My Iphone Touch 4rd gen does not fit into Bose system

I got me a new Ipod touch 4rd gen. Now it doesn't fit into my Bose system? Also not in my daugters Sony?
Cable fits and it charges.

If the docks use the universal dock system then you need to purchase these:
http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc
Otherwise you can use a dock extender cable or use a knife and tape or similar to make the iPod fit.
Cable:
http://www.amazon.com/Connector-Extender-Extension-Cable-iPhone/dp/B004BJLXAM

Similar Messages

  • My iPod Touch 3rd Gen, Does not show up on iTunes Devises  4.3

    My iPod Touch, 3rd gen, does not show up on iTunes 10. I feel I have exhausted al avenues. Diagnotics passed all tests but - The Connection Not Found. Continued on with there Help suggestions with no success.

    Which version of iTunes are you using?
    Stedman

  • I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

  • My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    Which version of iTunes are you using?
    Stedman

  • I have a Sony Mini HiFi ((CMT-BX70DBI) and my 4th gen does not fit on the iPod dock. I assume I need a new adaptor but don't know which one??

    I have a Sony Mini HiFi (CMT- BX70DBI) and my 4th gen does not fit on the dock. I assume I need an adaptor, but which one?

    If the Sony uses the Universal Dock System you need this adopter.  If it does not they try Sony.
    http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc

  • My I Pod touch 4th gen does not display as connected when I enter i Tunes

    My I Pod touch 4th gen does not display as connected when I enter i Tunes, although my battery is being charged and my computer recognizes it, the problem persists. I have also tried the apple troubleshoot for this, but it hasn't worked.

    What Apple troubleshooting did you try?  This one?
    iOS: Device not recognized in iTunes for Windows
    B-rock

  • Window does not fit into page

    Hi all,
    I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM. 
    But its showing an error like 'Main window does not fit into Page'.  
    What could be the mistake?
    Can anyone help me in this..
    Regards,
    Shanthi

    Hi,
    U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
    if Your Space is small then data will be displayed in the next line.
    And display The data in Smallest  font possible.
    Regards
    sandipan

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

    While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
    Can someone help us in resolving this
    Thanks and regards
    RS

    Please expand the log also please check the SAP note 1835436
    Regards
    Aneesh

  • Table does not fit into window.

    Hi Guys,
    When I execute the Smartforms I get this message ? '
    "Table does not fit into window."   any guess why this message ?
    Regards

    >
    P R Raghu wrote:
    > "Table does not fit into window."   any guess why this message ?
    > Regards
    If TABLE does not fit WINDOW try to take it through the DOOR LOL
    Doesn't the error seems self explanatory to you?
    Regards
    Karthik D

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • Template does not fit into the window

    Hello all,
    <b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
    I am getting the above error in when i try to preview my smartform.
    The template is in footer window. I have only 3 lines in the template.
    And the size of template is less than window size.
    I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
    If you have any suggestions Please help.
    Thanks.

    Hi,
    Please check the following points:
    1. Font size and font family.
    2. Line spacing
    3. Allignment.
    4. Left and right margin
    Deserve Rewards.
    regards.

  • Getting "Table %TEMPLATE does not fit into window" error

    Hello,
    I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
    This only happens when I go to that printer.  I can print fine to a laser printer.
    I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
    I have adjusted the size of the window that my template cannot allegedly fit into but still no luck.  I have checked the height and width of the template and the window many, many times and still get the same error.
    Has anyone seen this before?  Please help.   Thanks.

    Hi James,
    You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
    What ever you create should be within this width and height .
    So accordingly adjust the width and height of your windows and components within them
    Regards,
    Dep

  • My iPod touch 5th gen does not respond properly when charging?

    Having real issues with my iPod touch 5th gen touchscreen not responding when it's on charge. Parts of the screen go dead or need several taps etc. Tried removing case etc. made sure I'm using included charger and directly to the mains not on an extension. Is it faulty?

    Some other users have reported same problem. I have not heard of a resolution. You can try:
    - Using another cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Datagrid Scrolling Problem.. Does not fit into Parent Container..

    Hi All,
           I have a module and module contains only one datagrid. I am adding this module to tab navigator dynamically in the next index. I am using Text as Item renderer in the datagrid and the row height will change depending upon the data diplyed on the Text. When the data populate in datagrid the datagrid going beyond the containers layout. i.e height is not fit into parent container. I am using Canvas as parent container .. Please find the below attached pictures and you will get to know what is my problem?
    Please help me to get out from this issue.. It is urgent..

    Thanks for quick reply
                   Here I am adding this module to canvas and the canvas is also dynamic . As you said "customize the measure() method in Text control and return the correct measuredHeight based on the explicitWidth."  what is the relation between Text control height and datagrid? Datagird should take it's parent container width and heights.  I am newbie to this Flex.. can you please explain it briefly. And if you have any Other way to do this please tell me .. it is very helpful to me.. Can you please post cusomized measure method if possible. please

Maybe you are looking for

  • Spry Menu Bar wraps to second line on a few monitors

    Hello- I am stuck on a spry horizontal menu bar and have discussed with a few local dreamweaver users and we can't figure this out. I'm using CS4 to create an internal site for my company (sorry, I can't send you link). I tested the site on firefox a

  • My iTunes opens and plays music but the store will not work

    I can't get my itunes store to work. The application for itunes will open but it won't show anything and says "iTunes could not connect to the iTunes store. Anm unknown error occorred (306) Make sure your network connection is avtive and try again."

  • OM-D E-M1

    When will Aperture support Olympus om-d e-m1 raw files?

  • Video on Top of Image

    Before I ask 'how' I'll ask if this is possible within Captivate (hopefully I can explain what I want to do). I would like to display a static image (e.g. a screen shot of one of our agent tools) and then, from the side, have a video file showing a p

  • FCP 10.1 - External Drives stopped connecting

    After a couple of days of using FCP 10.1 - suddenly when an external drive is connected - FCP doesn't recognize it. The OS registers the drive, so clicking on the "projects and events" folder on the external drive is the only way which projects show