My iPhone screen turned black with blue stripes then went to the logo screen and then turned black. (iPhone 5) help!
My lock button has not been working for a few months. I dropped it a couple of days ago but it barely did it a while ago. I was texting when the screen developed blue/purple lines with a black background and then it went to the apple logo. So I thought it would just restart but then it turned black and won't respond to me trying to work it blindly (guessing where the icons are)... Should I just let it die and hope for the best? Any advice? Help.
Most likely a damaged LCD display. Probably will not fall under warranty . Apple can do an out of warranty repair for 199 on a 4S. You could look into insurance options as well through your carrier.
Similar Messages
-
I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1
I have exactly the same problem. iPhone 4S, never been jailbroken. Not behind a firewall and it happens whether I am on my home compute (iTunes) or directly thru Settings_Update.
Looks like loads of people are having the same problem - and as far as I can see, Apple's sole reply is jailbreak or behind firewall/ security settings/anti-virus. None of those apply here! -
I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.
It was the PRAM.
-
Ipod Touch has the logo sign and wont turn on
Hello,
My ipod touch is giving me problems. It had low battery today and suddenly just out of nowhere turned off. I plugged in for charging however it appears that the logo sign is only on and doesnt do anything else. Could anyone please tell me a solution for this. I have already tried holding the power button as well as the home for several seconds but nothing seems to work. Any help on this would be greatly appreciated. ThanksFirst, charge it up and try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
" fault code,,,,,waiting for activation, this may take some time,,,,," O2 gave my gf the contract and the new sim card to go into my old iphone 3g which was with O2 previous, O2 have assured us that the phone's imei number is not blocked, they have also said the sim is activated and there is no reason why the phone should not work. the phone is out of date warranty. the sim card does work in other handsets, also my sim from my iphone 3gs does not work in the iphone 3g. i have spent hours litterally on the phone to O2 and now to apple, but because i am out of warranty apple want £25 just to even listen to me over the phone. someone please help me. i am getting very frustrated for hopefully what might be an easy fix for someone. i have done all the resets that are possibly humainly possible, i have done all the resores you can do, have sync'd on many occasions all to come up with the same fault. i am still getting O2 in the top left corner but with no bars and when trying to call it fails imediately. wifi is fine, it works as an ipod.
ONLY AT&T can legally/legitimately unlock it. No one else at all.
-
My iphone 5 cant switch on after updating it. it only shows the logo on and then goes off and so
My phone can not switch on
Your data is already lost. You must restore your phone in order to be able to use it. This is why Apple offers you two ways to back up, including iCloud, which backs up automatically over wireless every night if you're plugged in to power and the screen is locked. How much easier could it be? Yet you say you haven't backed up in months. If your phone was lost or stolen, or you dropped it in a puddle, you would be in the same boat. PEOPLE: BACK UP YOUR STUFF!!!!
Signed, The Back Up Nag -
2.0.1 and the Logo screen problem
Does anyone who downloaded the update still have any issues with their phone getting stuck on the logo screen. This seems to be a large problem, and I am curious if this update fixes this issue.
I have not gotten the permanent logo screen since 2.01 (and had it and restored 5 times with 2.0), but now my wifi is permanently grayed out (even after resetting network settings in general settings and restoring yet again). So, while the phone thankfully works, it's of considerably less use to me without wifi (esp. since I have original iPhone).
-
My iPhone's screen is black with a white search circle in the middle of it. I can't get it to turn on or off. What should I do?
Try doing a hard reset - by holding the 'Power' button on the top and the 'Home' button simultaneously!
-
Iphone screen gone black with green stripes
Hi, mye iphone screen have gone black. I try to reset it, without luc. The screen is black with green stripes. Siri i available.
try this apple restore knowledge base
http://docs.info.apple.com/article.html?artnum=307219-en -
I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.
Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario -
Qosmio F30 starts with blue stripes during the start screen of Vista
My Qosmio F30-114 runs since years without Problems with Vista Ultimate.
Since some Days there is a huge Problem.
The Qosmio starts with blue stripes during the start screen of vista.
So I deleted the driver of the graphic card and used the standard vga card driver. the hardware assistent found a driver on the system.
For a short moment i was very lucky.
After a restart, there was a blue screen. after the next restard, again the standard vga card driver.
What can i do?
The download section of toshiba has no drivers for graphic card.
And really ... i wonder - how does it works all the years without problems...
Has anyone a solution?
thanx
toshibalover ;-)Hi!
First of all do you have this issue on an external monitor too or only on the internal monitor? Maybe its not a problem of the graphic card so check this with an external monitor.
I have checked the Toshiba website and there I can find some drivers for the Qosmio F30:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye -
My IPhone 3GS JailBroken turns on but shuts off then the black background comes up with white apple logo? And then turns on again? Does it over and over! HELP! Why Does This Happen And Is This Repairable?
Let Me Know! Cheers
Ryan Crawt
[email protected]Its against the forum TOS to talk about J/B phones. you will have to use google to resolve your issue.
-
I dropped my phone last night, already with a little glass missing at the top. The screen is black with blue vertical lines, I cant even see my home screen I've tried holding the home and power button. Someome help?
It's broken. Take it to Apple.
-
Today, my iPad2 wouldn't delete mail. Then the screen turned black. I turned the iPad2 off then on. Got black screen. Tried backing up to iTunes. Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065). Help, please.
Did you try restarting it by holding down the hold and lock button at the same time until you get the apple logo? If you already tried that then you should try putting it in DFU mode and doing a restore by following these instructions- http://www.iclarified.com/entry/index.php?enid=1034
-
After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?
Hello kumarsenthil210317
Check out the article below to start troubleshooting issues with touchscreen response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G.
Maybe you are looking for
-
i would like to print two pages per sheet (to save the universe) and Preview does not seem to have very good controls for this. does anyone know how to do this? I select "Print Selected Images", Select 2 "Images per page" - and then what? Clicking on
-
Dreamweaver Sync & GoDaddy Folder Structure
DW CS4 I purchased a Deluxe account to host two domains from GoDaddy for hosting and am running into the following issue: GoDaddy organizes multi-domain accounts on their server by specifiying a main domain (in this case http://coachinginroads.com)
-
Subtitle insists on being "over black"
I am attempting to add a subtitle to a movie clip in iMovie HD (6.0.3). The movie consists of just one short (5 sec) clip. I make an even shorter (4 sec) subtitle, "over black" is not selected, and preview looks great with text over video. When I att
-
MAX says visa32.dll not found in WINNT\system32 directory. File is there, have reinstalled and rebooted just to be sure. Same error. Why?
-
Hi, i am working on BI 7.0. i was having problem in creating proper transformation with routines so i followed following path. please let me know if i am correct since there was no error in loading still data validation is to be done STEPS: 1> creat