My iphone screen only show the apple logo only

when i updated my iphone, suddently my usb no work now stop already. then it only show on my monitoe is the apple logo only.
cannot restart, cannot do anything. Please help me solve the problem. i scared.

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to connect in recovery mode and restore again, explained in this article:
iOS: Unable to update or restore

Similar Messages

  • I can no longer see my iphone on my computer. the ipone is gone blank only showing the apple logo

    my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?

    Your iphone is shown at the top of the page.
    You can also simply click View>Show Sidebar and it will look about the same as it did before.

  • HT201406 while trying to update my ipod touch  something happened and now my screen only shows the apple logo and nothing else happens

    while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod touch wont switch on and constantly only shows the apple logo screen

    ipod touch wont switch on and constantly only shows the apple logo screen. Have tried to reset by holding both buttons down but hasnt worked. it also doesnt appear on itunes.

    Hvae you tried:
    - Reseting the iPod and then try restoreing the iPod
    - Placing the iPod in recovory mode and then restoring the iPOd.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • What do i do if my iphone only shows the apple logo?

    It only shows the apple logo noe and then. Help please

    Restore it.  This link will help:  If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HT4061 I was software updating of my iphone when the updating complete and start installing the wi fi connection suddenly disconnected and it couldn't be completed. Now my phone doesnot display anything its like empty. it only shows  the apple logo. help

    Hi all,
    i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..

    Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let  them go.
    if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore. 

  • Nano frozen. only shows the apple logo

    my nano seems to be frozen. it only shows the apple logo. ive tried to reset it a couple of times but its still the same. the apple logo still appears and its still frozen. sometimes if i wait a while the screen lights up but its still the apple logo that it displays. the only difference is that the backlight is on. please help me solve this!!!

    Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651

  • HT201412 my ipod touch does not turn on after steps 1-4.  It only shows the apple logo and then turns off

    my ipod touch does not turn on after steps 1-4.  It only shows the apple logo and turns off

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPhone 5s is showing the Apple Logo

    My iPhone 5s is showing the Apple Logo, then the screen goes blue, then black, then back to the logo.  I was updating to IOS 8.1.
    IVe tried turning it off, but nothing happens.

    Hi Janni8950,
    If you are having an issue with your iPhone looping through an Apple logo after updating, I would suggest that you troubleshoot using the steps in this article - 
    Apple logo with progress bar after updating or restoring iPhone, iPad, or iPod touch from backup - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Ipod only showing the apple logo and will not do anything else. 1st GEN

    my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it

    Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.

  • HT4623 What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    Read http://support.apple.com/kb/ht1808

  • My iPad air would not start.  Only show the apple logo then no reaction after that.

    My iPad air would not start.  Only show the apple logo then no reaction after that.  This is already the 2nd time.  Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem.  It happened less then 30 days and same problem again.  Can someone please send me the hard-reset step so I can try myself before I send back to the service center again?  thanks

    Here's the hard reset info:
    http://www.hard-reset.com/apple-ipad-hard-reset.html
    Post something about what happened with your visit.

  • Will only show the apple logo thats it I can do noithing else

    my ipod only shows the apple logo and willl not do anything else how do i fix it?

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • IPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but brings error in downloading s/w message.can anyone help please.Thanks

    iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks

    http://support.apple.com/kb/TS3694#error14
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • How to fix a frozen ipod touch, it only shows the apple logo?

    How do you fix  a frozen ipod touch, it only shows the apple logo?

    Hello,
    I have same broken iPod Touch 4G, I'm stuck on the Apple logo and only what I can do is just restart. If I connect iPod turns on but that's all. I checked a lot of tricks how to restart/reboot device and how to get DFU but I have only the logo. iTunes on my mac can't recognize the device.
    And in Apple retail store the guy told me: sorry it's dead. We can fix for about £200. After 1 month when my waranty is finished. Funny isn't it? I can't believe that my lovely iPod is dead after 13 months. Where is the "for quality you have to pay." Is it conspiracy if you don't buy extra waranty we will send you killing signal into your iDevice?
    Many thanks for help

Maybe you are looking for

  • Update/Modify not working

    hi, i have ztable mandt key field ztest1  key field ztest2  key field ztest2  non key field when i'm trying to modify any key field, MODIFY keyword is actually adding a new record in the Database. it is because the new combination of key fields is un

  • Crystal reports 2008 connection to universe

    Hi , I am trying to create Crystal Reports using universe as a data source. I am able to logon BOE, select universe and then select the objects that I need to build a query. As soon as I click OK button I am getting "Logon Failed". If i use SAP BW MD

  • Printer 8600 Pro: I want to retrieve a privously printed document. Is it possible.

    I lost a tracking # for a package.  The # appears on a previously printed document. Can I retrieve that document from a log?  If so how?

  • When create a new asset card,click the Deact,how to react it?

    Hello all, A customer of mine ,when he create a new asset card, in the Deprec.Areas, he click the Deact, and the Deprec information for this asset  can't been seen. How can i react the Deprec. information? or i must create a new card? Who know,please

  • CSM for enabling hot spare instead of load balancing

    We have a server at a remote site that we want the remote clients to use. We only want them to use the central server if the remote one fails. Is there a way I can use "weight" or some other method to accomplish this. Thanks.