My iphone text tone is not working when I plug in the earphone.

Hi,
My iphone text tone is not working when I plug in the earphone.
My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
Anyone pls help.. the problem still there even I updated..

goh steven wrote:
hi wjosten
I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
The iPhone is working exactly as it is designed.
Your options are:
1) Unplug the headset.
2) Leave the headset plugged in and the earpiece in your ear at all times.
3) Turn on vibrate and put the phone in your pocket.
4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
This is a user to user forum, these are the only solutions we can offer you here.

Similar Messages

  • The radio will not work when I plug in the earphones?

    Screen shows "no radio signal" after earphones are plugged in?

    Thanks very much. I have another issue now. When I try to synch it I get a message that says my Ipod cannot be syncd because a required file cannot be found ??

  • Why does my printer not work when i plug in the internet? (ethernet)

    hey guys,
    i have the Mac connected to a large digital printer via the ethernet connection. works fine, no problems untill i plug in the internet. I get an error message in my software and can't print any jobs, but the internet works fine.
    I have a feeling that its a network problem, but don't want to mess around too much with the settings.
    This is a company internet connection.
    if anyone could advise of the possible network settings, I would be very greatful.
    thanks again.

    Your Mac sends traffic to the interface at the top of the list in
    System Preferences > Network
    When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
    The solution is to cable that Printer to your Router, not to your Mac.
    Alternatively, you could add a small Switch and connect your Mac and the printer to it.
    If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

  • IPhone message tone does not work when app is open

    I no longer get a tone or vibration notification when receiving a text message if the Messages app is open, even after the phone has been put to sleep.
    So, this is what happens: I write a message in Messages and send it, and then press the power button to put the phone to sleep.  If a message comes in reply, the phone does not play an alert tone or vibrate.  But if, instead of pressing the power button, I press the home button first and then the power button, the alert tone/vibration functions correctly.
    I don't have iMessages turned on.  My phone does have a password lock at the home screen.
    (The Mail application may have a similar problem, though I haven't been able to reproduce it on purpose, so it's possible I'm just missing the notification when it happens.)
    Encountered on both iPhone 4S (with iOS 6) and iPhone 5.

    I have Firefox 11.0 and still had to disable Skype Click to Call to get the copy options back in Excel.

  • Why does my hp deskjet 3050 not work when i plug in the usb?

    I have installed the 10.7 update as well and when i add the printer it says that the software is not yet available.

    Update to the latest drivers:
    http://support.apple.com/kb/DL907

  • My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    The problem would seem to be in the firewall in your router.  Have you tried disabling it? I assume you've updated the router firmware, right?  Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • TS2755 My text tone is not working, just vibration is working, please help me.

    My text tone is not working, it's just vibrating. Not on mute, and turned off the phone to reset.  What can I do?

    Follow basic troubleshooting found in your user Guide for your phone.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414

  • My iphone is not working when i plug off from charger.

    My iphone is not working when i plug off from charger. Evenmore when it is on the charger and it still not working, it asks to connect to i-tunes but i can't and i can see only emergency calls. What should i do?

    If it only works when connected to a charger, that would indicate a battery issue.
    As for the other issue... do as it suggests and connect to iTunes then restore.  There is no logical, intelligent expectation that anything on the device can be accessed as long as the "Connect to iTunes" screen is displaying.

  • Jack of the eyer phone is not working when i plug my eyer phones one is working other is not

    Hey sir ,
    My name is Bhushan Tiwari using Apple from 5 year and in my 5 Year of carrier an iphone problem has been arrived. my head phone jack is not working when i plug my eyer phones in my iphone so one works and other does not work please provide me the solution i will be very thankfull to you ...
    Thanking your ,
    BHUSHAN TIWARI

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

    I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.

    The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.
    Does anyone know what I can do?  I am unable to switch screens, and I can not see the track that is playing.  The only was I can switch between songs is to use the controls on my headphones.

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • My iphone 5 microphone is not working and i have tried the brush technique and still has not recovered ? what should i do

    My iPhone 5 microphone is not working and i have tried the brush technique and the microphone still has not recovered .. what should i do?

    your phone is still under warranty.  Bring it to Apple for evaluation.

  • I have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in?

    i have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in? Is it broken or do I need to download something to make it work?

    System Requirements
    MacBook Pro with Retina display
    MacBook Air computer
    Mac mini computer

  • Built-In Mic not working when Headphones plugged in?

    I'm currently using the 13 inch Macbook Pro with the latest software. I noticed just today that the built-in microphone that comes with the laptop will not work when I plug in my headphones. However, as soon as I remove them, they resume working.
    Does anyone have a solution to this?

    Use headphones that also have a microphone.

Maybe you are looking for

  • Song information appears different in itunes library

    generally go to FILE- ADD FOLDER TO LIBRAY , and import all songs from my hard drive into itunes , but the format of track names appear differently in the itunes track name area 1 - some of my track names are very long. When i copy into itunes librar

  • N8 Maps problem after hard reset

    There have been some cases where users have used the 3-fingered hard-reset method on their N8 devices and lost Ovi Maps in the process. If you find yourself in this situation, you can now resintall Maps via the software update feature in Ovi Suite. F

  • Kid deleted photos off photo stream on phone, can I recover them?

    My kid accidentally deleted photos off my photo stream on phone, thus all my devices, can they be recovered?

  • Drag-drop stack bar in JGraph

    Hi, I have a stack graph created out of the database values. My requirement is to drag the graph bar and reposition it (the updated values should be saved in the DB). Could any one please help me in doing this. Please advice me on any logic to make t

  • My MBP won't boot from my Expresscard SSD after I took it out during sleep!

    Before this happened I booted my Macbook Pro from an Expresscard SSD. Oddly enough you can take it out while the computer is sleeping. This time though I took it out and inserted it in another computer to transfer files. I put it back in and woke the