My iPhone was overstressed and there are these lines covering the screen making it difficult to access apps

My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
how do I make these lines leave so the phone can function as it should

J-dag97 wrote:
My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
how do I make these lines leave so the phone can function as it should
Take it back to whomever changed the housing.

Similar Messages

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  Help!

    I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  I'm uising photos in my project, not video.  Help!

    You can split a project in two by doing this.
    1) Go to the Project Library View.
    2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
    3) Do this again. This time name it "your project name - part 2"
    4) Open Part 1 for editing. Delete everything in the second half.
    5) Open Part 1 for editing. Delete everything in the first half of the project.
    At the end you should have your original project, plus the same project in two parts.

  • On my itunes library my albums are all sorted but when  i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad

    on my itunes library my albums are all sorted but when  i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
    thatnks

    Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
    P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

  • My iphone was stolen and i need to wipe it out but i do not have access to itunes what do it do?

    my iphone was stolen and i need to wipe it out but i do not have access to itunes what do it do?

    Open www.icloud.com
    Enter Your Apple ID and Passoword
    Open Find my iPhone And select your device and pick an action.
    1 Play alert
    2 Lock phone
    3 Earse Phone

  • My iPod touch fell on tile today and was cracked and even worse now half of the screen will not work! :''''( What can I do?

    my iPod touch fell on tile today and was cracked and even worse now half of the screen will not work! :''''( What can I do?

    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 or the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                                    
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • I have IPAD 1 and I would like to sharing the screen to monitor TV (video,photo,app). What are the options?

    I have IPAD 1 and I would like to sharing the screen to monitor TV (video,photo,app). What are the options?

    Unfortunately you do not have any options, the iPad one cannot be used for mirroring.

  • Just downloaded photoshop cc on my pc, when using the camera raw filter noticed there are no descriptions for the sliders! Very difficult to edit photos. Already checked preferences.

    Just downloaded photoshop cc on my pc, when using the camera raw filter noticed there are no descriptions for the sliders! Very difficult to edit photos. Already checked preferences. Anyone else have this issue?

    They should be labeled....

  • I reset my IPod touch because there were gray lines don the screen, and now the screen is flickering

    I reset my IPod because there were gray lines down the screen, and now the screen is flickering, any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost (not sure which reset you did)
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • They are dotted lines across the screen horizontally.

    When I upgrading to Lion Mountain, now I see somes "Drops" in the images. They are dotted lines across the screen horizontally. I reformatted and reinstalled OS 10.8.2, but the problem persists. I went to service, thought it was a video card problem, but it was not.

    I have this too! I just bought this iMac a few months back. These screen are having a lot of troubles from what I am reading. My horizontal lines are not that bad, but you can notice them.
    I might sell these computer off quick as apparently the quality of these screens is a nightmare.

  • My ipad mini fades out, freezes and shows streaks of lines on the screen. What is the problem or how can this be fixed?

    my ipad mini fades out, freezes and shows streaks of lines on the screen. What is the problem or how can this be fixed?

    try reseting the device
    try restoring the device as new
    then replace

  • When clicking a link normally - a new tab would open, but in this version a new window opens and there are 2 blue bars - the bar at the top of the browser and on the left hand side is a orange firefox button - Next time i start firefox it crashes!!!

    This window looks weird: there are 2 blue bars(the upper blue bar - normally there is 1, with the current page name and - Mozilla Firefox written in white inside of the bar) plus in the 2nd bar there is an orange firefox button, on the left hand side.
    I have already asked this question and was adviced to start in safe mode - this did not help either.
    Please help me quickliy, it is really annoying.
    Thanks
    Richard

    '''Firefox Crash'''
    Create a New Profile as a test to check if your current profile is causing the problems.
    -> Basic Troubleshooting: Make a New Profile
    * https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
    -> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
    -> Recovering important data from an old profile
    * https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
    '''Opening Links in New Tab'''
    -> click '''Firefox''' button and click '''Options''' (or Tools Menu -> Options) -> Tabs panel -> place Checkmark on '''Open New Window in a New Tab instead''' -> click OK
    Check and tell if its working.

