My iphone wil not turn on, it has some battery life but will not charge or conect to itunes?

my iphone 4 will not turn on. it had some battery life but it wont charge up or conect to my computer. Help please?

Your battery has reached the end of its life. If you have a MacBook with the removable battery you can get a new third party battery fairly cheap on eBay.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12   &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12   &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
  Or for $129 from Apple http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

Similar Messages

  • Will not reboot?  screen has a lite glow but will not reboot?

    My phone will not Re -Boot?  The screen has a light glow to it and I can hold down the power switch.  After 30 seconds or so, the screen goes blank - that's it? 

    Make sure you are connected to power (ie not running off battery).
    If you still have the black screen and can't get your Mac Book Air to turn off hold the power button until it shuts off.
    Try a normal power on and if you get the same issue try a safe power on by holding the shift key during boot up.  If you can't do a safe boot up try doing a recovery boot by holding the command key + R key during boot up and run disk repair.
    If you are still having issues contact Apple for service.

  • My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    1. verify on another Mac first. and another port.
    2. very likely dead SATA card
    read about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

  • My I phone has plenty of storage but will  not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original  form with the price or free on the right hand side.

    My I phone has plenty of storage but will  not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original  form with the price or free on the right hand side.

    Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
    Good luck.

  • My MBP will not lot start up. It chimes on but will not load up the OS. Any Ideas on how to reboot, btw i do not have the OS Disc.

    My MBP will not lot start up. It chimes on but will not load up the OS. Any Ideas on how to reboot, btw i do not have the OS Disc.

    The System DVDs that originally came w/your MBP has the troubleshooting tools.  Suggest that you find them.
    Do you have any 3rd party utility DVDs?  If so, they may work.  DW would be your best choice.  Does wonders.
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.

  • My iPhone 4 is turning itself off after 40% battery life is surpassed.

    Although I still have about 40% charge on the battery, the iPhone just turns itself off, like it has no battery life at all but when i plug it into the charger, it starts up again automatically and shows that I still have about 40-45% battery life available.  What is going on?  How do I try to recalibrate it if I can never get it to 0% battery life?  Please help.

    Same case here, but mine is Iphone 3GS having 40-50% battery then a little moment boom, it shut itself off. How to fix this someone help.

  • Superdrive has full DVD function but will not burn or recognize CD's

    OK folks here goes... When I bought the machine it came with a combo-drive (it was new on a close-out deal, G5's had just come out) and I promptly purchased a Pioneer DVR-105, installed it in the top bay and moved the combo to the bottom. The bottom never burned anything (read CD's & music CD's fine) but that was OK the top was great burned and read everything.
    I had lost all burning function through 10.4.* so I replaced the drive with a Pioneer DVR-112D and regained sporadic burning and reading function, of CD's and DVD's, and the bottom bay was unrecognized.
    Fast forward to 10.5 the DVR-112D, recognizes, reads & writes DVD's (haven't tried the DL's yet) but will not read or write CD's or music CD's burned or otherwise. It sounds like it is trying to read and after a long while spits the tray out.
    System profiler seems to recognize and bless the drive with the full litany of burning capabilities, and I'm at a loss. I recently put the DVR-105 back in the bay and it was working in the same capacity. I switched back because the 112 is much more capable.
    Any suggestions or ideas would be greatly appreciated.
    Thanks............. Perry

    Hussein (New York) wrote:
    When you moved the original drive to the lower bay, you must change the drive jumper from Master to Slave, failing to do so will likely render the drive unusable as the system cannot "see" it. Try reset the jumper on the back of the drive, and perhaps you can use that for CD's..
    Like Perryb, I want to install a Pioneer DVD superdrive into my G4 (in my case a 115D) and was going to place it in the Zip drive bay. Thus two questions:
    1 Can the new drive be placed as the lower drive or do I have to move the combo drive down and place it as the upper drive?
    2 If I do move the combo down, where can I find the information about resetting the jumper from master to slave? (The profiler identifes the ATA drives as Combo = 0 and Zip = 1)
    3 Do I have to set anything on the new superdrive before installation?
    Thanks,
    George

  • Our service upgraded to 4g but now my Mac computer will not join the network, It sees the network but will not join

    Our service just upgraded to 4g. Now my Mac computer will not join the network. It "sees" the network but will not "join"

        Hi Hojo38,
    That's not good! What happens when you attempt to make the connection? Do you receive an error message? What device is the computer making a connection to? Send details please.
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • 2 day old iphone 5s turns off at 95% battery life and will not turn back on. HELP

