe it etc, that's gone cause it no longer sees my apple tv library, I can't find the library on the apple tv, is that cause homesharing isn't available and it only sees things thru homesharing?

  • Iphone no longer works in my suburban?

    after update...iphone no longer works with my infotainment system in my suburban.  Any ideas?

    Have you set the vehicle's headunit to forget the iPhone?
    Once you do, try to pair to the vehicle as if this was a brand new device.  Make the iPhone discoverable and place the headunit into pairing mode.

  • How well does the iPhone 5s/5c work with Wind Mobile?

    I'm going to be (hopefully) getting the iphone 5s or 5c soon and I'm trying to decide on which carrier to go with. How well does the iphone 5s/5c work with wind mobile and how fast is the internet with data?

    http://www.windmobile.ca/
    iPhone: Wireless carrier support and features

  • IPhone 5c not working with internet apps such as tumblr and instagram?

    We had a tiny router issue for a couple minutes but got it working quickly. Then my iPhone simply stopped working with internet apps as i said in the title. It says it has 3 bars of wifi, i tried data, restarted it, tried everthing but it wont work. Please help

    Nevermind I got it fixed.

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    Try CardMunch it works well for me

Maybe you are looking for

  • Stored Procdure date range problem

    Hi All, My Vendor created a Stored procedure which asks for a date range when first creating a standard report. Once the date range is entered then I select which data fields I want to display, etc. Once in the report, I can see the parameter fields,

  • Can I connect X-Fi to my DDTS-100 through coaxi

    I currently have an Audigy 2 ZS but looking to upgrade, do these latest X-Fi card have coaxial so i can have true Dolby/DTS through my DDTS-00 (or through an amp/decoder)?Thanks

  • 9i JDeveloper, nullPointerException, thin driver to 9i on Linux-Help

    Environment Win2K with 9i client software. I have 9i JDeveloper configured on a Win2K machine such that it can connect to a Solaris 8 environment running 9i using a thin JDBC driver via the connections in the JDeveloper navigator. It works fine. I ca

  • OnFilter event in Table UI element

    Hi, I need the coding for onfilter event in table ui element. And also i need step by step procedure for 'How to make the filter function possible in Table display'. ie. How many context nodes to be created, i have mapped on context node with bapi an

  • A question about a screen protector

    So one of the screen protectors for the Ipod Nano says, "Smooth, non-sticky surface with patented layer of UV protection to prevent "yellowing"" What does it mean by yellowing? Is the ipod screen kept from yellowing, or the screen protector itself?