My iphone still thinks my headphones are connected

i have tried reseting and it does not work. how do i fix it?

See this Discussion
https://discussions.apple.com/message/15773088#15773088
And...
The Basic Troubleshooting Steps are:
Restart..  Reset..  Restore from Backup..  Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to your Local Apple Store is the Next Step...

Similar Messages

  • My iphone 4 still thinks my headphones are connected

    my iphone 4 still thinks my headphones are still connected, ive tried blowing it out and sucking on the jack nand taking it out and putting it back in many time and it still wont work, any ideas?

    Have you tried shutting down the phone completely? Restarting it may clear some software setting to allow the headphone jack to realize there's nothing attached.

  • HT5858 iPhone thinks headphones are connected

    My iphone 4S with iOS 7.0.2 won't put any sound to the speakers because it thinks there are a headphones connected.  I have some bluetooth headphones, but I have bluetooth disabled.  Any ideas?

    Hi jeberhardt,
    Thanks for visiting Apple Support Communities.
    I recommend trying these steps if the iPhone incorrectly registers that headphones are plugged in:
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    These steps come from the related troubleshooting article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best Regards,
    Jeremy

  • I have an iPhone 5 and when I go to raise or lower my volume it says that my headphones are connected and they are not what should I do?

    I have an iPhone 5 and when I go to raise or lower my volume it says my headphones are connected and they are not how do I fix this?

    more here
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    and here
    https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8

  • IPhone still thinks headset is connected.

    Help! My iPhone still thinks the headset is plugged in! I've tried re-ronnecting the headset and dis-connecting again, and have tried cold and warm reboots to no avail.
    Many thanks in advance if you can cure this one for me.

    Mark Drinkard wrote:
    What I am trying to find out is will the new Apple headsets work with original iPhone. The Apple site >lists the compatibility as 3G iphone.
    The new iPhone Stereo Headset is very similar and will work with the original iPhone.
    http://store.apple.com/us/product/MA814LL/A?fnode=home/shopiphone/iphoneaccessories/headsets&mco=MTI5Nzk0OQ
    Jason

  • My IPod Touch Stucks when the headphones are connected

    Hi,
    My Ipod Touch 2G (2.2) stucks after few minutes when the headphones are connected (genuines APPLE or genuines for Iphone + Mic).
    When I listen the music, after few minutes the song stops and the apple appears on the screen.
    Do you have an idea of what's wrong ?
    Best regards

    I think I fix the problem.
    It wasn't besause of the headphones but the two small magnets there was on the cover of the leather case.
    I removed them and the Ipod seems to work fine now ... I test again ...
    Any other victims ?????

  • I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    Try this:
    Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
    If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
    If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

  • My I phone thinks the headphones are plugged in and they are not.

    help my I phnes think the headphones are plugged in and they are not

    Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.

  • When i play music on my ipad mini no sound comes out and when i use the volume button it says headphones like headphones are connected and they are not.

    when i play music on my mini no sound comes out, so i push the volume button thinking it was turned down and it keeps saying headphones like headphones are connected and they are not even plugged in>

    Hi Try  a, reboot, press & hold power button & menu, button, hold both down until you see Apple  Logo. Before  you do Reboot, Sign out, of itunes on ipad then sign, back in this may help. Cheers Brian

  • Why does my Ipad say headphones are connected when they are not?

    I do not have sound on my iPad1. When I try to turn up the volum it indicates headphones are connected, but they are not. When I do use headphones they do work. I have rebooted the iPad, reset and restored the iPad and the issue still exists. Is this a straight hardware problem?

    iPad has a mechanical switch inside the jack so it knows when the headphones are plugged in.
    It may be stuck.
    Inspect it to see if something is in there, such as toe jam.
    Blow the port out with compressed air.
    Try inserting and removing a headphone plug several times.

  • I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?

    I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?

    Since you give no clue as to what make/model/version WiFi router you are using or how you have it configured it's hard to comment.
    Look here for some WiFi troubleshooting advice http://www.apple.com/support/ipad/wifi/.

