My iphone not work and wrote on the screen to connect itones

now my iphone is 3GS 32GB and not work in which on its screen drwrn a USB Symble to be connect to iTones
and before the charge of battery discharge and switch off when use any applications on the iphone

Try placing your iPhone into recovery mode.
http://support.apple.com/kb/HT1808?viewlocale=en_US&locale=en_US

Similar Messages

  • Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

    Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
    So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
    Thank you for your help and time.
    Regards,
    hopeless

    If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

  • HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection?  I have even tried creating a new apple ID but the same message appears

    When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection.  I have even tried creating a new apple ID but the same message appears.  I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • Why does the swiping not work to scroll down the screen

    why does the swiping not work to scroll down the screen or swipe from side to side

    Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

  • I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

    I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

    Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

  • My cat stepped on the keyboard while I was working and somehow enlarged the screen. How do I correct this?

    My cat stepped on the keyboard while I was working and somehow enlarged the screen. How do I reverse this and return the screen to the normal size?

    I suspect the cat turned on the zoom function, simply turn it off. This article may help you that:
    http://www.dummies.com/how-to/content/how-to-change-mac-snow-leopards-universal- access-p.html

  • Portege 3500 stylus not working in parts of the screen

    my stylus on my portege isn't working in parts of the screen the parts change and are sometimes not there.
    This happened after replacing the screen but not straight away.

    Hello
    I agree with previous user and also believe that there must be some hardware problem and it must be checked properly.
    Contact service again and explain them what happen exactly. Sorry but I dont believe you can do anything alone.

  • Display has white and grey lines and blocks crisscrossing it and touch functions are not working properly on half the screen.

    I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case).  Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically.  Screen responds to touch in odd random ways, but rarely does what I am trying to do.  Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen.  Touching screen just causes phone to randomly choose something else to open.  What have I damaged?

    Shanegang77 wrote:
    What have I damaged?
    We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country.

  • The button on the side that turns my phone to silent does not work and niether does the up volume button.  I have tried restarting my phone, I did a soft reset, I checked all my settings, but nothing has worked.  Does anybody have any suggestions?

    Hello,
    I have an iPhone 4 and recently started to have some problems.  First, the button on the side of my phone, that puts the phone on silent is not working. I can move the switch, but my phone stays in silent. However, If I plug my headphones in, Then I can hear everything like I am supposed too.   Also, my up volume button does not work.  This is with the headphones also. 
    I have tried doing a soft reset, I reset all of my settings, I updated my software, I restored everything back to factory settings, and nothing has fixed it.  I bought it from best buy and can send it in for service, but the last time I sent a phone in, it took them 3 months!  and I really don't want to go without my phone that long. 
    Does anybody have any suggestions? 
    Thanks so much!!

    Sounds like it either believes that there are headphones plugged in, or the switch is broken.
    Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective.

  • My pad is asking for a passcode and the one I thought it was is not working and it disables the ipad. Does anyone know how to fix this problem ? Thanks

    Hi, I am looking for assistance on how to reset the passcode on my ipad. It is asking for a passcode & then I enter what I thought it was and it doesn't accept & disables the ipad for 15 mins. Any guidance would be greatly appreciated ast the call centre is currently closed. Thanks  Peter

    If You Are Locked Out, Have Forgotten Your Passcode, or Just Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore or have forgotten your restrictions passcode, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • Updated iTunes and now iPhone not working and had to restore to old save

    I plugged my phone in this weekend to sync with content on my PC and was prompted to update the iTunes software. I did this and then synced my iPhone. Worked ok for 24 hours, then suddenly the screen went in to what looked like max zoom, I couldn't get out of it as phone was locked. I connected to pc again and did restore to factory settings and then reload saved phone details, did this 3 times and still same problem. In the end I had to restore to a saved copy from the end of september, so lost any contact, calendar etc... updates....
    Very frustated as this took my several hours and now need to work out what is missing. Any advice, thanks

    You most likely had zoom on:
    A simple double-tap with three fingers instantly zooms in and out 200% and you can double-tap and drag three fingers to dynamically adjust the magnification between 100% and 500%.

  • Accidently shut down my Mac Book Pro during Windows 7 installation . When re-starting it says "Press any key to boot from CD or DVD". But keybord is not working . and i have the windows CD inside the drive . Pls hlp me to boot the mac again .

