MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!

Hello, my iPhone screen has turned sepia. No one say 'click the home button 3 times' or 'turn white on black off' because I have tried them!
Basically on the right side of the screen there is a black part. About a quarter of the screen it fills.
It is sepia too. It is really hard to see things. Also, say if i am on the home screen, then i open settings; the home screen would be in the background!!
HELP!
Here is a picture

For an out-of-warranty replacement phone:
149.00 USD
=
94.6872 GBP

Similar Messages

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

My Iphone 5 home button keeps pressing itself but stops if put pressure on the bottom of the screen on each side of the home button, i have noticed that there is a screw missing on the right side of the lightning port could this be the issue?

My Iphone 5 home button keeps pressing itself but stops if put pressure on the bottom of the screen on each side of the home button, i have noticed that there is a screw missing on the right side of the lightning port could this be the issue??

If you are still under warranty, contact Apple to get it serviced. You can also visit an Apple Store or Authorized Apple Service Provider to get it looked at.
iPhone - Contact Support - Apple Support

My main page in gone to the right side of the screen???

Every time firex open and I try to search for information all the page is gone to the right side of the screen dificulting to go up and down the page as the arrows are gone on the right side of the screen and viewing the full page. What to do?

Disable or uninstall that extension.
https://support.mozilla.com/en-US/kb/Uninstalling%20add-ons#w_how-to-uninstall-extensions-and-themes

My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?

My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

My iPad has a series of thin black lines running across the right side of the screen. They look like pages in a book.

How does one get rid of the thin black lines running across the right side of the screen? They look like the edges of pages..... This is an iPad3 and the lines have been there since I took the iPad out of the box.

Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is suggested...
Be sure to make an appointment first...

2011 27" iMac is dim on the RIGHT side of the screen

Just like the countless other people with the 2009 and 2011 27" iMacs, it seems the backlight is not functional on the right half of my screen. All of the other posts I've searched for seem to point to the left side being the primary issue, mine is the right, in the same spectacular manner. Wondering if anyone else has experienced this on the right side? I attempted to apply pressure at the bottom LEFT of the screen and all over the border of the LCD to no avail.
I contacted apple support, they suggested I have it checked for the recall video issue with the apple store(certain video cards). My i7 passed the tests for the video card, and i was quoted $510 to replace the screen.
The technician couldn't verify that the replacement LCD had been re-worked to avoid this issue in the future. The technician was aware of the issue and indicated she's done 10+ of these repairs, and knew it to be a common issue. She acknowledged this is a manufacturing defect, that the consumer could do nothing to avoid. She checked with her manager, the manager said that I was out of luck, that I had my chance to purchase applecare, so no break on the replacement cost/repair.
If anyone has had the issue with the right side of the screen, is there another connector which may need pressure applied to that might resolve without replacing a $500 screen?

Hi Dewey,
Are you trying to convert via Adobe Reader? If so, are you able to close and restart Reader (you may need to force quit, or use Task Manager to quit Reader if it's truly frozen)? After restarting, choose Help > Check for Updates to make sure that you have the most current version.
And, if updating Reader doesn't help (or you already have the most current version), please try converting that same file using the ExportPDF web interface at https://cloud.acrobat.com.
Please let us know how it goes.
Thanks!
Sara

HT1212 i dont think i backed up my photos to my pc.the right side of my screen is broken and i dont have my passcode while my phone is in recovery mode. my pc says to restore so i can get into itunes. if i didn't backup my photos will i lose them all??

i dont think i backed up my photos to my pc.the right side of my screen is broken and i dont have my passcode while my phone is in recovery mode. my pc says to restore so i can get into itunes. if i didn't backup my photos will i lose them all?? how do i back them up at this point???? please help

If your phone is in recovery mode, then they are already gone.

Black bar along the right side and the bottom of the screen- DV5-1007ca

I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!

I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.

Is there a way to make the menus appear on the right-side of the screen?

Hi, I'm wondering if it is possible to make all the menus on my iPod onto the right-side of the screen rather than the left?
I'm asking this possible I recently had my friend step on my iPod and the complete left half of the screen is gone but the right half still works fine. And since the menus are all on the left-side, I cannot view them and it is extremely hard to navigate the iPod. Everything else works fine on the iPod except the screen. Is there certain software or anyway possible to change the menus orientation? This would be very helpful to me... Any help at all is appreciated!
Thanks,
Richard

No, not possible to the best of my knowledge. You can get the screen replaced or do it yourself. There are a number of online places that sell parts and also perform iPod repairs. To have one of the online places do it for you and turn it around in a day, expect to pay around $90-$100. Parts can be had for about $60-$80 if you want to do it yourself. eBay may have LCD screens for less.
Patrick

In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How do I get rid of the annoying "exportPDF" bar on the right side of the screen that blocks much of the document?

How do I get rid of the annoying "exportPDF" bar on the right side of the screen that blocks much of the document?

Hi soreankles,
To hide the toolbar in Reader, choose View > Show/Hide > Toolbar Items > Hide Toolbars.
Best,
Sara

The right side of the screen of my MacBook Air a yellow line appears very thin and dotted. What can I do to eliminate it?

The right side of the screen of my MacBook Air a yellow line appears very thin and dotted. What can I do to eliminate it? Marco

Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, contact Apple.
Best.

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

My macbook keeps freezing with the left side of the screen on the right and the right side of the screen on the left. Help

My 17-inch early 2011 macbook pro keeps freezing on me. The freeze usually occurs when I'm importing or exporting pictures, when I stream anything, or If I am watching a dvd. The left side of the screen shifts to the right and the right side of the screen shifts to the left. lines also appear on my screen and I can not force quit any open application. I have not dropped my laptop at all.
Mac OSX Lion version 10.7.5
2.2 Ghz Intel Core i7
I would like to avoid going to the an apple store to fix this problem if possible. The closest one to me is 40 miles away.
Help : )

If you don't have the Applecare extended warranty then you will need to pay for the fix. The fix is a New Logic Board. It seems as your Graphics card is failing in some way. No there is no software fix for this.
The Graphic chip is soldered to the logic board and the only way to change/fix it is to replace the complete logic board.
Good Luck and Best Wishes

MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!

Similar Messages

Maybe you are looking for