My iphone often reverts to the black screen requiring me to restart
My iphone frequently reverts to a black screen requiring me to re-start. The battery charge appears adequate but the app that I'm on stops and I get the black screen. This does not happen if I keep the phone plugged to a power source.
Hi
Put your OS dvd , the original Dvd that came with your Mac , then hold alt key.
I found a link from youtube to help you.
http://www.youtube.com/watch?v=rrPCDbvHuMQ
good luck...
Similar Messages
-
I'm having trouble with my iPhone 4, but on the black screen with the I tune music circle with the charger below it. I just don't get it after I plugged to the computer and it's not working :.(
The screen is telling you to connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
BTW, this is the iPod touch forum -
I really need help. It's not functioning at all. It's frozen on the home screen, will not respond to Itunes, or its charger, it wont turn off, no matter how many times you hold down the Lock button. What do I do?
Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
-
the night be for the time was also off.
I tried to do this at least 4 times! the iTunes is running the restore but at the end he's failed.. he say there is an error ! I think number -1.
-
How do I change he time the screen reverts to the Log in requirement when idle.
If I do not use the system for more than a few minutes it reverts to the Login screen requiring the typing of the pasword
all day long, How do I change this time out feature to lengthenit.
Thanks O T
This question was solved.
View Solution.Hi,
Open windows Control Panel, open Personalization, click the Screen Saver link in the bottom right and in the following window adjust the 'Wait' time to a more acceptable figure and if you would rather not have to Log-on after this time period, remove the tick from the box next to 'On resume, display log-on screen'. Click Apply, then Ok to save these changes.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything. Any suggestions?
Is your iphone hacked/jailbroken?
-
my iphone is not turning on its freeze on the black screen with the apple
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?
Hey 11doski,
Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
my iphone 4s gave me the screen it gives while shuting off the black screen with the loading circle randomly idk why this happened...
i have also reset all of my settings but it did it again
-
Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!
You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
My iPhone 3gs is stuck on black screen with the apple logo, help
my iPhone 3gs is stuck on black screen with the apple logo, help
then get it replaced if that doesnt work or try to le tthe battery die and recharge
-
Iphone has the black screen.I have to do a restart.
I´ve iphone 4s ios 6.0 and 2x every day the phone has the black screen.I have to do a restart.Could you help me?, I´ve iphone 4s ios 6.0 and 2x every day the phone has the black screen.I have to do a restart.Could you help me?
I´ve iphone 4s ios 6.0 and 2x every day the phone has the black screen.I have to do a restart.Could you help me?, I´ve iphone 4s ios 6.0 and 2x every day the phone has the black screen.I have to do a restart.Could you help me?
-
my iPhone fell in the pool, I tried the whole rice thing. & It seems to only turn on show the black screen with the apple & some white lettering on top of the apple. What else can I do to get my iPhone to work again?
Time to take it to Apple and pay for an out of warranty replacement.
Allan -
I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?
I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.
Maybe you are looking for
-
Hi All, I have a JSF application that is consists of 5 pages. The first one is clear JSP page where the user have the possibility to logged in the application. After the user has been successfully authorized the JSF page redirects to JSF page that di
-
Calling a library function node much faster than labview code?
Hi, I wrote a labview routine to perform a multiple tau autocorrelation on a large array of integers. A multi tau autocorrelation is a way to reduce the computation time of the correlation but at the expense of resolution. You can taylor the multi
-
Improving Intel X1300 Video playback
Hey all. I was wondering if you could help me. At the moment my video playback in Arch Linux is not as good in Ubuntu. As ubuntu has the 'Configured Device' etc in the xorg.conf, I cannot see what settings I have for my GPU. I have compiz enabled, I
-
How to get value from one context node to otehr contect conde in diff views
Hello Guru's We have a rek which is of getting the value from one context node to other context node, for example there is Total value in BT111H_OPPT/ITEMLIST (One context node) we need to have the same Total value in the in BT111H_OPPT/DETAILS (othe
-
Hi. I was new to Frame about 14 years ago. I just got a new laptop and just reinstalled Frame 8. For some reason, when I save I get a dialog box that I have to click OK on. It says this: "Cannot be undone. Undo history will be lost. OK to continue?"