My iphone turns off whenever I make phone calls or someone tries to call me...I've had it replaced several times in the last month for different reasons and i'm frustrated and I don't know what to do?
I don't know what to do about my phone and I don't want to have to deal with sending it in to get fixed all over again
What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)
Similar Messages
-
My computer froze, so I shut it down for a few. However, once I started it back up, it's been on the loading screen for a very long time and the computer is getting hot.
try holding power button for 10 sec after that
turn off the mac completely
as soon AS you hit power button press following 4 keys
Option + Command + P + R
that should reset it -
basically the title says it all...I've been using this for the longest time and now after i was syncing the ipod while downloading an update for Itunes the sad face ipod icon shows up and everything i try won't fix it. I'm wondering if anyone knows how they can help me fix it...please!
The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
I assume you have seen this article yet?
iPod display's a sad iPod icon
If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
https://discussions.apple.com/thread/1193481?start=0&tstart=0
B-rock -
my ipod touch has been disabled and needs to be plugged into itunes to reset it. However, the computer it was last synched with has broken and I don't know what to do!
You need to place the device in recovery mode.
Instructions here > iOS: Unable to update or restore
"If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present" -
I accidentally scratched off the code on my iTunes card and i don't know what to do now?
If the page that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
hi,
I like to know if somebody has a laptop with windows 8.1 installed and has a recovery partition in the case of reinstalling windows 8.1. somebody has erased all harddisk with low level format for some reason.
now this man has no more 8.1 to reinstall it. I have my self the dvd of this version of windows 8.1 or suppose the trial version ,
if I install the windows from my dvd (or the trial version )and activate it with his product key which is on his laptop voor his 8.1 version.
is this action illegal or not ? if this action is illegal i like to know why?
thanks
johan
h.davidIf a proper license is held for the product, MS do say that you can use any legitimately-acquired media to re-install.
If the computer originally shipped with a manufacturer-supplied copy of Windows (OEM), then only the media from the OEM should be used. This might require him to purchase a set of recovery discs or USB from the OEM.
It may be possible to retrieve/download a copy of Windows 8.0 or 8.1 from the MS website, with only a product key, but, it is common for modern computers sold now, that there is no visible product key (instead, the key is stored in firmware)
If you need to download Windows 8.1, to create installation media, this article may help:
http://winsupersite.com/windows-8/windows-81-tip-download-windows-81-iso-windows-8-product-key
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
My iphoto crash few days ago and since few days my imac is try to rebuild the databese....now is 4 days and i'm warryes abouth all my pictures.
what should i do?Try resetting the iPhone,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back. -
The side scroll bar is locked so I can't read anything on the web. Also, I cannot get any video on YouTube, etc. It is a black screen.
See the troubleshooting for a white-screen included here:
iPod touch: Hardware troubleshooting -
Please answer this is urgent
see this discussion...
https://discussions.apple.com/thread/5294290?tstart=0
From the More Like This section on the right -
I need help, my MacBook Pro keeps restarting itself for the last two hours saying there's a problem. I can't get past the grey screen without it restarting and i don't know what to do...please help me
Reinstall Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
Hello,
Do you know what I can do when my Iphone is blocked with the apple appearing ?
I cannot enter into the phone and I don't know what to do ?
Thank you for your help
AMGSOBasics from the manual are restart, reset, and restore.
Have you tried these? -
I am trying to set up my college email on my phone, but it says it can't verify my account. I have tried just about every server name possible and I don't know what to do. Help?
Yes. Check your student manual or contact your help desk.
-
My Mac Pro all of a sudden would not turn on. It beebs 3 times, pauses, and then does it again. I don't think I have downloaded anything recently and I don't know what to do!
3 beeps usually means a Ram problem, have you added or removed Ram recently?
And I will assume that you do not have a Mac Pro, but that you have a portable, a MacBook Pro. -
The display on my computer has turned into pink lines and i don't know what i should do
The display on my computer has turned into pink lines and i don't know what i should do
what model and version of osx. You can also try a apple hardware diagnostic, restart holding option + D.
Maybe you are looking for
-
Read only user creation for Oracle EM Console 11.1.1.5
Dear All. I have created Read only user for Oracle EM Console. I have followed below link to do the same http://moshe-soa.blogspot.com/2011/09/blog-post.html. I have noticed with read only user is that TEST button in EM Console is active means user w
-
Useful Document/resources For Begginners
this document is easily on net WS-BPEL Guide Last changed on Dec 10, 2004 by Matthieu Riou What is this article about ? This is an introduction to WS-BPEL that should give you a practical understanding of what you have to do to create a nice WS-BPEL
-
R/3 Directory mounting problem
Hi Experts, I am doing file to jdbc scenario, R/3 and PI are in the same same network so I asked basis guy to mount the R/3 directory in PI server. R/3 is installed on UNIX OS and PI is installed on Microsoft windows OS. Basis guy has mounted the R/3
-
InfoPath Field Promoted to SharePoint Form Library Cannot Edit
Greetings, I have an InfoPath 2013 form with a field named "Form Stage". It's purpose is to maintain a process stage that is subsequently used by a SharePoint Designer 2013 workflow. When the "Form Stage" field is not promoted to the column in the f
-
How to convert text values acceses from jsp page into an xml file?
/* this is the jsp page which i want to convert it into an xml file please help me , i thank in advance*/ <html> <head> <title> xml test</title> </head> <body> <form action="testxml2.jsp" method = post> <ul> <li> <ul>NAME: <br> <li>First Name:<INPUT