My iPhone shows black text instead of blue btwn iPhone users, Why?

My iPhone is shows black text instead of blue to different iphone users, what does this mean?? Thank you.

No matter what you send a normal text or iMessage the color of the "text" will remain black,but if you send a iMessage,the color of the message bubble will be blue and if you send a normal text message the color of the message bubble will be green.

Similar Messages

Why is my iphone showing up green instead of blue to other iphone users?

Why is my ipone showing up green instead of blue to other iphone users?

using imessage your text bubble should be grey to them i do believe.

HT3529 When i send a text while using imessage to another iphone user why does my email show up on their phone instead of my number ??????

When i send a text while using imessage to another iphone user why does my email show up on their phone instead of my number ?????? Can somebody please help me !

cfm007,
Welcome to our family. We want you to be able to enjoy all the services we provide and we definitely need to address this. Do you receive/make calls without problems? Are you able to receive messages with your contacts' number? Are you using iMessages? If so, go to Settings>Messages>Send&Receive>only your phone number should be enabled.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Replacement screen shows all Blacks are instead, Super-Blue's!

My original Dv7-3065dx screen went blank with the back-light still going. Every so often, it would work for a second, then go blank again. so i changed the cable and screen. The new screen worked, except now all the blacks, are super blue! So, of course i thought i got a bad screen, so got another one, but this time it seemed even worse! Upon turning it on, the windows symbol, even steaked blue across the screen, then same thing, all blacks, super blue!
I do want to mention, just in case, the fact that i purchased after market screen, from Amazon, for like $85, that had a converter cable on the back running from the left side connect to the right side connect, so i could connect on the right side.
Could these cables on the back of the aftermarket screens be causing this super blue problem?
I have check connections, to make sure it is pluged in like it should be.
External monitor works fine.
Also, i have already dissassembled the entire laptop, and cleaned the fan and re-thermo'ed the cpu! Runs alot cooler, screen works, but all the blacks, are still super blue, with occasional blank screen period.
What's next?
Anyone?

OK!!!!!!!!!!!! I got my 3rd screen in today, from the site you told me about. I got the one w/o the converter cable on the back of it. AND GUESS WHAT?????????????? IT FRICKIN WORKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
AMAZON SELLS CRAP FOR SCREENS!!!!!!!!!!!!!!!!
I almost kept the 2nd screen, because i thought there was no way it could be both screens, BUT IT FRICKIN WAS!
Sorry for all the caps and !!!!!!!!!!!!, but i am happy and pissed at the same time, because of the headache AMAZON caused me!
Anyway, i am hoping you also tried the one with the cable on the back, so if you did, your problem should be fixed with this also!
Let me know.

IWork '09's template chooser shows black text on a black background. Not very useful, how to change?

Hi -
For some time now, the template chooser that I see in any iWork application shows the name of the file as black text on a black background.
This can't be normal, right?
I'm looking for a way to change this into something with more contrast (black on grey/black on white, for example).
How?
I tried trashing preferences from my user account, the issue persisted.
I'm about to try under a new user and I'll report back.
Kind regards,
Edd Turner

Good that you try things out. If it doesn't help you might need to reinstall iWork and do the updates again.
Use Yvan's script to uninstall iWork fully.
          •          Go to http://www.box.com/s/00qnssoyeq2xvc22ra4k
          •          Choose public_YK > for_iWork'09 > other_iWork'09 items
          •          Click on uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button

Show blank texts instead of key or 'not assigned' in query-result

Hi,
is there a way / workaround to
1. suppress # / 'not assigned' in query results?
or
2. show blank texts (if maintained) instead of the key
(when showing texts for a characteristic in a query all characteristics with blank texts - none or ' ' -
will show the key instead of the blan text) ?
Thanks,
Christoph

Hi Christoph,
there have been several posts concerning this topic. As Saad told there is no direct way within SAP standard to reach this aim.
Depending on the Front-End Tools you are using these posts may help:
Not assigned and # in BEX 7.0 WAD
how to set field to blank if the data is # or unassigned
Brgds,
Marcel

How to show the text in a textBlock in my user control?

in my UC i have a textBlock . the text that i put through the xaml or the text that i put through the C# doesn't show:
<local1:Cell x:Class="UserControls.HintCell"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:local1="clr-namespace:UserControls"
mc:Ignorable="d" d:DesignHeight="130" d:DesignWidth="130" Loaded="UserControl_Loaded" >
<Grid x:Name="hintGrid" MouseLeave="hintGrid_MouseLeave">
<Grid x:Name="topTriangle" x:FieldModifier="public">
<Polygon Name="triangle_top" Points="0,0 130,0, 130,130" Stroke="Black" Fill="Red" MouseEnter="triangle_MouseEnter" MouseLeave="triangle_MouseLeave" />
<TextBlock Name="text_top" Margin="82,20,20,76" FontSize="25" Text="55" Foreground="Black" x:FieldModifier="public"/>
</Grid>
<Grid x:Name="bottomTriangle" x:FieldModifier="public">
<Polygon Name="triangle_bottom" Points="0,0 130,130, 0,130" Stroke="Black" Fill="Red" MouseEnter="triangle_MouseEnter" MouseLeave="triangle_MouseLeave"/>
<TextBlock Name="text_bottom" Margin="15,80,77,16" FontSize="25" Text="88" x:FieldModifier="public" />
</Grid>
</Grid>
</local1:Cell>
and the designer:
but, when debugging the text doesn't show:
i was told maybe to define the user control or the text as a dependency property, i don't know how to do it and maybe someone has a better solution?
thanks.