    So I had an iphone 4s for two years, the battery started to not last as long, so with my upgrade I got the iphone 5s (greatttt). Anyways I had it for a month then all of a sudden I wasn't getting calls, it took over a minute for me to even get a call to send, then once I was on the call others couldn't hear me well, then it would drop (no problems with service, always happened with full bars).  Brought it to Apple store, they told me it was a combination between the phone and my SIM card.  They gave me a new one and recommended I go to verizon to get a new SIM card.  That same day literally 3 hours later, the phone turned off randomly at 65% battery and WOULD NOT turn back on.  I had to go back to the apple store, they restored my phone and almost gave me another new one. However they tested the battery and everything and came to the conclusion it was okay and that I needed to restore the phone and set it up as if I did not already have an iphone (not use icloud to bring EVERYTHING over) So we did that and it started to work, that was two days ago.  Over the course of the last two days I have SLOWLY downloaded my previous APPS, however the only way to download those are to do it from the "cloud" because apparently I can't just get them from the app store.  Well yesterday I got the blue screen of death, however it came back, I thought nothing except that it was over worked.  Tonight it went down to 1%, I left it on the charger until it was at 96%.  I had NO APPS open. Went to my calendar and added a event for tomorrow, put my phone down and then ten minutes later looked at it and its turned off.  It will not turn on, I tried rebooting pressing both buttons, Ive plugged it back it, switched outlets, switched cords, NOTHING.
    Of course I wish I never got the iphone 5s at this point.
    What now?
    Back to Apple again?

    Yep.
    Just like cars, you lucked on a lemon.

  • My ipad has sort of frozen but will not turn off by pressing and holding the sleep/wake button

    my daughters i pad has sort of frozen. She can lock it and unlock it.  All it is showing is her wallpaper.  All her apps have disappeared.
    We cannot restart it as per the apple support troubleshooting assistant as it will not turn off.  Help

    Have you tried to hold down the sleep and home keys for about 20 seconds or so, until you see a silver apple. See if you can get it to reboot.

  • My 3GS turned off with a low battery, and now will not turn on

    I have charged it fully, tried hard restarting, tried plugging it into my computer, tried pressing the home button while plugging it into the computer etc.
    My question is really about how to contact apple in regards to getting it fixed. This is a replacement phone and it did not come with a warranty (or more accurately, I was too late to renew the old warranty when I got it). However if it had come with a warranty, it would have been within the warranty period (8 months). To me this gives an implied warranty on workmanship and parts. I live in regional Australia which makes going into my local apple store a little difficult, and I don't want to have to pay for tech support for them to tell me that I should try restarting it.
    End rant.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IBook G3 800 GHz will work on battery power but will not turn on with AC pl

    This iBook will function with a battery, but when the AC is plugged in it does nothing. It will not turn on. Is this a logic board problem or maybe a short or something not connected inside for the AC plug?

    It's a rather complicated repair:
    http://www.ifixit.com/Guide/Repair/iBook-G3-12-Inch-DC-In-Board/134/1
    Apple doesn't consider it a do-it-yourself job.
    Expect to pay $115-$145 for the repair (plus shipping if you have to send it away). The iBook may not be worth the repair, so some people are trying to do it themselves.

  • I have a ipod touch 8gb when i plug it in to charge it just blinks from the apple screen to the battery screen but will not charge what could be wrong it was fine yesterday?

    I have a ipod touch 8gb . When I plug it in to charge it just blinks from the apple screen to the battery screen what could be wrong?

    Maybe:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS3212 im trying to reinstall but will not allow, due to an error 7,  itunes helper not installed correctly,i have tried several times, but will not allow me to install, i have used itunes for years but now cant use it, can you help

    i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Phone will not turn on after installing new updates?, phone will not turn on after installing new updates?

    my iphone asked if i wanted to update it. i selected yes.. then about 10 mins later it shut off. thats been 3 hours ago and now it wont turn on. ive only had it for a week. what do i do??
    ive tried charging it and i pluged it in to my computer.. i help down the power button. nothing seems to work.

    1. Charge with the AC adapotor for at least 30 minutes.
    2. Reset the phone: press both the home and power buttons for up t0 1 minutes, releasing when the Apple logo appears

Maybe you are looking for

  • To get the list of queries in which a particular variable is used - urgent

    Hi Friends, I have a list of variables which were used in some queries, now I need to know list of queries in which the given variable is used. for example: There is a variable called ZVBASMNT and used in some queries, I want to get the names of the

  • How can I get the position assigned to the user in CRM .

    Hi all , How can we get the positions to which a  user is assigned as a holder in CRM . Thanks , Naval bhatt .

  • Freight units / Deliveries with zero quantities in TPVS

    Hi Gurus, we are prototyping TPVS  optimizer but facing one problem of zero quantity for freight units in Transfer orders  to OLTP / OLTP generation of deliveries. Reason in the log says requested quantity not completely available but there is plenty

  • Functional Flow of po-ap-inv-gl

    Hi all, I want functional flow of PO, AP, INV AND GL modules. Thanks in advance, --Narendra                                                                                                                                                               

  • Extremely high outbound byte retransmission ratio: 51.7637%

    Hi We have one V490,working as a weblogic server with NFS client. From last few days we are facing some performance issue in weblogic application. When we do netstat -s it shows high tcpRetransBytes / tcpOutDataBytes Sometime it is 50%....40 % or 100