My iPhone updated its firmware and now my wifi is greyed out, how do I fix it?

Happened on the last update before iOS 7 and upgrading to 7 hasn't fixed it

My issue was the chip was working fine, until apple updated their firmware. Upon speaking to apple staff not one of them told me the wifi chip failed but they admitted that it was an underlying cause and the firmware update was to blame. I have taken great care of my phone but I refuse to pay to fix problems caused by the manufacturer. It's upsetting to find apple manufacture suicide switches into its technology like this as my MacBook stopped loading internet browsers after an update, again I was told I had to pay to get it fixed.

Similar Messages

  • Did up date for 10.7.4 to 10.7.5 and update for Aperture and now  Aperture doesn't open.  How do I fix?

    Did up date for 10.7.4 to 10.7.5 and update for Aperture and now  Aperture doesn't open.  How do I fix?

    I heard dump the app and reinstall?  How do I go about that?

  • I just updated my iphone 4sto 6.0.1 and now my wifi is greyed out

    I just updated my iphone 4sto 6.0.1 and now my wifi is greyed out

    http://support.apple.com/kb/TS1559

  • My ipod touch shut off and now it wont turn back on, how do i fix that?

    my ipod touch shut off and now it wont turn back on, how do i fix that?

    Hey lattifahfromny,
    Thanks for the question. Based on the information you have provided, the following resource may assist you:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

  • My apps won't update or install. I would push the update/install button, and it wouldn't do anything. How do I fix that?

    My apps won't update or install. I would push the update/install button, and it wouldn't do anything. How do I fix that?

    I would do a restore using iTunes.  This will re-install the latest iOS 6 with factory settings, then you'll have to re-enter your settings and re-install your apps.  But everything should work after that.

  • TS3274 i dropped my ipad and now i have a "green screen" how do i fix this?

    i dropped my ipad and now i have a "green screen" how do i fix this?

    If it's an iPad 2, it's old enough to be out of warranty. Courcoul's suggestion to trade it in for a new one is ok if you are in the market. If not and you want to take a risk - and possibly a big one at that - others have reported a pretty extreme solution to this problem. Slap it on the back.
    I know, I know. It's sounds crazy, but there are several threads here claiming it works.
    Here is just one of them. You can do a search to find others.

  • I have downloaded an app from the Istore and now I can't figure out how to open it or use it

    I have downloaded an app to use on my laptop and now I can't figure out how to open it and use it.  It shows it in the download area..........any suggestions would be great.

    Have you looked in your menu of programs (in Windows:  Start -> All Programs -> etc....)?

  • I upgraded my mac to os x mavericks and now I have no sidebars. How do I fix this?

    I upgraded my mac to os x mavericks and now I have no sidebars. How do I fix this?

    Open General preferences in System Preferences. Make you sidebar selection via the option buttons.

  • I updated my iPod touch 3G to iOS 5.1.1 and the wifi option has greyed out. how can i fix this problem quickly ?

    i updated my ipod touch 3g to ios version 5.1.1 and the WiFi option has greyed out
    how do i fix it ??

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I updated my phone and now all my app are gone how do i get them back

    I updated my iphone and now all my app are gone how do i get them back

    I only have one apple id, and for sure they are all my ipad apps some are the same and i redownloaded those, but the purchased ones are not there I even restarted my iphone hoping it would help but didnt

  • My ipod went through the wash about two years ago and now the wifi is dimed out and wont let me turn it on. :/

    okay so , my ipod is about two years old and went through the washer and dryer. no one has used it for two years because no one ever took the time to fix it, until now when my previous ipod cracked and barley works now. So i took it upon my time to fix this washed ipod and i have been able to successfully restore it and , backup, and restore backup. i have also reset the network settings, and still my wifi is dimmed out and wont let me switch it on, i have read the apple websites resolution to this problem and i have tried it and they do not seem to work as my wifi is still DIMMED out. I would like to switch over to this one because my cracked one is hard to use, but in order for me to use this one it would be very nice to have wifi so i could download apps, and when i restored and reset the ipod to act like a new one, it wont even let me sign in to my apple id because i do not have Internet, now the funny part is my wifi is working fine for my 5 family members and their phones/android tablets, i am the only one who has an apple device. please right back!!! thanks!

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • After only 10 minutes of gameplay my screen dimms by its self and the battery Is very hot. How can I fix this?

    After only 10 minutes of playing Order & Chaos online...my screen dimms. When I take it out of the otterbox defender case I find that my phone Is very hot.
    I thought that maybe the case was suffocating the phone so I took It out of the case and tested it and I got the same result. How can I fix this?

    Do a Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Working w/ existing HTML - there's no stage, and "snap to guides" greyed out - how do I fix this?

    I designed my page in Dreamweaver CS6, and I want to animate the elements with Edge Animate...
    I've noticed, though, that I don't have a Stage in the Elements panel, I'm trying to follow along some instructions/tutorials and a lot seems to start with adding code to the stage or code that references the stage... in lieu of this, do I just create a .container div and use it the same way?
    ALSO, I can't seem to use the "snap-to-guides" Feature in the View menu... it stays greyed out, how do I turn that feature on?
    PLUS it's not allowing me to switch anything from px to %! I select any of my div's in the elements panel and the little px to % switches are greyed out!!
    ... basically what I'm trying to do is center an image/symbol on my web page but without guides, that's tricky and I'm just estimating things (I want the starting image in the exact center of the screen when my animation starts...
    Thanks for any help!

    it sure sounds like the battery is defect

  • If two iphones were updated using the same apple id and now are receiving the same messages, how do i fix this?

    Hey guys. So i recently downloaded ios7 for my iphone 4s and so did my mom. But my mom decided to update her phone as well using the same apple id. Now she is recieving all of my messages instead of me. Please let me know how I could fix this. Thank you.

    Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

Maybe you are looking for

  • Crystal report - and oracle connections

    hi to everyone i installed client  of oracle and after that - the crystal report 2008 sp3 when i open new (blank page) - and looking for a oracle connection its look like he doesnt exist. please if someone know why i cant see the connection to oracle

  • How do i get my podcasts to go from the one i just finished to the next one and how do i sort them from oldest to newest?

    how do i get my podcasts to go from the one i just finished to the next one withouth me having to click on it, and how do i sort them from oldest to newest?

  • Error -120?

    Brand new installation of GB3 on a Powermac G5, 10.4.5, I cant import any audio files, all I get is a error -120 message. Happens with song files from GB2 which have had audio files (.wavs, .aifs. etc) imported into them with no problem, also with ne

  • Stack Overflow Jrockit 1.4.2_08 JVM R24.5.0-61 ari-49095-20050826-1856-linu

    Hi All we are using jrockit on Linux, we have a cluster that consists of 2 machines and each machine has 2 managed servers. the dumnp always happens on the one of the managed servers on each machine. Initially the cluster had 2 managed servers , one

  • Certification for WM

    Hi I know this question has been posted before, but I didnt find the answer I was looking for. I am interested in WM certification. Is the SAP WM certification called : SAP Consultant Certification Solution Consultant SCM u2013 WM & LE with mySAP ERP