thanks. but i didn't really understand, maybe you can give an example with my parameters?
The text dependency property is called LabelFor.
It's this bit.
public string LabelFor
get { return (string)GetValue(LabelForProperty); }
set { SetValue(LabelForProperty, value); }
public static readonly DependencyProperty LabelForProperty = DependencyProperty.RegisterAttached(
"LabelFor",
typeof(string),
typeof(EditRow));
You would substitute the name of your usercontrol for EditRow when you cut and paste that into it.
There is a style which defines what EditRow looks like by giving it a template.
<Style TargetType="{x:Type local:EditRow}">
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type local:EditRow}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="{Binding RelativeSource={
RelativeSource FindAncestor,
AncestorType=local:EditRow},
Path=LabelWidth, TargetNullValue=2*}"/>
<ColumnDefinition Width="{Binding RelativeSource={
RelativeSource FindAncestor,
AncestorType=local:EditRow},
Path=PropertyWidth, TargetNullValue=3*}"/>
</Grid.ColumnDefinitions>
<TextBlock Text="{Binding RelativeSource={
RelativeSource FindAncestor,
AncestorType=local:EditRow},
Path=LabelFor}"
HorizontalAlignment="Right"
Margin="0,4,0,0"/>
<Border Margin="6,2,6,2" Padding="0,2,0,2" Grid.Column="1" >
<ContentPresenter HorizontalAlignment="Stretch"/>
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
That uses binding to give the textblock text property the value of LabelFor.
You could instead put your markup directly in your usercontrol and bind it like that.
This bit would then pretty much cut and paste in
<TextBlock Text="{Binding RelativeSource={
RelativeSource FindAncestor,
AncestorType=local:EditRow},
Path=LabelFor}"
You would need two of course if you have two textblocks.
ps
People have suggested dependency property to you because this is how properties on wpf controls work.
If you instead chose to use properties then you lose the ability to set value by style, animation, binding etc Your usercontrol will not behave like a wpf control. This might not really concern you if you're just working on your own on an app.
It would if you were working in a team though.
Personally, I would reject code which exposed regular properties from a usercontrol at walk through.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

In Safari, the top of of the screen is no longer white; it's a dark gray, and everything is in shades of gray. The line that shows a page is loading is now white instead of blue. Any ideas why it's so dark and in black/white?

All of a sudden, in Safari, the top of the page is no longer white; instead it's a dark gray, and the bar where you type in a web address is a slightly lighter shade of gray. The rest of the page is in color like always. Also, the line that shows a page is loading is white against the gray background, isntead of the usual blue. Any thoughts?

Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Hierarchy node text shows short text instead of medium text in WebI report

Hi,
We have created a simple Hierarchy suing Tx RSH1.
US -> North Carolina
South Carolinakey
Rest of America
Please note "North Carolina" is the medium text for the node while the short text which can contain max of 10 chars is "North Caro"
We have used and activated the hierarchy within the BEx query. Text display with "Medium Text" has been enabled for the InfoObject. The display on the BW report is as expected showing the medium text for all levels and all modes.
When a universe is built on the query and a WebI report is created based on the universe everything works fine other than than the Hierarchy text for different levels and nodes. Instead of showing the Medium text, the short text is getting display.
We took out the text object from the Universe in the Universe designer and went ahead with the key and medium text, but that did not help.
Is this a known bug? Is there a workaround for this issue?
We are on XI 3.1 SP3.
Rgds

Hi,
I am working on BO XI 3.1 SP2.
I have displayed the medium text for the hierarchy nodes as:
In my universe three detail objects(key, medium name and long name) gets generated for each hierarchy node.
I have copied the definition of L01 Medium name (detail object) in the L01 dimension object. similarly for other hierarchy nodes.
i.e. L02, L03.. etc.
Now the master data which have been loaded for the medium name will be displayed.
Regards,
Rohit

E mail attachments showing entire text instead of just an icon

can some tell me where to find the settings to keep the attachments in an email as just the icon not the entire text showing in the body
example - when I attach a PDF article to an email the entire text shows in the body instead of just the icon - HELP
THANKS

Hello, and welcome to the Discussions.
This cannot be changed, except to temporarily View as Icon while composing, and that will have no impact on how the recipient sees the attachment (which is a true attachment even though View in Place is used). To learn how Mail treats single page PDF vs multi-page PDF, read:
http://docs.info.apple.com/article.html?artnum=25538
Ernie

Website uses foxpro to produce report with barcode and barcode shows as text instead of barcode

view source code shows the code below
<pre><nowiki>
<td>*16001533779*
</nowiki></pre>
what must I do to have barcode show as barcode and not text?

