My iPhone will not charge and will only turn on when plugged into adapter.

I have tried to reset and nothing. It turns off if I unplug it and will only turn on when plugged in. The charge has not moved above 19% even though I let it charge for 3 hours while I was out. What do I do?

http://support.apple.com/kb/TS2802

Similar Messages

  • I replaced battery and now will only turn on when plugged into a charger..

    I replaced my batter on my iphone 3gs and then it will only turn on when i connect it to a power source.
    After it has turned on you can take it off charge and it will stay on...
    Help please!! thanks

    Either you got a bad battery, didn't install it correctly, did some other damage while installing, or haven't let it charge enough yet. There's really nothing we can do to help you with any of those scenarios.
    Regards.

  • My ipod nano 6th gen will only turn on when plugged into a power source.

    My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions? 

    Howdy mela1223,
    If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer. 
    Restoring iPod to factory settings - Apple Support
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage. 
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IPhone only turns on when plugged into wall

    Hello, I have an iPhone 4 CDMA and it only works when in is plugged into the wall.  It does not work properly anyother time.  When I plug it into the computer it goes through the Boot Loop.  When I put it into DFU mode and recovery mode and try to restore it in iTunes it doesn't restore and just gives me a bunch of different error codes.  The most common error codes are 2001, 2006, or 1604.  It use to give me Error 21 but I fixed that by editing the hosts files.  I have tried six different computers and seven different iPhone cables on the computers and I still get the same error codes every time.  It does not work if it is not plugged in.  I have replaced the dock connector/charging port and the battery.  I bought it used and think it may have been jailbroken at on time.  It has not been jailbroken in the time I have had it.  I have also tried Tinyumbrella and that did not work.  What could be wrong with it? 

    Hello! When it turns off, do you notice if it drains quickly or does it just shut off even with full battery? Because this can also be caused by battery problems. Your iPhone may not be turning on even when plugged into a computer because a wall outlet charger gives off more power than a computer does.
    I suggest you bring your phone to an Apple store right away. They could at least help you determine the problem, and by then, you can decide what to do with your iPhone - you can have it repaired (if they say it's still fixable), you can have it replaced with a refurbished iPhone, or you can buy a new phone completely.

  • Ipod classic 160gb will only turn on when plugged in

    i recently got a ipod classic from a friend of mine who has no use for it and i knew there was something wrong with it but its confusing. the ipod will turn on if plugged in but will go to chatging please wait screen and never charge. if you put ipod in disk mode you can restore it but it will just go back to "charging please wait" after its done. i have no way of getting a new battery nor do i think i need to. i have tried all the the options there are , oh and i also have yet to see an apple logo and it turns off if i unplug it.

    Sounds like a dead battery.  You can have Apple replace it for a flat fee plus shipping and handling, or you can send it into a third party service center who can do the same job for a little less.
    Google for third party repair centers.
    B-rock

  • How do I restore my iPod Touch that only turns on when plugged into the wall?

    I found my old iPod Touch 4th generation in my backpack, and my backpack went through the wash, (It shouldn't of been too bad since it was in the side pocket) but it goes dead instantly as soon as I take it out of the wall charger, and it does not turn on when I plug it into my computer. It also has a pass, (That I forget) so I need to restore it. Is it possible to restore it without connecting it to a computer?

    No. You have to connect the iPod to a computer with iTunes to restore the iPod.
    Did you throughly dry the iPod before you started try to use it?
    If not try by
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.

  • HT1476 my iphone is not charging and i have tried different outlets adapters and cords also it is dead so i can not turn it back on to do anything and i need help soon so what should i do

    My iphone is not charging and i have tried different outlets adapters and cords and it is dead so no one say anything about going to settings or anything like that

    Take it to an Apple Store genius bar

  • Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    iPhone: No sound or distorted sound from speaker

  • IPod classic won't turn off when plugged into a home theater dock; what's up? will it hurt to leave it on all the time?

    I bought a new iPod Classic and it won't turn off when plugged into a home theater dock. Is this normal and will it hurt the iPod if i leave it on all the time?

    Hi there,
    How old is your Classic? Often, after a couple of years, rechargable batteries begin to fail, especially after such a long period of inactivity. This happens with any gadget with this type of battery.
    Try leaving it plugged in for 24 hours, and try again, to rule out that it isn't just really low on charge. If this doesn't help, it may be a good time to buy a replacement. New iPod Nanos and Touches will be released this October.
    Below, I've linked to an Apple website which explains rechargable batteries, and why yours may not be working.
    Apple - Batteries
    I hope this helps, and I hope upgrading your device will not feel like an unnecessary expense. Let me know if you have any more questions,
    Nathan

  • I can't turn on my MacBook Air despite trying to hold down the power button and using the SMC method. BTW my battery charger lights up to a green when plugged into the laptop.

    I can't turn on my MacBook Air despite trying to hold down the power button and using the SMC method. BTW my battery charger lights up to a green when plugged into the laptop.

    Hello cass528,
    I would be concerned too if my MacBook Air would not power on.  I recommend following the steps in this article when experiencing an issue like this:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My ipod is stuck on do not disconnect, and it won't respond when plugged in to imac or wall.  Is there a way to restart it without using the computer?

    My ipod is stuck on do not disconnect, and it won't respond when plugged in to imac or wall.  Is there a way to restart it without using the computer?

    You can reset your iPod with these instructions:  http://support.apple.com/kb/HT1320

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • Only turns on when plugged in

    i pod touch only turns on when plugged in and when you go turn it off the volume goes to the limit then you get to swipe for power off

    I have the same problem. And my battery is %61 healthy. Today it started to shut down automatically when I unplug the powercord. I don't know what to do. I tried everything like PRAM, PMU etc. But no change. The battery is now fully charged. But whenever it is unplugged from the powercord it shuts down. Please help!

Maybe you are looking for

  • I Cant Repair/Uninstall iTunes On My Windows 7

    Hi There! Can Someone Help Me Regarding My iTunes? When I Try To Open It, It Doesn't Work. Even If I Try Repairing/Uninstalling it. It Just Hangs. Can Some Help Me, Please? I Just Really Wanna Fix My iTunes.

  • Synchronous Send in BPM restartable?

    I have a XI scenario with BPM, in the BPM, there is a Synchronous send (calling BAPI in another R/3 system - RFC receiver adapter), the problem is: in case of failure due to target system unavailale, my scenario fails (Sync send fails - while calling

  • Internal table one page to another?

    Hi, shall we transfer internal table data of one page into another page? I am passing the variables, but interal table data is not shown? Is there any procedure to send data from obe page to another page? Thanks & Regards, Dhanunjay

  • Require Operation Increment fiels as optional in ca02(Routing change)

    Dear Friends, I have a business requiremnt for which i require *Operation Increment(plpod-vintv)*  field as optional  instead of mandatory . This field come at the time of changing Routing in CA02 while assigning the reference operation set to materi

  • Time synchronization on client device

    Is there any functionality in OLite 10g R2 which can maintain time synchronization on client devices (WM5 PPCs)? Obviously we could use some special application for such purpose, but it would probably need some user interaction, which we'd like to av