    I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot  boot It and the CD is also in the drive . Please help me  to boot back to Mac book Pro and give me a way to start the key bord .

    Hey rudreshchoubey,
    Thanks for the question. The following resource may help to resolve your issue:
    Boot Camp Installation & Setup Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    If Windows doesn’t install properly
    Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
    Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
    Thanks,
    Matt M.

  • Iphone stopped working, and Im in the middle of the jungle. Help!

    I'm in the middle of the jungle in Siem Reap, Cambodia and my iphone 3GS 32g just suddenly stopped working. I had been using it all day to take photos, and it suddenly went black and wont turn on. I havent dropped, or damaged it in anyway. It doesn't respond no matter what I do.
    I'm going to Bangkok, Thailand tomorrow. I''m wondering if my warranty is honored abroad here, and if there is anything I can do. I desperately need to access my phone for contact information. Please help!
    x

    I think i am having the same problem with u.
    i usually charge my iphone on a dock overnight and one day i found it switched off charging with a empty red charging battery on the screen.
    i think it did turn on a few times during the day suddenly showing 100% charged and after a while it switch itself off showing the red battery again. afterthat it never turned on again. all i get is the empty red charging battery no matter how long i charged it for. i tried resetting it by pressing the home and connect to usb or pressing the home and power button for 10 seconds but they didnt work.
    i rang up the support team and they claim it is an hardware issue and can be repaired only in the country of purchase.

  • TS5376 I have been trying to install Itunes for the past 1.5 days without success.  The method outlined here did not work and gave me the same error messages as before  Runtime error R6034 and  also error 7

    I tried the latest Apple fix to resolve the installation issues of iTunes 11.1.4 and had no success at all.  This was the fix that asked you to remove .dll files and place them on the desktop before unistalling and reinstalling iTunes.  I followed the procedure exactly and obtained the same results as before.
    Namely,
    Runtime Error: R6034 -An application has made an attempt to load the C runtime library incorrectly
    iTunes was not installed correctly.  Error 7.
    At this point, after spending 1.5 days attempting to install iTunes I am giving up.  Hopefully, someone will come up with a fix that really works and I will install it then.

    Hi
    I had the same problem on my PC's with Win 7 and Win XP.
    I solved it this way:
    - De-install iTunes, best with a special tool, like, for example "Your Uninstaller" from Ursoft. Any other un-installer will do the job, provided it cleans the registry of traces from iTunes
    - De-install "Apple Mobile Device Support". This seems to be the culprit. It is a sub-program of iTunes. But if you just de-install iTunes this sub-program stays in your PC. If you still have it on your PC and you try to update to 11.1.4, it will cause these problems.
    - De-install also "Apple Application Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
    - De-install also "Apple Software Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
    - Re-start your PC
    - Download the latest version of iTunes from the Apple webpage and install it.
    For me this worked on both of my PC's.
    Regards
    goletto

  • Disaster, my iPhone 5 felt and I broke the screen.

    As I wrote, it just felt down, let's say from 50cm and there is a line, in the screen, the goes from side to side.
    The touch works.
    Is it true that apple will change just the screen (even at an apple store) or they will replace the entire device?
    I'm s sad...

    You can puchase a replacement for $229.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax. "

Maybe you are looking for

  • Mail: how is the number # of each mail in a mailbox assigned?

    Hi there, Today I have finally transfered all my POP3-mailboxes into IMAP mailboxes. I did this by setting up new IMAP Accounts in mail and then just draging the old mails from the POP3-accounts into the new IMAP account. Now, strangely out of my 3 t

  • How do I delete an obsolete icloud account?

    I have two iClould accounts, and only need one of them.  How do I delete the other one?

  • Older airport extreme

    Trying to set up an older airport extreme for my father in law.  Airport Utility says: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is availab

  • Not enough memory (RAM) error. Can't open TIFF file.

    I can't open a 74MB TIFF file in CS5 photoshop.   I get error message: Could not complete your request because there is not enough memory (RAM).  I have 16GB of RAM and 55.5 GB of scratch disk. I am using my recently installed copy of Photoshop CS5 6

  • I need help resizing in Photoshop Elements 3...Can anyone help me??

    So I have Photoshop Elements 3 for Mac. The image mode is RGB Color, and I have a certain layer that I want resized. So I go to Image - Transform - Free Transform. Once I am done resizing the image, and I have it how I want it, I hit enter, and the w