My iPhone turns off when on the charger. I've tried the computer usb port and wall charger. Whenever I put it on the charger it powers off completely and attempts to turn back on but fails, then tries again and fails again, etc... solution?
I can turn it back on but when it's on the charger it just soon turns off again. Not sure if the new update is the cause of this or not. Any solutions?
it sure sounds like the battery is defect
Similar Messages
-
when i charge my iphone it has the plug instead of the lightning bolt showing its fully charge but the percentage will stay the same or go down. when i plug it in it turns back on but turnes right back off because its at one percent and it keeps repeating the process. if i just try to turn it on it loads the aoole logo the the lock screen then turnes right back off. please help!!! i have a cdma verizion iphone 4 if that matters
Bring your phone into Apple for battery diagnostics.
-
Please help! My mac is about 6 months old and I was just playing with my keys and stuck it in the USB port and then it crashed and won't turn on, it's not picking up the charger (the little led light isn't on) and pressing the power button does absolutely nothing
Don't be so surprised, people have stuck worse things in worse places before and it was on purpose
+1
How am I meant to get the the apple menu if the laptop won't then on
Reset the SMC first. If this doesn't work, reset PRAM. Move down troubleshoot with links below. First, SMC reset for MBP models 2009 and later:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM
Resolve startup issues and perform disk maintenance with Disk
Troubleshooting: My computer won't turn on -
my iphone 4s was working fine then it just turned off and wont turn back on but my home button dosent work what do i do?
Apart from the battery being dead (make sure by plugging into a power source for 15 minutes), hold the sleep/wake button and home button together for 10 - 20 seconds or until the apple logo appears.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support -
Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??
Also my Itunes and computer won'r reconize it
-
My ipad is stuck on Apple ID Security and won't let me go anywhere else. It is frozen on this. Tried to shut it off and turn back on, but it still come up with this window.
I was updating the ios 7 and it ask for my icloud information. I just now started it up and it let me do the changes. Thanks.
-
My iphone turns green after a minute then turns off
my iphone turns green after a minute then turns off.
does anyone know what this is and how to fix it?oh and also after i turn it off for like six hours it stops for 5 hours and then its back
-
When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?
Turn the printer off.
-
my pc crashed and erased my itunes songs purchased from the itunes store. How do i get that content back without having to purchase them again?
I have somewhat of a similar problem. After iTunes last update, I am missing some of my purchased files of music,ringtones, and TV shows. Possibly movies, but just thought of that and did not look yet. Seems everytime there is an iTunes update, something happens, but usually an easy fix by just deleting music files from CD's that I loaded onto iTunes and no longer recognized after an update and reload from the hard drive. This time I do not have a current back up of all the music, ringtones, and tv shows I have purchased.
So I am also wondering how can I redownload purchases without being charged when there is no file left on the hard drive. It just stays listed in iTunes though. -
Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.
Hello csmithhisler,
Congratulations on your new iPhone 5c! I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes. I recommend following the steps in this article to troubleshoot the issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
i need to completely delete a number from my iphone, so that when in the letter of a contact i have deleted in a new messagge it does not come up? HELP
Only by restoring your phone as a new device using iTunes, or Settings>General>Reset>Erase All Content & Settings. You follow this by syncing your content back to the phone. Either that, or you live with it. The data will be overwritten as you use your phone.
-
I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH. I am not a current Verizon customer, but I was visiting friends and we had to go to the store to get something taken care of. First off, allow me to compliment the nice, new store. Boy, its changed over the past few years ago when I was in last. My comment is mostly directed to one specific employee. When we entered the store, we were "welcomed" by a sloppy dressed gentlemen (his clothes were probably two sizes two small), which really struck me as unusual because every other employee in the store was dressed really "casual" with nice sporty clothing and red shoes. Either way, after being entered into the computer, the gentlemen told me to wander around or have a seat in the back and someone would be with us soon. As soon as we walked away from the door, the gentlemen handed his "duty" off to another employee who took over welcoming people coming in. For whatever reason, I felt glued to him as he stood out to me. After leaving the door, he immediately went to the back of the room, hunched over a cabinet, where he stood for the next 30+ minutes playing on his phone, frowning and not speaking to anyone around him. Again, I found this unusual because everyone else was overly friendly and smiling. I finally decided to walk by and see what he was doing. It appeared that he was texting someone. He paid no attention to me whatsoever as I walked by, just continued to frown and text on his phone. I did take not of his name tag for future reference. His name was Justin. I am assuming he's the manager of the location as he was just standing around while everyone else worked. I do understand that managers aren't necessarily doing the "dirty work" of the employees, but he could have at least found some better fitting clothing (I find it hard to believe Verizon doesn't supply it), been a little friendly, pretended to be busy, and not been texting the entire time we were there. Again, the store was great, the other employees were very helpful, but the manager seemed to be doing is own little thing and it didn't put off a good image for the rest of the store. Just wanted to share my comments.
lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport -
can anyone tell me how to restore my iphone? Itunes will not let me and now my screen just has a usb port and itunes on it?
Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple.
What this means is you have to delete your .ipsw file (it may be corrupted or old) and attempt to restore your iPhone again.
Where the .ipsw file is found:
Mac - ~/Library/iTunes/iPhone Software Updates
Windows XP - C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
Windows Vista/7 - C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates -
HT201257 How can I run the hardware test when my USB ports and bluetooth doesn't work?
The USB ports and the Bluetooth suddenly will not work on my Mac Mini (2008). There is very little I can do except using Remote Desktop. To run the Hardware Test, the D key has to be pressed during startup. I got no key to press. Is there any other way to do this?
Sorry, focused on bluetooth issue. If USB and bluetooth are knackered, try an SMC reset:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer. -
The app game that I bought for iphone is not available in the itunes store anymore. How can I get it back on my iphone 4
If it's no longer in the store then you won't be able to re-download it - do you have a copy of it on your computer's iTunes (or on a backup) that you could sync back to your phone ?
Maybe you are looking for
-
How to populate list of materials in IM level Physical Inventory document?
Hi, Suppose we have maintained 1000 materials in storage location ABCD. Now when I undertake physical inventory process at IM level, I have to create physical inventory document for this storage location ABCD and I will have to input all these 1000 m
-
Flash 2004 MX will not import .FLA's into the library
I can't imagine why this is- but if someone has some eperience here- I would be so ever grateful. I can't get Flash MX 2004 to inport FLA files into the shared library. When I select inport/into shared library I get an error message that says flash d
-
List of messages in the PCUI screen
Hi Friends, Iam working in CRM 4.0. We have a list of messages displayed on the top of the PCUI screen. We can see a message on the top and a 'Show List' link at the top right side. When we click on that 'show list' it displays the remaining messages
-
Illustrator cs4 says memory full, images gone, please help
is anyone awake? It's almost 3 inthe morning and I'm in computer ****. I might loose hours and hours of work. anyone help with mac memory?
-
Can I rename an emebedded graphic file without having to re-do my designs?
Hi folks... Once having created and published my site, is there a way to rename the names of the graphic files which have been embedded without having to first rename them, embed in layout, then publsih again? Eg. say my home page has two graphic fil