My iPhone will not pair with Yada Bluetooth speakerphone

My iPhone 5 (iOS 8.1.1) will not pair with a Yada Bluetooth car speakerphone. (Android phone has no problem.) Is there a fix?
Thanks

Hello grassyknap,
For most issues with pairing your iPhone with a Bluetooth device like your car, then take a look at the article below to sort you out. Make sure to reset network settings to clear it out from your frequent pairings to reestablish the connection. 
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/en-us/TS4562
Regards,
-Norm G. 

Similar Messages

  • HT2188 my iPhone will not pair with my bluetooth even though it finds it available? any ideas?

    My iPhone will not pair with any of my bluetooth devices even though it recognizes them.  any ideas?

    iPhone supports a limited Bluetooth profile
    Check this list and your other Bluetooth devices
    iOS: Supported Bluetooth profiles

  • IPhone 4s will not pair with car bluetooth

    My new iphone 4s will not pair with the bluetooth in my 07 Volvo XC70. The blue tooth is after market, looks similar to internet photos of Motorolla T605. Blue tooth says to put in scan mode and then enter code when prompted. Pairing fails and then the screen for the code shows up on the phone.
    I had a iPhone 3s paired with this Bluetooth, and once when I did a reset of that phone had this issue, put through many attempts it eventually paired. Despite many attempts, I cannot get the 4S running IOS 5 to pair.
    The phone does pair with a motorolla bluetooth ear piece.

    I've been having this issue since I got an iPhone 4S last week.  (Upgraded from iPhone 4 on iOS 5.0.1)
    I would think that this is a software issue but I went ahead and visited an AT&T store to see about a replacement phone.  I was directed to go to an Apple store which I then did.  I explained this bluetooth issue I was having as well as the other issue with no audio on outbound calls (described in a different thread) and they gave me a new phone.
    Well, I've tested it several times now with the nav/handsfree systems in two different cars as well as with my headset.  All is good so far!  No drop of bluetooth connection, can switch at will between audio sources and no lack of audio on outbound calls any more.  (And these problems were happening frequently before, even after a complete restore.)

  • MacBook Pro will not pair with any Bluetooth device

    Last night my MacBook Pro stopped pairing with any bluetooth device (I've tried Apple Pro Wireless Keyboard, Wireless Mighty Mouse, Logitech MX900 mouse, Apple Aluminum Wireless Keyboard) and it simply won't pair with anything.
    It sees each device but when it tries to pair it fails. With the keyboards, sometimes it'll give me the passkey to type on the keyboard but then it doesn't recognize that I've actually typed it and hit enter. Eventually I just end up with:
    "The pairing attempt was unsuccessful. Make sure your keyboard is in range of this computer, turned on and "discoverable." When ready, click Continue to try again."
    I've reinstalled 10.5.6 Combo update, tried to pair under a different user account, turned off/on bluetooth, and still nothing.
    I did install VMWare Fusion last night and briefly shared the Bluetooth connection to that, so I'm not sure if that has anything to do with it or not.
    Any suggestions?

    Me too. sigh
    All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
    Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
    Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
    One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
    Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
    Puzzled and frustrated,
    :ian

  • My iPhone will not pair with any devices on bluetooth, help?

    I can't seem to pair my iPhone 4 with any other phones or devices.

    PAISLEYSAINT
    I have a THB Bury car phone cradle specific to the iPhone 4 which was working fine until I updated to iOS 5.1.1 - my phone will no longer pair with it or recognise it or any other Bluetooth device !
    I carried out a full reset and relaunched the phone as if it were new - no success
    I took the phone to the appple store and one of the Geniuses looked at it for me. He told me it was not designed to 'discover' other BT devices after he paired it with his MacBook but could not pair the devices in the opposite direction - i.e my phone to the MacBook. I thought this strange that the premier smart phone on the market should not have this function especially when it previously worked well.
    He also carried out a full reset which is deeper than the one you can do at home - no success.
    The genius would not accept that this was a fault and claimed not to be aware of any issues but offered to have it repaired for around £116 !!!
    Incidentally my phone is just outside its  warranty and his phone would not pair up either when I asked him to check.
    THis is useless to me !! I understand Apple don't want to support BT function that allows it customers to send files between devices but come on ! My £90 BT car cradle kit is now useless and cannot be paired via my iPhone.
    I now really have to consider using a smart phone that will work.
    I love apple stuff and currently own no less than four different devices and was considering a new mac but not now. I feel let down by apple.
    DIssapointed !:-(
    iPhone 4, iOS 5.1.1
    I have this question too (0)
    Reply
    Categories: Wi-Fi, 3G and Bluetooth Tags: none (add)

  • Remote app on iPod touch and iPhone will not pair with Apple TV

    I have an iphone 3G and ipod touch with the remote app installed. I am unable to pair either with my ATV. When I go to remotes on my ATV and remote app on either ipod or iphone there does not appear to be an option to control apple tv.

