My iphone screen has gone completely blank cant use it for anything as i cant see anything on screen, but sound, siri and everything else does work. my screen is just completely blank.

i have heard a few people talking about a hard reboot, which you need the power botton and home botton for but i broke my power botton awhile ago.

Hold both home and sleep buttons together until apple log appears and then welt go and wait for phone to restart

Similar Messages

  • The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    Just re-set the App -
    Open the App
    Hold down the power button until the slider appears
    Hold down the home button (Don't use the slider) Until the App Closes
    You might lose your place, but shouldnt be too hard to find it again...

  • IPhone 3GS has gone completely dead, after telling me to connect to iTunes, after trying to update the software.

    My parents are about to recieve an upgrade to their contract which currently is an iPhone. They asked me to sync their iPhone to iTunes to save the settings, should they get an iPhone again.
    When I tried to sync the phone, iTunes prompted a software update (this doesn't suprise me as they wouldn't see the need to connect it to the computer ever!)
    Naturally, I accepted this update, only for an error to occr. (I didn't see this, my Dad said it happened but didn't note the error code down.)
    Then, when I went to use the phone, it said on the screen, "connect to iTunes". On doing this, neither iTunes or the phone had no response. I set the iPhone into recovery mode to restore it from iTunes, and the phone flashed white for half a second and then cut out. I've had no response from it since, tried charging and leaving it plugged into the computer.
    Any ideas?
    Thanks

    Oddly, I've now fiddled with it a bit more, and I can manage to get the Apple logo up for a short time, but if I let go of the hold button it cuts out again.
    If I continue to hold it, the logo turns into connect to iTunes. I do this, no response from iTunes.

  • IPhone screen went black and won't turn back on and everything else is working besides that.....HELP!!!!

    The description says it all.....my lock button on the top is broken (iPhone 4).....not sure what to do.....any ideas?

    Take it in for repair.
    Genius reservation http://www.apple.com/retail/geniusbar/

  • My iPod touch screen doesn't shut off. The auto lock is set for two mintues, and everything else is working fine. I've noticed it only fails to shut off when in the music screen. How do I get the screen to shut off without using the lock button?

    Please help. This is really annoying and it runs my battery down. My auto lock is set to two minutes. I've checked several times. Thanks.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    have you tried charging the device ?
    if so and it still does not work you can try a Forced Recovery..
    by holding the HOME button down and plugging it into your computer at the same time..
    http://support.apple.com/kb/HT1808

  • My screen on my iPhone has gone completely blank. I can hear it ringing but am not able to answer it. Any advice?

    My screen on my iPhone has gone completely blank. I can hear it ringing but am not able to answer it. Any advice?

    try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • 17" intel iMac screen froze then has gone completely blank. Any ideas?

    Hi There,
    My 17" intel iMac screen froze then has gone completely blank.. 
    I've done a SMC reset to no avail.
    thanks
    Richard

    If it won't startup in Safe Mode, then try Startup Manager or the Apple Hardware Test from your original Install Disc.

  • My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?

    My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?

    Try Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My iPad 3 screen has gone completely black and does not respond

    MY iPad 3 screen has gone completely blank (blacked out) and does not respond to either of the power buttons.
    ANy suggestions?

    If the battery is not flat, try a reset.
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • My touch screen on my ipod Nano, Generation 6 has gone completely white. I can still play music if I "accidently" touch the right icon. Does anyone know how I can fix this. Also I have 2 other ipods that i can't sync anymore, it says they are not compatib

    My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
    Thanks

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iphone 4's screen has gone black, like it would if i had turned it off except i have not turned it off and it wont turn back on either. can anyone help?

    my iphone 4's screen has gone black, like it would if i had turned it off except i have'nt turned it off and i cant turn it on or anything. can anyone help?

    Try a reset. Hold down the Sleep/Wake button + Home button for around 10 seconds until the Apple logo appears.
    Let me know if this helps.
    - Greg

  • HT1349 The screen to my ipod touch has gone completely white.  I cannot power it down or do anything at all.

    The screen to my ipod touch has gone completely white and I cannot power it down, or do anything.  I have it plugged into a power source right now

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

  • My iphone 4s has gone black and frozen

    my iphone 4s has gone black and frozen

    Hi WINDSOR154!
    Here is an article that will help you troubleshoot this issue with your iPhone:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My iphone 5 has gone crazy...

    Well, i bought my iphone about 3 months ago and i activated it about 1 and a half month ago, because i bought it in the usa and the activated it in another country, anyways since the first day i activated my iphone it has gone crazy ican't unlock it when i have to slide it at the beginning sometimes it opens apps alone, it types alone sometimes my iphone is completly good but then it goes crazy. Then i was going crazy with my iphone so i dicided to reset it, after i did such thing the iphone was still crazy, Then an update (IOS 6.01) came and i thought that the update will save my iphone by fixing this problem but it was exactly the same. please help me because my country doesn't provides an apple store where i can have apple support.
    here is a video that i found that had kind of the same problem as my iphone: http://www.youtube.com/watch?v=pgnkWjGvkYo
         HELP HELP HELP PLEASE I REALLY NEED MY IPHONE.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If basic troubleshooting does not resolve, take the device to Apple for evaluation and possible replacement.
    Be aware that the iPhone warranty is NOT International.  You will need to either return to the US with the device and take it to Apple or ship it to someone you know in the US to take it to Apple.

Maybe you are looking for

  • Bug report, toplink lacks checking for required attributes

    given the following code, I get an ORA-00911: invalid character error code . Instead you should expect to be getting an error from toplink saying missing argument... final String sql = "select....where line.Da_Object_Id =#id "; final DataReadQuery da

  • How to use remote JMS in websphere5?

    I want to use JMS in another server to send message so that I config required jndi in server. When I lookup local JMS jndi(connection factory, queue) it works correctly. But when I lookup remote connectionfactory, it throws 'javax.naming.Communicatio

  • Powerpoint text slides unreadable

    Hello, I am inserting Powerpoint(2007) slides into a video of a presentation. These slides have a lot of text on them, and when I put them into Premiere, they become virtually unreadable. The only effect I am adding is .5 anti-flicker, which blurs th

  • Do You Need QT To View YouTube HD Videos??

    When viewing a regular youtube video, the file plays as a flash (.flv) native to the browser. Meaning, you do NOT need QuickTime, or any QT codec to view it. Youtube HD functions differently, that file is a QT (.mp4). My Question is .... when viewing

  • How do I reinstall After Effects?

    I recently had a trial version of after effects and have since deleted it. I just purchased Creative Cloud and I do not have the option to download the program. I am only given the option to update. When I do that, the update fails due to the fact th