  • My new iPad had a defect, but I just dropped it and there's a crack on the screen. What to do?

    Okay so I pre ordered the new iPad in white with 4G and it arrived on the 19th. It looked fine, but I've been having issues with the home button. Also, it frequently turns off by itself when I'm in the middle of doing something. I'm having trouble with syncing my apps onto it too, but I don't know if that's because of a problem with the device.
    I haven't had time to go to the store (it's pretty far) to get it looked at this week, so today morning I made an appointment for this Wednesday. Not long after, which is just a few minutes ago, I was at my desk and had my iPad on my lap. When I reached over to get something, it slid off and dropped to the floor. I would have completely gone insane at the fact that it fell, but I wasn't worried at all because the drop was only a couple inches higher than a foot from the floor. Also, when I picked it up the screen was face up. I immediately investigated the back for any scratches just in case, but not a single mark. I was so relieved but right when I flip it back over I see several cracks on the upper right corner of it (it's white so the cracks aren't clearly visible at some angles). I'm so surprised that it didn't survive the short fall.
    I am aware that Apple's limited warranty doesn't cover accidental damage... I was planning on getting Apple Care when I went to the store on Wednesday.
    From previous experiences, I am almost positive that the defect before this incident would have been covered by the limited warranty..
    But I'm assuming I'll have to pay for a replacement... but this is so upsetting because I've been waiting five months for this third generation to be released and all this happens before a week of being an iPad owner :/
    I was wondering if there are any chances of me getting this replaced without having to pay what I originally didn't have to ?
    Honestly, if I was a worker, I wouldn't believe this situation myself.

    You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

  • My iphones colors look inverted and there are white lines flashing

    This morning I woke up and my phone was completely fine. I unplugged it from the charger and unlocked it and the screen looked like the colors were inverted and there were white lined runing across the screen that were flashing. Ive tried reseting it on itunes and the condition is only worsening. Ive turned it off for now. whats happening? what should I do?

    Basics from the manual are restart, reset, restore from backup, restore as new.  Have you tried ALL the troubleshooting steps?  If not, you need to do so.
    If the problem persists after trying ALL the above steps, you'll need to bring your phone to Apple.

  • HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

    I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
    I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
    I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
    Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
    I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
    I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
    Thank you all in advance

    Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
    - To use the TC as a router or as an external HD.
    The difference between WPA and WPA 2 are:
    - They are two kinds of internet connection.
    WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
    If you need any help or if you find some difficult setting up it you can contact Apple Support.
    I am sure that they can help you with that.
    I am sory for the delay. I holpe that you solve your issue.

Maybe you are looking for

  • HELP! flash error code #1065 variable TCMText is not defined

    Hi, Im doing a project for uni and trying to create a search bar throughout the flash document for people to find what they are looking for. Followed a tutorial online step by step and then i get this error. #1065 variable TCMText is not defined. I'm

  • Different way to aggregate Essbase: Cannot aggregate to parent level

    Hi, I used to use the following statement in BR to aggregate dimensions: FIX("Segment Allocation Base") FIX(@IDESCENDANTS("YearTotal")) @IDESCENDANTS("Total Company"); /*Total Company is member of spare dimension: Market Segments */ ENDFIX ENDFIX The

  • URGENT!!!!- INTEL MAC "INVALID SIBLING DISK" error when run disk utility

    I am very upset, I ran my verify disk permissions, everything fine, repair disk permissions, everything fine, do t periodically just to mae sure all my stuff is in order,,,, then I decided to run te VERIFY DISK, because do not do it as much and want

  • Setting up a minimalist auto-optin

    I'm trying to set up a minimalist automatic opt in to email marketing list. While it currently works up to a point (email address is added to the subscriber list), it still sends off the opt-in email. This is the form code <div class="subscribe-to-th

  • Names do not correspond timeline media manager

    Hello, I'm trying to use media manager to send a timeline with only the used media to Da Vinci. Something weird happens with the names of clips that come from the same source clip. Normally MM makes a new source clip for every clip in the timeline wi