My iPhone volume seems to increase and decrease by itself, why

Why does my iPhone 5s' volume increase and decrease by itself when connected via bluetooth to headphones, speakers, etc?

Do you have your Facebook app open when this is happening? Or any other app that gets live Notifications? If so, close them when listening to music. The Notifications being pushed to your device will lower the volume momentarily as they arrive.
Cheers,
GB

Similar Messages

I am using i phone 4s 64 gb.recently got a re furbished phone.when i check it,i can see a minute difference,volume increase and decrease bottons are alligned upside down.what i can do now?

hi there,i am raj from new zealand.i am using my i phone 4s for the past two and half years.i found a difficulty with my phone and then i called apple care and send my old phone and got a refurbished piece in the starting of this year.
and recently i noticed that the volume increase and decrease bottons are mis placed(placed upside down).
as per my concern,apple is a great organisation and this mistake is going to be a big problem to their name and business.so please some one help me out to talk to a right person to deal about it.
thanks

If there is Warranty or AppleCare, take to Apple for resolution. If no coverage, do not worry about it, the button is the same either way. Your iPhone will function perfectly.

Volume bar increases and decreases normally, but no sound!

I'm having a problem where I can press the button to increase and decrease the volume and the bar goes up and down accordingly. However, there is no sound whatsoever coming out of the laptop, what might the problem be?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications/Utilities/ Audio MIDI Setup.app
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so uncheck it.
Best.

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

Issue on space . Disk space increases and decreases automatically

Hi All,
In our QA environment for past 2 days we are facing issue on space . some unusual behaviour. Taken threaddumps at that time and found the issue
"172.30.104.53 [1373723166026] <closed>" daemon prio=3 tid=0x0000000101dca800 nid=0x135f in Object.wait() [0xfffffffd8a9ff000]
   java.lang.Thread.State: WAITING (on object monitor)
        at java.lang.Object.wait(Native Method)
        - waiting on <0xfffffffdf9743658> (a com.day.j2ee.servletengine.HttpListener$Worker)
        at java.lang.Object.wait(Object.java:485)
        at com.day.j2ee.servletengine.HttpListener$Worker.await(HttpListener.java:587)
        - locked <0xfffffffdf9743658> (a com.day.j2ee.servletengine.HttpListener$Worker)
        at com.day.j2ee.servletengine.HttpListener$Worker.run(HttpListener.java:612)
        at java.lang.Thread.run(Thread.java:662)
Please let me know where exact issue on thread.

If you are seeing daily increases and decrease in your disk utilization (for example it increases during the day/overnaight but in the morning the disk space has recovered what you are seeing is the impact of Tar optimization.
The Tar Persistence manager is the underlying storage mechanism for CRX. Data is stored in append only tar files. This means the when you update a node or property the new values are written to the Tar files, the indexes are updated to point to the new location, but the old data is also still left in the file. This mechanism allows for a much faster write mechanism. So the more you frequently you update existing content in your repository the larger you Tar files becomes.
There is a process called Tar File Optimization that by default is scheduled to run from 2 AM to 5 AM server time. This process identifies all the orphaned data in the Tar files and deletes, there by reducing the size of the tar files on disk.
So if you are in heavy content migration mode, or moving large amounts of content between instances you can see large swings in your disk space utilization as the Tar file balloons up during the day and then shrinks back down over night. In some cases depending on how large your repository is the 3 hours allotted by default is not sufficent to complete the optimizaiton so you may not be recovering all your disk space. During normal production operations this will normally average out over time and the 3 hour window is enough. However during periods of heavy usage, especially during QA or content migration you may find that your tar files are ever increasing in size. If that happens you need pick a period of time over say a weekend and trigger the Tar File optimization to run until complete to recover as much of your disk space as possible.
See http://helpx.adobe.com/crx/kb/TarPMOptimization.html for details on Tar File Optimization.
As someone else pointed out you may also have an issue with your data store which requires a different clean up method.
Another possible culprit is your Lucene index files. Depending on your data model and repository size you can swings in your Lucene indexes because like the Tar File it periodically cleans itself up and large amounts of content change can cause this cycle to become more pronounced.
This blog post dicusses in more deapth both Tar File Optimization and Data Store garbage collection. http://blog.aemarchitect.com/2013/06/17/importance-of-aem-maintenance-procedures-for-non-p roduction-boxes/

After iOS7.2 update my iPhone 4S will no longer feel the volume of the video and sound alerts. Why?

after iOS7.2 update my iPhone 4S will no longer feel the volume of the video and sound alerts. Why?

http://support.apple.com/kb/TS2802

U: drive keeps increasing, and decreasing?