    System Requirements for Remote (Apple TV)
    iPhone or iPod touch with software version 2.0 or later
    Apple TV with software version 2.1 or later*
    * iPhone or iPod touch software version 3.0 or later and Apple TV software version 2.4 or later are required for the directional remote feature
    Here's how it works: About Remote for iPhone and iPod touch, http://support.apple.com/kb/HT1947

  • My new iPhone 5 will not pair with the Bluetooth in my 2008 Prius. I see that I'm not alone. Will there be a fix for this problem ?

    Will there be a fix for the Bluetooth problems that me and many other iPhone 5 owners are experiencing?

    Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").

  • My iPad and iPhone will not pair with my iMac.

    Having trouble pairing iMac with iPad and iPhone....iMac is late 2013. Does anyone have any suggestions...Thanks.

    Bluetooth Pairing is not available, apart from Airdrop.

  • HT204387 iphone will not pair with my computor ?

    Cannot pair iphone with computor it get to passcode I push pair and it fails

    There are specific apps in the iTunes App Store for using an iPhone as a remote control. These apps do not use Bluetooth, they use wi-fi.

  • IPhone 4 Bluetooth will not pair with Jawbone Icon,  Jawbone 2

    Just got my iPhone today and am more or less thrilled to have it. The only problem (other than the antenna issue, which the bumper fixes beautifully) is that Bluetooth will not pair with any of my Bluetooth devices. When I turn on Bluetooth on the phone and turn on the headset, iPhone says it's "searching.." and "now discoverable" but it never discovers anything, let alone pair up. The Bluetooth on my MacBook recognized the iPhone and I was able to pair them, but no luck on the Jawbones. Sounds like a JB problem, but I'm wondering if anyone has had this problem and if there's a fix via the iPhone.

    On the icon, turn it off and hold button down while sliding the power switch on. This should put it in pairing mode. Then go into your i4's bluetooth menu and give it another go. Also, Jawbone has recently updated the firmware for the Icon so you need to load it as well. I have the icon and a Jabra cruiser and both work/paired fine. You may want to try rebooting phone and retrying as well.

  • My iPhone 6 plus will not pair with my macbook air 2014

    My iPhone 6 plus gives a message unsuccessful not supported when I try and pair with my macbook air.
    both are running up to date iOS and OS X.

    An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • IPhone 5 will not pair with Uconncect since 8.1.1 update

    iPhone 5 will not pair with Uconnect since 8.1.1 update.  How can I fix this?

    Apple would "not" replace my Iphone 5 till went to dealer and had my bluetooth on u connect system updated. Advisor acted like I just come from the planet Mars when I told him what I needed. So a tech advisor went with to my vehicle and connect his 4S then went and about a minute flat "paired" my iphone 5! I seen him go through a step that even the manufacter's manual did not even mention to "pair" an iphone using bluetooth! I then asked what he had done and so he showed me to successfully start the "pairing" process the four digit code he used for the u connect and on the iphone screen came up displaying u connect and just to the right it says "not" paired. I had been there around twenty times myself! He then pressed the "not paired" display and when he did the keypad popped up and the advisor put in the "same" four didgit code that he originally had used to start the pairing in uconnect and then press the "complete or done" button on the iphone keypad after doing this the u connect displays "pairing process has begun" and less than a minute it did! All the phones including my 4GS I "never" had to do that and I had "never" had a pairing problem before so to me it must the new IOS 6 system!

  • 525G2 will not pair with one of my Bluetooth headsets

    My Voyager Pro+ died last week and now my 525G2 will not pair with a Voyager Pro UC that I had laying around.  It can see it, but when I enter the PIN code it says that it will not pair.  The same headset will pair with my cell phone, so i know it's not the headset that is the problem.

    What is an "expense bluetooth". Does it have a brand name and model number? is it compatible with the iPhone? Have you put it in pairing mode and paired it with the iPhone? Has it ever been paired with another device?

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any solutions?

    Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any suggestions please?

    Yes, it did.  I have not had any problem with my iPad pairing, just the iPhone.  Thank you
    Pam

Maybe you are looking for

  • My ipod touch is no longer syncing with itunes

    not used the ipod for a while and wanted to update it last night. i changed the manual drag to tick as wanted all the recents downloads on the ipod. took nearly 3 hours for 270 songs to transfer. when finished i went to play a song but it had not tra

  • SICF service unable to use Global Settings for System Logon configuration

    Hi, I've create a bespoke Web Dynpro application, and have changed the appearance of the login screen. (Within transaction SICF, select the service, then choose Error Pages, System Login, Configuration). When I modify the settings using "Define Servi

  • JavaFX connection with oracle

    Hello, Im new in JavaFX, and i have to build a projet with it for my study's... i got lot of problems How can i connect JavaFX components(dataGrid, textarea, label...) with my oracle database like persistance in noraml Java. im working with netbeans

  • Changing External Editor from Photoshop CS to CS5

    I've looked through the preferences pane but for the life of me can't figure out how to get iPhoto to switch its external editor from CS to CS5. Does anyone here have any idea? TIA!

  • Date Validation in Prompt

    Hi All, Can anyone please provide me the Date validation in Calendar prompt. Regards