You would need to have a font installed to show this barcode if there aren't images used.
face="Free 3 of 9 Extended" specifies that the "Free 3 of 9 Extended" should be used.
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Firefox 11 beta is having issues loading Flash and HTML content, shows plain text instead of images

I'm not sure what is causing the problem but it has been happening since beta 10 and now its also in beta 11. Randomly when I load any web page the page is displayed in plain text leaving all the HTML or flash content blank. Yes I have the most recent version of flash installed along with Java just in case it was looking for that mess as well. Sometimes the pages load fine, and sometimes they don't, it's like playing lotto with the internet. The only fix I know of is to either keep refreshing the page and "hope" it catches it on the reload, or closing Firefox and running CCleaner. Some times FF will load some of the visual data and leave gaps but usually its just basic text mode. I'm at a loss as to whether the problem is from Firefox or my ISP being a douche, either way its annoying that Firefox is not showing internet pages like it used to.
Hate to see it happening but it looks like Firefox is on its way to being just another Internet Explorer clone (failure). Should have stayed with your original team, all the new folks you have hired are really mucking up the whole project and its goal of a free and open internet. Not to mention writing bad code and costing you money and more importantly the user base.
(Update, now it's not doing it go figure, but I'm sure it will do it again at some point, perhaps its not Firefox and something else, I'll keep my eye on it and try to report any findings)

If you use extensions (Tools > Add-ons > Extension) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to show the text, instead of number

Hi Buddies;
I'm creating a form, using oracle forms 10g. In this form I'm showing the equipment information. We sell services, and for some services, we provide the equipment, but we have a lot of a equipment, so we need to keep an inventory of these equipment. So for each equipment we have several status, example; Available, Returned ok, Assigned, Stolen, Returned by Damage .
These status resides in other table, but in the where I'm getting the info to show thru the screen, just have a code.
What I want, is to change this code, for the description of that code, example, 01 = Available. So, if the record for status has code 01, instead of 01, I want to show the word Avalaible.
Can somebody explain me, how to do this.
Thanks
ANG

oooppss i missed one this there is you code mistake also...
Begin
     Select status_name into :EQP.status_code -- Here use description field name not the same code field
     from eqp_status
     where status_code = :EQP.status_code ;
End;Also increase the size of datatype of description item so it can hold description.
I like to use LIST ITEM in these type of cases ;) Its easy and not required any POST-QUERY and POST-CHANGE code. As craig said you will have to keep on POST-QUERY and any performance issue etc.
So, i would prefer to use this method...
1. For that code field set the item type property to LIST ITEM.
2. Create one record group of your this query like...
Select status_code, status_name
from eqp_status3. Populate that record group into that list item. like
Trigger = WHEN-NEW-FORM-INSTANCE form-level
DECLARE
vGrp NUMBER;
BEGIN
vGrp:=POPULATE_GROUP('GROUP_NAME');
POPULATE_LIST('LIST_ITEM_NAME','GROUP_NAME');
END;Now at the time of query it will automatically show you saved status.
-Ammad
Edited by: Ammad Ahmed on Apr 29, 2010 10:02 PM

Edit shows black screen instead of photo

With a couple of my photos, when I double-click to edit I get a black screen with the edit bar below grayed out. They're JPEGs from my digital camera, the same as most of my other photos. I've been using iPhoto since version 5 without encountering this problem before. Any suggestions?

Well I never said it was another internet forum, I said it was an internet forum - this one. Search you and you will see some folks fixed this issue with the 8.0.2 update.
To do a Rebuild:
Start with Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, faces or places for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
If that doesn’t work: A Manual Rebuild
To create and populate a new library:
Note this will give you a working library with the same pictures as before, however, you will lose your albums, keywords, modified versions, faces, places and books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Certain web sites suddeenly look like text instead of all the usual graphics, why has this suddenly happened

Several newspaper websites now download without the usual graphics and just text and also without some pictures, other sites are ok, and all sites are fine in Explorer. I have downloaded an update to Firefox but this has not solved the problem. I didn't make any changes that caused this problem. Note I tried to update my graphics driver but the last version I could find was 10.2 not 10.6 - see troubleshooting info.

Did you install some readability extension such as "Readability" or "Evernote Clearly" the point of them to remove unimportant columns to the left and right on blogs and just have the essential in a simpler format that is larger and easier to read -- most pictures would be removed along with advertising.
I didn't realize that I'd be able to see your extensions, and I don't see anything that looks like that among yours. The closest is the Browser Highlighter but that is disabled. You do have Skype which is listed as a [http://example.com problematic extension] and is reported to mess up rich text formatting and drop pictures.

My iPhone shows black text instead of blue btwn iPhone users, Why?

Similar Messages

Maybe you are looking for