So basically my U: drive keeps increasing and decreasing.. I check it every day, and it says 16.2X (where x is a random number). Usually it is in the 16.2x range... For example: 16.27, 16.29, 16.23 ..etc... And I check my U: drive everyday.. I understand, that is not a problem, and its normal.
But, today I checked my U:drive, and I was SHOCKED, because now it says 16.5x.. Right now its at 16.52, and I have NOT INSTALLED ANY PROGRAMS.
Where in the world did 300mb of memory come from? Is it because I have been watching a lot of youtube videos?? I dont see how that would take up so much space..
How do I get back to normal which is 16.2x...?

Having the same problem every few seconds it adds a minute to the estimated time. This is really annoying. I'll call apple to figure something out because I need to backup to to icloud since I have a battery issue with my phone!

My iPod Touch 4th generation is about a year and a half old. Today it got wet and I dried it off, but now it is turning on and off by itself and the volume is going up and down by itself. What do I do?

My iPod Touch 4th generation is about a year and a half old. Today it got wet and I dried it off, but now it is turning on and off by itself and the volume is going up and down by itself. What do I do?

First dry the iPod.
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
Then
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

My iphone keeps randomly turning on and off by itself, but it wont stay on long enough for me to restore it on itunes...help me please :-(

my iphone keeps randomly turning on and off by itself, but it wont stay on long enough for me to restore it on itunes...help me please :-(

there must be a problem with the power button.
contact apple they will help you
Apple: 1-800-MY-APPLE

Headphone Jack Problem - Volume Increases and Decreases Randomly

Hi, has anyone encountered this problem?
Whenever I plug in earphones the volume increases or decreases without me even touching the phone. It also disconnects alot whenever the earphones are moved.
I have already updated my phone to the latest software and also did a factory reset however the problem is still there. I guess the headphone jack is broken, guess I will have to send it in for repairs

You can either return it to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

My iphone volume bar disapears alot and wont play with speakers and my lock button has been jammed

Recently my lock button on my iphone 4s got jammed and it wont play music. The entire volume bar will disapear and even when i have headphones plugged in the music will randomly stop and speakers wont work through a dock connector. Any

Your Sleep/Wake button is jammed, and it sounds like you have many other issues for your device. Sounds like physical damage. You may need to visit an Apple Store so they can offer you an out-of-warranty replacement for $199.

Increase and decrease a numerical text layer over time

I need to create a text layer with a numerical value that will range from 0% to 100% over time using key frames. I need the value to change over time, increasing or decreasing the percentage based on key frames. Any ideas? Thank you!

Add a Slider Control effect to the text layer, which you use to keyframe the percentage, then use this expression on the text layer's Source Text property:
effect("Slider Control")("Slider").value.toFixed(0) + "%";
The value in toFixed(0) controls the number of decimal places.

My volume keeps turning off and on by itself. It vibrates and the bell picture pops up without me doing anything. It doesn't matter if I have the selector switch on or off for volume. Any ideas?

Can anyone help me keep my volume from turning on and off automatically?

Hi Friend,
I have faced this issue yesterday, but just for one app. Then I went to Notifications Center, turn all the settings of that app to off then turn it on again. Rebooth the device (press and hold Home and Sleep button simultaneally until turns off the device and appears the Apple logo), then everything works at a glance.
Hole it helps

My speakers on my macbook receiently quit working after I had been using some headphones. My headphones still work whenever I plug them in with both increase and decrease in volume. I have also noticed a red light on the inside of the headphone jack.

My speakers on my macbook pro quit working the other day after using my headphones. when I try to adjust the speakers my screen indicator sayes that it is at full volume on the bar but also muted(circle with line through it). I also noticed a red light inside my headphone jack. My headphones still work including volume. Any quick fix?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

HT4526 i have an i-phone 4s what can i do to hear better. the receiver volume can increased but the hearing volume cannot be increased or decreased.

i have an iphone 4s and i am hearing impaired. how do i hear better on this phone? the ringer can be turned up and down but the receiver for people that cant hear well are s-o-l
don

I get this too if I used the mute switch. I will not hear my alarm or text & calls despite it being on max volume. I've found that I have to go to music or radio and see that it's turned way down. If I turn that up in music player, then my phone rings loud again. I missed a number or alarms due to this.
4s iOS6. But it has done this since I bought it.

My iPhone volume seems to increase and decrease by itself, why

Similar Messages

Maybe you are looking for