My Iphone vibrates after upgrading to IO6 even with vibration off

After upgradin my Iphon 4 to io6 it vibrates even with vibration turned off.  What gives?

back up to itunes, erase phone, set up as new, and then restore from itunes backup. This should fix the issues. If not then make an appointment with Apple because you have a hardware issue.

Similar Messages

  • IPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

    iPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

    https://discussions.apple.com/message/25195858#25195858

  • Voice memo missing on iphone 4s after upgrade to ios 7

    voice memo app is missing on my iphone 4s after upgrading to ios 7. any ideas?

    Miracle!!!!!!
    The iOS 7.1 update solved the WIFI issues on my iphone.
    I'll try to upgrade my ipad later on and then
    I think I can sell my hairdryer and my freezer.
    Thanks to the people @ infinite loop ;-)

  • Why has Siri stopped working on iPhone 4 after upgrading to IOS 5?

    Why has Siri stopped working on iPhone 4 after upgrading to IOS 5? I've tried the disable and reboot but continue to get the network error.

    Apple has not been forthcoming on the explanation. My Siri worked on my iphone4 (not 4s) immediately after upgrading to IOS5, but I take it they have redirected the servers that used to support Siri to only work with Iphone4s.
    It is one thing for apple to only bundle the improved Siri with IPhone 4S, or  for them to remove Siri from the Ap store.
    But it is another thing all together for apple to purchase a company, and then cease the service that many of us paid for.
    Attempts to contact apple at apple store and via email have been unhelpful.
    Apple Fan--

  • HT1695 how do i activate my iphone 4 after upgrading to ioS 5.1

    how do i activate my iphone 4 after upgrading to ioS 5.1

    I'm not sure I understand what you're asking, but I'll try to answer!    You can either connect to iTunes and set up and activate there, or you can also use the setup assistant to set up your iPhone.  As far as carrier activation, you'll have to follow the protocol that your carrier uses.  Either switch SIM card, or call the number they use to allow device activation.  Is that what you were wanting to know?

  • I'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

    i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

    Did you check your security software settings? eliminating conflicts from third-party security software.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Why can't i activate my iphone 3gs after upgrading it to ios 6?

    why can't i activate my iphone 3gs after upgrading it to ios 6?
    It says,
    ''There is no sim card installed in the iphone you are attempting to activate''
    Thanks for your help in advance!
    Kayl07

    There are several common causes for this problem:
    Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
    You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
    Your phone is jailbroken or otherwise hacked.

  • HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

    i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

    read http://support.apple.com/kb/TS3424

  • I cant activate my iphone 3gs after upgrade to 5.1.1

    i cant activate my iphone 3gs after upgrade to 5.1.1

    I am experiencing the same issue and could use some advice:
    Yesterday I plugged my Iphone 3GS into my computer and I selected in Itunes to update to the latest IOS 5.1.1.
    Before I did this the iphone worked correctly, and after I did this it will not let me access the apps at all. I went to the Apple store and the rep told me I needed to have a working AT&T sim installed in it to complete the upgrade. I went to the AT&T store and had them put one of their working sim card in and it would not work.  The AT&T rep said he has seen several people with Iphone 3GS who updated to the latest IOS 5.1.1 whos phones will not recognize the sim card and thus will not let you get to the apps. 
    Does anyone know how to correct this problem?

  • No apps on my iPhone 3GS after upgrade to 5.0

    I can't get my apps from my computer to my iPhone 3GS after upgrading to 5.0.
    Do I have to DL all my apps again  from the app store?

    I am experiencing the same issue and could use some advice:
    Yesterday I plugged my Iphone 3GS into my computer and I selected in Itunes to update to the latest IOS 5.1.1.
    Before I did this the iphone worked correctly, and after I did this it will not let me access the apps at all. I went to the Apple store and the rep told me I needed to have a working AT&T sim installed in it to complete the upgrade. I went to the AT&T store and had them put one of their working sim card in and it would not work.  The AT&T rep said he has seen several people with Iphone 3GS who updated to the latest IOS 5.1.1 whos phones will not recognize the sim card and thus will not let you get to the apps. 
    Does anyone know how to correct this problem?

  • HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

    im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

    Activation issues are almost always the result of a device that has been hacked or jailbroken.
    If this is the case, no support can be provided here.

  • HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier.  The phone will now activate and operate only with that original carrier.

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    Additional testing i perform to make wifi work but nothing works out:
    i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
    wifi was working with older software versions. i think there should be a problem with 8.1.1.
    is anyone has fix for this issue?

Maybe you are looking for

  • All Java Processes off by 1 hour?

    Hi folks, I noticed that all my java apps/development etc..are off by 1 hour. I'm guessing this is related to DST.. java -version java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04) Java HotSpot(TM) 64-Bit Server VM (build 14

  • Help with VARRAY in PL/SQL

    I wrote the below Stored Procedure in a package. I am not able to execute this, can anyone please help Package Definition: CREATE OR REPLACE PACKAGE "CDS_SUBLIMIT_TYPE_PKG" as TYPE COLLATERAL_ARRAY is VARRAY(100) OF NUMBER(29); procedure get_original

  • Security update 2007-003

    i recently purchased a usb modem over here in germany for my powerbook. Well it worked fine for the first week, then once i downloaded the new security update, the program i needed to go online would open, and bounce on the dock, and not respond at a

  • Why does the Hub think I live in Hampshire - I liv...

    OK - here's a good one. I recently bought a used HH3 to replace a slightly flaky HH2 - all went well with setup (without the installation CD) and everything works fine ..... except when I check the weather or use Google Maps on my HTC Wildfire phone

  • Blank space in Amount field

    Hello All, I have one clarification.I have one field called amount.Its value is taken as 0.00 from the table. I have to make it as blank.I have made it as blank to that field in display pattern properties by setting as * in adobe designer. This is su