My iphone screen has turned black

Help my screen has turned black and can't get anything up on my phone

See Here for  >  Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062

Similar Messages

  • My iphone screen has turned black, phone is still on as screen shots can be taken. When home button and power button are held - no apple icon will appear. Please help

    My iphone screen has turned black, phone is still on as screen shots can be taken. When home button and power button are held - no apple icon will appear. Please help??

    If this iPhone has had the screen replaced previously, possibly LCD Display connector has simply come loose from the Logic Board. Possibly the LCD Display is faulty and the front screen assembly needs to be replaced. If you have Warranty or AppleCare make Genius reservation or set up service and take or send to Apple. This is handled by Apple with Replacement iPhone 4S.

  • My screen has turned black as if the LCD screen isn't working. There is no damage and the phone is still responding to vibrations and there is a dial tone when called. What is wrong with my phone?

    My screen has turned black as if the LCD screen isn't working. I have tried using the lockbutton and home button to turn it on, but it doesn't work. What should I do?

    Your phone is probably broken.

  • Screen has turned black

    Can someone please help....Mah screen on mah ipod has turned black...it still works tho..I plugged it into mah computer and when the ipod turned on the screen was black instead of white..can someone pelase help

    Try a Reset, hold both Home and Power buttons until the iPhone begins to start, usually about 10 seconds of holding both buttons.
    Also you can try putting iPhone on Wall Charger and Reset again.
    If still nothing Restore.
    If still problem it will be covered by Warranty.

  • My iphone screen doesnt turn black when im on the phone

    my iphone 4 screen doesnt turn black when im on the phone and its not the case and i havent dropped it, is there anything i can do without having to get a new phone. i would get a new phone if i need to but i would like to fix it without having to.

    The Ambient Light Sensor may be malfunctioning. Unfortunately there is not much you can do without tampering with the phone internally and voiding the warranty. Your best bet is to bring the phone to a local Apple Store and have them inspect it.

  • My screen has turned black. HELP

    my screen turned black and i can not see anything. calls come through but i can not answer unless i assume where the sliding tab to answer it is on the screen . i turned it off and now i cant turn it back on because it needs my passcode lock which i can not put in because i can not use the screen....!!

    Try a Reset, hold both Home and Power buttons until the iPhone begins to start, usually about 10 seconds of holding both buttons.
    Also you can try putting iPhone on Wall Charger and Reset again.
    If still nothing Restore.
    If still problem it will be covered by Warranty.

  • My iTunes screen has turned black on my Mac.

    I am therefore unable to see what's selected.  Has anyone any ideas?  I've tried the universal access options but no luck.

    If you just upgraded to the new iTunes match it's a beta version still with plenty of bugs still left in the software.try restarting your computer and get back into iTunes and see what happens.if the problem persists then I would down grade the the last version of iTunes and that should take care of the problem.if you haven't upgraded there are a few worms and trojans viruses floating around in the Mac software recently and it could be and could be causing your problems.

  • MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!

    Hello, my iPhone screen has turned sepia. No one say 'click the home button 3 times' or 'turn white on black off' because I have tried them!
    Basically on the right side of the screen there is a black part. About a quarter of the screen it fills.
    It is sepia too. It is really hard to see things. Also, say if i am on the home screen, then i open settings; the home screen would be in the background!!
    HELP!
    Here is a picture

    For an out-of-warranty replacement phone:
    149.00 USD
    =
    94.6872 GBP

  • Background on google has turned black?

    The background on google/safari on my iphone 4 has turned black (the URL bar at the top of the screen and the navigation bar along the bottom). It's only on Google, the rest of the phone is fine. I've updated to iOS5.1, tried doing a factory restore, soft reset, pretty much everything but cannot change it back. I have also check to make sure that I haven't inadvertently toggled the phone to white on black. Any ideas?

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
    There's more to try but let's go a bit at a time.

  • My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

    my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

    christobell86 wrote:
    ... it will not restore my phone as i have got the app find my iphone switched on.
    You can access iCloud.com on a computer to turn it off.
    http://support.apple.com/kb/PH2702

  • My iphone 4's screen has gone black, like it would if i had turned it off except i have not turned it off and it wont turn back on either. can anyone help?

    my iphone 4's screen has gone black, like it would if i had turned it off except i have'nt turned it off and i cant turn it on or anything. can anyone help?

    Try a reset. Hold down the Sleep/Wake button + Home button for around 10 seconds until the Apple logo appears.
    Let me know if this helps.
    - Greg

  • HT1688 my Iphone 5 has a black screen and won't turn off/on. It locked on my yesterday while in photos and then it went black.

    my Iphone 5 has a black screen and won't turn off/on. It locked on my yesterday while in photos and then it went black.

    Hard Reset: HOld the home button and the sleep/wake button of your iPhone for about 10 to 15 seconds at the same time. Holding down both buttons at the same time  till you see the apple appear

  • We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years) and the screens has gone black and wont turn on.  Phone is charged. We have tried force quit- home screen and top button. help pls

    We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on.  Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer.  help pls

    FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.

  • My iphone 4s has a black screen. If I hold down the on button, it will occasionally flicker and then go black. How do I get it to turn on?

    My Iphone 4s has a black screen. If I hold down the ON button, it will occasionally flicker and then go black again.
    Is it dead? Is there any way to fix it? It's sitting in a bag of rice right now, a desperate measure.

    Are you saying it got water damage?  If not what mende1 suggested, or the following
    http://support.apple.com/kb/TS3281
    is the way to proceed.  If it got wet all bets are off. 

  • My iphone 4 has a black screen I can recieve calls but cant see anything it wont turn off what can I do?

    My Iphone 4 has a black screen it still works I just cant see who Is calling or texting how can I fix this ?

    You can actually fix this by posting this in the iPhone forum and NOT an iWeb forum which is for building websites.
    Check which forum you are posting in before doing so.

Maybe you are looking for

  • Multiple developers working on the same application/project

    Hi All, We have multiple developers working differnt components of the same application/project. As most of them are working on their local systems within their local projects which later has to be integrated as one application project I am afraid th

  • Deleting Data from Infocube before loading

    We are doing full loads by "Plan Version" into our CCA cube. We do these full loads each night. Eventually a "Plan Version" will stop changing and we can discontinue loading. My question is there a way we can delete data in the cube by "Plan Version"

  • MDM installation on AIX 5.3 core dumps

    Hi all, We installed MDM 5.5 SP4 on AIX 5.3 ML 5 (and the latest patches were applied last week-end). The MDM Server, Import and Syndication daemons are started. Database is Oracle 10.2 (corresponding Oracle client is used), installed on the same ser

  • Issue in Mapping Public Flex Fields

    Hi, Am trying to use flexfileds in BPM worklist so that I can have additional attributes from the payload associated from the humantask type , in the task header that appears in home page. Am able to create new label and then tried following steps :-

  • Data consistency

    Hi, I am new in Abap. Could anyone help me to solve the query. I have a requirement to modify 2 abap Z*  programs and 1 Z* table in DV.  But the sources do not exist in DV, only exist in PD.   Is it possible to modify in PD directly without the  tran