My iphone turns green after a minute then turns off

my iphone turns green after a minute then turns off.
does anyone know what this is and how to fix it?

oh and also after i turn it off for like six hours it stops for 5 hours and then its back

Similar Messages

  • Red rendering line in timeline turns green after rendering but then reappears.

    I''m a new user of Premiere Elements 10 and relatively new to video editing.  My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3.  The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it.  The project is saved regularly after rendering and everything works normally.  No changes are made to any clips and as I stated the render line is green when the project is saved and closed.  Any ideas what I might be doing wrong.  Thanks in advance. 

    Thank you for that information. It kills about all of my theories.
    Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
    I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
    Wish that I had more to offer, but good luck,
    Hunt

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • Display turns "dark" after 1 minute

    Hi, first of all forgive my english
    I have a an unpleasent problem with my display, it turns dark after 1 minute of no using it. 
    I have a Satellite, Windows 8, and Toshiba Eco utility. I have tried to change the time when the display turns dark or when the computer shut down in a lot of opportunities in the "Power options" item, i even tried to make my own plan of energy, but nothing works :/ My display still turns dark after 1 minute.
    I really need to make it last longer on! D: it's driving crazy
    thank you, i really appreciate your help.

    Please join the following thread. When you do, give your complete model number.
       Display Being Turned Off Despite Win 8 power option Settings on P875 Laptop
    -Jerry

  • IPod LED turning green after only 2 hours of charging

    I noticed that the status indicator on my iPod Shuffle 2nd Gen turns green after only 2 hours of charging. According to the manual, it should only turn green when the battery is fully charged. Should I be worried that something is wrong with my battery? BTW, the shuffle was fully drained when I started charging. And I was using a USB Power Adaptor to charge. Thanks.

    I have copied the following from my Shuffle Manual "Charging the Battery,
    iPod shuffle has an internal, rechargeable battery. For best results, charge the battery fully the first time you use iPod shuffle. A depleted battery can be 80-percent charged in about _*two hours*_ and fully charged in about four
    hours."
    A little farther down it has a section titled "Status Lights" in the very first picture it shows and says
    "Turning on or disconnecting, green - Good charge(30% – 100%)"
    So it would be in the "Good Charge(green light)" range after 2 hours.
    Hope this helps

  • My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

    My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod touch 2nd generation keeps turning the volume up and then turns off, by itself randomly. Please help!!, My iPod touch 2nd generation keeps turning the volume up and then turns off, by itself randomly. Please help!!

    my iPod touch 2nd generation keeps turning the volume up and then turns off by itself randomly. Please help!

    Try the standard fixes in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    - Make an appointment at the Genius Bar of an Apple store.

  • Iphone 4s freezing at start up then shuts off and keeps restarting then repeating that process over and over. I have tried to reset the phone two different ways and still this problem occurs after I update it or turn off the phone.

    yes the title says most of what is going on.
    I recently reset my phone, losing all contacts and pictures. It was working fine, then after I updated it, it will not turn on completely.
    It starts up with the apple logo
    -goes to the ios 6 (please slide to open) screen
    -then shuts off
    -and repeats the process unless I shut the phone off manually
    I have tried to hold the lock and the home button down to manually reset the phone
    I have also tried reseting the phone completely previously, and I still have this problem.
    Any ideas?
    Thank you!!

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Airplay stops playing music from my iPhone 5 IOS7 after 5 minutes or so.

    I want to listen to my music on my tv using Apple TV (latest Apple TV with latest firmware) from my iPhone 5. But after 5 minutes it stops playing. What can be done about this?

    I have been scouring everywhere for a solution to a similar problem where the audio would drop out for a second or two ever 5 or so seconds - regardless of whether we were streaming content or using an iPad and Air Play.
    I tried changing the audio channels on the ATV as suggested elsewhere and here - no luck. 
    Played with the settings on the Air port Express - no luck.
    We swapped the ATV to a different tv and it worked fine.
    Then played with the audio settings on the SONY Bravia - no luck.
    Swapped the audio out on the ATV to play through the Air Port Express and plugged in the some headphones.  NO AUDIO DROP OUTS!
    My deduction - a problem with the HDMI cable.  Borrowed a friend's cable - wasn't going to spend another $50+ if the cable wasn't the problem.  And lo and behold the HDMI cable was the problem.
    Only took 3 hours.

  • My phone keeps shutting down approx every 5-10min for about a minute then turns back on, I have updated the software so thats not the problem, anyone have any ideas?

    My phone keeps shutting down approx every 5-10min for about a minute then it turns back on itself. I have updated the software so thats not the issue, any suggestions?

    Do you have a case on the iPhone or have you damaged it in anyway? If you have a case, try testing without the case.
    Also, try restoring the iPhone and testing it as a new device.
    If that doesn't take care of it, get a Genius to take a look at it or setup service online.