  • My iPhone seemes to think that the headphones are connected egen they are not. So to talk to someone I have to put it On speaker or put in some headphones. I can't hear music and there is no sound egen i Get an sms or og I try to change the sound for sms!

    Why does it Think so and is there something I can do to fix it or do I have to send it in for fixing.?? tried to reset it..

    The same thing happened to me on my old iPhone 3G. My guess was that water entered the headphone jack, and somehow made some short inside it making the iPhone believe that the headphone was plugged in. Pluggin and unpluggin the headset many times proved that sometimes it worked ok for a while, so what I did to solve the problem was spraying some good quality contact cleaner inside the jack, and voilá,  still works fine after one year of the problem. Make sure you use a good quality contact cleaner WITHOUT LUBE, ( WD40 IS NOT GOOD FOR THIS PURPOSE) otherwise the lube will remain in the inside of your screen without a chance of cleaning it unless you dissasemble the iphone. A good quality contact cleanner should displace water and grease,and leave no residue after it evaporates ( IPA Iso Prophyl Alcohol, Hexane, or Heptane based products are ok)
    The other possibility is taking it to the repair shop, and have it looked by an expert. Good luck!

  • Itouch thinks headphones are connected when they aren't

    My itouch (2nd gen)connects well to headphones, but when I remove the headphones it thinks they are still connected. I've tried restarting, resetting, and restoring already. The volume control buttons work, but come up saying there are headphones in when there aren't. The headphone jack is clean too. Anyone have any ideas???

    I have the same problem. Have tried inserting removing headphones multiple times, looking for debris, the water damage indicator is still white, reboot, restore, etc. Still the iPod thinks that the headphones are always attached when they are not.
    This is very frustrating, as it seems many are having this same issue. My iPod Touch is just a little over a year old, and I have taken care of it. It's disappointing that the answer seems to be bad hardware on Apples part.

  • My phone thinks the headphones are plugged in and I can't get any sounds.  How to fix?

    My iphone 5 thinks that the headphones are plugged in and they are not.  I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones.  Any ideas on how to fix?

    I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.

  • TS1630 My iPhone 4 says the headphones are in when they are not. I am not getting any sound from the speaker. Nothing appears to be in the headphone jack.  Any ideas anyone?

    My iPhone 4S  has no sound through the speaker generally, although the speakerphone does work.  It is indicating that headphones are in, when they are not.  Nothing appears to be in the headphone jack.  Resetting the phone has not resolved the problem.  any ideas what could be wrong?

    This just happened to my brand new iPhone5. I tried turning all the way off and then on AND plugging and unplugging. Only to discover that simply connecting to the charger worked!!!
    Very frustrating though!!

Maybe you are looking for

  • Memory expansion on BestBuy

    Guys: i need to expand a client's white macbook (Apple MacBook 2.16GHz Intel Core 2 Duo (13-inch White) MB062LL/A Laptop/Notebook) and i've recommended Crucial to do this but they ask for a lot of papers and stuff before buying and i had it with them

  • How To Permanently Change ID3 Tags With iTunes

    Okay, so here's the deal. I've seen this question in several places, but I can't find a working answer, so I decided to give it a shot. My goal: change ID3 tag info with my song collection in iTunes so that my changes stick permanently. Now let me ex

  • I just upgraded to ios5 and all my contacts disappeared from my phone.  How to get back ?

    I just upgraded to ios5 and all my contacts disappeared from my phone.  How to get back ?

  • Adding Spatial to Existing Database

    I am looking for information detailing how to use/implement the Spatial search to an existing database. Most of the information I have already read does not indicate how to set up pre-existing tables. We are using another company's database design wi

  • Express document was terminated

    Hi all, i'm facing a big problem when i update any material document in t-code MB02 for challn then after updation a msg is created that Exprss document update was terminated by user'xxx'. and that terminate the update. for solving that firstlly i se