My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

Similar Messages

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • IPhone 3G screen goes black in Safari, SMS and Mail (sensor not covered!)

    This my second 3G iPhone. I took the last one in for the same issue.
    I did not use the back-up in iTunes in case there was a corrupt preference issue.
    I did upgrade/reinstall and there are still issues.
    The screen goes black as if I have locked the phone with the on/off button.
    To get back into the phone I have to hit the on/off button twice, slide the slider and continue where I left off.
    This is not because I haven't touched the phone for a time. This is right in the middle of typing in SMS, email, password on a website. It seems to happen when i am interacting with a site using the keyboard but i might be wrong.
    I am going to update to the firmware that came out today.

    I am having the same problem and have since I did the software update. I have the old iPhone is the only difference. It just goes black right in the middle of a text or surfing the web, even changing settings. I have also had a problem when done with a call and i go to hit end call but the screen never comes back to give me that option. I have had a few instances lately where someone calls and i slide the slider to pick it up and it just goes black but still vibrates and rings....its very very annoying.
    Anyone know what is going on?

  • Iphone G3 screen goes black after ending every call.

    My iphone screen goes black after ending a call. Shouldn't I have to hit the "end call" button? I'm having to re-boot the phone after every call I make. Anyone else have similar issues?

    Nathan C.,
    I know that and it is not the problem nor an explanation.
    Here is the issue I am referring to:
    When someone calls, still during the conversation when I remove the phone from my ear (in order to access the key pad, for example), or in order to hand up, the screen goes black and the phone freezes.
    In other words I cannot terminate the call or access the keys,as I remove the phone away from my ear it shuts down.
    Any help???

  • My iphone 4 screen goes black but still rings and eveything else. Please help

    I've tried a hard reset but that doesn't work. I was listening to music and went to change the song and my screen wouldn't show. My phone rings and gets texts, but the screen will not show.

    do a soft reset, hold the lock and home screen at the same time for 4 seconds, that's what fixed mine and it fixes about 90% of all problems like that on the iPhone

  • IPhone 3GS screen goes black and then turns on and off

    Won't reset, just blinks back and forth from black screen to apple logo screen. What can I do?

    Try a reset or restore

  • IPhone 4 screen goes black after swiping to unlock

    How do I fix this? I just updated my iphone software to 5.1.1 and ever since then the screen has gone black after I swipe it to unlock. I've tried resetting through itunes, I've tried doing a hard reset on the iphone itself but nothing works. I did notice when I first got the phone that the screen flickered a little bit, nothing to serious though.

    Yup I've been having the same issue as well...I figured it's a bug in the OS. SURPRISE...NOT!

  • My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

    My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

    Kbkohn wrote:
    I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back. 
    Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged.  Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
    Have you done so?  If you have, all of the data is either in iCloud or iTunes on your computer.  Replace the device and restore the new iDevice with the backup of the old one.

  • IPhone 3GS works fine, unless I the screen goes black after no use.  Then I'm stuck on the white screen until I reset the phone.

    The title kind of sums it up.  After having my 3GS for over a year without issue, it started acting up today.  I had my phone on my desk at work, and had been checking my e-mail, news, and web intermittently throughout the morning.  I set the phone down, in it's typical spot without issue.  No dropping, no hits, no...nothing.  Just set it on the desk and go about my work.
    The next time I pick up the phone to use it, and hit the button, I'm greeted with an all-white screen.  WTH?  If I press and hold the home button the phone makes a "dunk" soud, like maybe I'm enabling the voice feature.  Long story short, I can restart the phone, and reset the phone, and it's fine.
    UNTIL the screen goes dark from inactivity.  From that point on, it will ONLY come back in the full-white-screen mode UNTIL I reboot it again, in which case it's again functioning normally...UNTIL the screen goes black from inactivity.  I can hear the phone make text-alert noises as texts come in, my e-mail continues to download regularly, etc.  But it stays stuck in this white screen anytime the battery saver turns the screen black.
    Any ideas on this?

    So, I've received and installed a replacement digitizer screen / component.  The good news is that the digitizer works just fine!  Screen swipes, finger tracking, etc are all great.
    The bad news...is that it didn't fix my white screen issue.  Same symptoms...everything works fine at boot.  As long as I keep the screen from going dark, everything continues to work fine (rapidly consuming battery, of course).  If, at any time, the screen goes dark (get a call, accidentally press the top button to shut down the screen, etc), the screen will only come back on as a white screen. 
    All touch components are working fine at this time.  I've grown to remember where the "power down" swipe is located, so I press and hold the power down button, then swipe where I know the "power down" swipe is located.  Phone will shut down.
    Restart the phone, and repeat the process.  Anyone have any other ideas? 

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see

    My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see

    Instead of trying to restore through iTunes, use the Find My iPhone to your advantage.
    Either go to www.icloud.com and perform a remote wipe of the device via FMiP, or download the FMiP app to another iOS device and do it from there.
    A remote wipe will also restore the device back to factory settings.

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

  • Hi, I have an iphone4 and all of a sudden none of the apps (except the ones that came with the phone) will open. The screen goes black then it goes back to the homescreen. Any ideas? Thanks in advance!

    Hi,
    I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
    Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
    Any ideas? Thanks in advance!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

    My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

    I have a similar problem.  I restored my iPhone 5 to the latest available OS.  After completing the process the phone never restarted.  The phone was fully charged when I restored it but now refuses to charge past the red battery icon.  I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone.  The Apple logo does come on and the software fully loads.  iTunes tells me the phone will restart but never does.  I left it to charge all night but it never appeared to load the battery.  This morning I went to the Grand Central Terminal apple store for help.  A woman at the store plugged the phone in but it never charged.  She absolutely refused to believe that I got my phone in UFD mode and loaded any software on.  I don't think it is a battery issue.  The only solution I was given was to buy a new phone.  Repairing it was out of the question.  At this point the phone is completely useless.  Thanks in advance for the help.

Maybe you are looking for

  • Final Cut Pro 7 export drops frames

    I exported a video from Final Cut Pro 7 to a Quicktime .mov file.  The file plays fine on a mac, but when I try to play it on a pc it drops frames throughout the video.  I have other .mov files on this pc also exported from fcp7 that play just fine.

  • JPA multiple queries run for ManyToOne mapping

    I have a ManyToOne relationship defined on an Entity A to another Entity B. When I run a named query that returns N results, N queries are run to populate the Entity B objects defined by the ManyToOne relationship. Is there a way to configure toplink

  • Transfer order & work order in HUs.

    Hi Experts, Can anybody please explain me, What is mean by Transfer order & work order in HUs.

  • Safari doesn't play some quicktime movie/animation

    Hi there .. I have a problem with Safari: It doesn't play some on screen little quicktime windows used for advertising or .. showing little animation. Like www.luxology.com (they have a little quicktime playing) But if I put the mouse over such littl

  • Export groups of pages (or spreads) to individual .indd

    Good morning, This is my first post and I'm relatively new to InDesign (as I'm sure you'll be able to tell).  I've found this forum in particular to be incredibly helpful so far - so thank you in advance for helping me learn! Here's my scenario:  I'm