  • Orange LED on power adapter won't turn green after 10.4.7 update?

    Hey guys,
    this could be independent of the 10.4.7 update, but I've noticed that after the update, the LED does not turn green. The battery seems to charge fully, but the icon says, (Calculating...) and the LED stays orange. (left it like this for a whole night)
    So far I've tried to reset the PMU and repaired permissions with no luck. Currently I'm calibrating the battery but I'm wondering whether anyone has had similar issues and whether anyone has a fix for it. Thanks in advance.

    Hey there. Have you had any other issues with your battery, ie. not able to fully charge, or shutdowns before the OS tells you power is getting low?
    The reason I ask (not to scare you) but this inability for the charger to turn green was the first symptom I saw when my MacBook Pro battery was in the process of dying. It happened about two weeks before things went south for this battery. As you may have read on this board, there was a run of batteries for these machines that have shown some serious problems. Ultimately what happened with mine was that it would get down to about 34% charge, and then the machine would just turn off. The battery also would often not charge all the way up to the green indicator, either.
    I am unsure of what else you can try, other than maybe resetting PRAM. Just be on the watch for increased battery flakiness over the next couple of weeks. Not to worry, Apple will replace the battery for you free of charge.

  • KDL-40EX720 horizontal thin lines that appear on screen after 10 minutes of turning on the TV

    Hi, I have a KDL-40EX720 that is showing Horizontal Thin Lines on screen after around 10 minutes of turning on the TV (that is when TV is warm), this incident occured after three years of purchasing the TV so it is not covered anymore by the warranty policy or terms.
    These thin lines are too many and very thin that seems that screen is partially showing blurred images, this means that my TV screen is split into a part that is like 80% of the screen and covered with these blurring thin lines while the 20% of the screen is still showing normal picture.
    I tried several sources of input, to confirm that problem is not only from HDMI, but in all cases it is showing the same, even when you press on the menu button, the display is also affected by these lines.
    I sent the TV to Sony Repair and Maintenance Center in my county Lebanon. They said that problem can be in T-CON board that is inside the TV screen, and they also said this board can't be replaced because it is built-in with the screen. Also they can't repair it.
    They said that screen need to be replaced, but it will cost me around 600$ that is equal to the price of a new KDL-40W600.
    It is obvious that my TV has a faulty component, and I need community support in letting me know what could be the cause of these horizontal thin lines, and if really T-CON board in KDL-40X720 can't be replaced or repaired.
     Thanks in Adcance.  

    Please see the other topics in this forum related to your question.
    http://discussions.apple.com/thread.jspa?threadID=967815

  • When using iPod in my iPhone it plays for a minute then goes to pause, how do I stop this?

    When I play iPod music on my phone it will play for a few seconds, even minutes & then will sort of crackle/hesitate and the player goes to pause.
    I hit the play again & the same happens.
    I have tried a soft reset, any idea what else I can do?

    Chea,
    8-3 isn't, strictly speaking, a number, so Numbers guesses it's a Date when the default format of Automatic is in force. You can override the guess by formatting the cell to something other than Automatic.
    It may seem perverse to you, but formatting the cell as Number prior to enterint the string 8-3 causes it to be presented as Text. This will solve your problem, I suppose, since it will not longer be a Date/Time object.
    On the other hand, if you were tring to express an operation involving two numeric values and the subtraction operator, then you could write: =8-3. The resulting display would then be 5.
    Jerry

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

Maybe you are looking for

  • Need to update mutli record in oracle forms - Urgent please

    Hi, We are using Oracle apps release 11i - Oracle forms 6i. I have a field "project_start_date" in project_block in a custom form. There is another multi-record block called role_block in the same custom form and it has a field named start_date. Requ

  • Rows to column in 11g

    I would like to convert the below rows into 8 column values. ie this query should always return 8 columns like desc_line1, desc_line2, desc_line3 etc..... desc_line8 select * from     select desc_line from               select transaction_id, line_no

  • How to add freight in sales order via DI ?

    Hi, Does anyone know how I can set the freight value when I try to create sales order via DI. I checked SDK help, there is fields like BaseAmountSC. But it is read-only in DI.  And I also found there is a table called RDR3, it says it is about freigh

  • Using Webutil in oracle 10g forms

    Hi all I have a form that has a button for showing calendar which is configured using webutil. This form is not created by me. Now the problem is when the form is ran on web it does not show the calendar. Please suggest me how to solve the issue.

  • IView Date Format

    Hi, Is there anyway of changing the format of the date in a pre-delivered iView?  Is there a setting on the portal? We have a standard of having our date in the format yyyy/mm/dd.  Some of the iViews have the format of mm/dd/yyyy.  I want to change t