My iphone will not power on - when plugged in the battery will display, but it does not charge
My iphone ran out of battery a few days ago, and now it will not charge back up. Its been plugged in for over a day, when the home button is pressed it displays a battery with 3 small red bars. I was able to get it into recovery mode and restore factory settings - but this did not solve the problem! it is still not turning on. I have tried changing chargers etc. already and i believe it is a problem with the phone. please help!
Could be a battery problem. You'll have to visit an Authorized Apple Service Provider to Apple Store to get it checked for hardware issues.
iPhone - Contact Support - Apple Support
Similar Messages
-
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
Itunes does not open. When I click on itunes it jumps ones and does not open in macbookpro
itunes does not open. When I click on itunes it jumps ones and does not open in macbookpro.NEED AN ANSWER NOW!!!
Hey sebasac,
Thanks for the question. I understand you are experiencing issues with iTunes on a Mac. Let’s see if we can isolate this issue by starting iTunes in safe mode:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
There are several ways in which an add-on can cause iTunes to act erratically, such as those listed below:
- Loss of iTunes functionality, such as the Visualizer.
- Distortion or irregularity in the iTunes interface.
- Slow performance.
- iTunes won't open or quits unexpectedly.
- You see an alert while syncing stating "... cannot be synced. A duplicate file name was specified."
If you notice any of the above symptoms or other unusual behavior, you can disable any plug-ins not manufactured by Apple by opening iTunes in Safe Mode. This is done by holding down the Option and Command keys (on Mac OS X) or holding down the Shift and Control keys (on Windows) while opening iTunes. If performed correctly, you should see the following dialog before iTunes finishes starting up:
"iTunes is running in Safe Mode. Visual plug-ins you have installed have been temporarily disabled."
If the above does not resolve your issue, I’d like to isolate further by testing in another user account:
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Symptoms
When isolating issues and/or troubleshooting software issues in OS X, you might want to use a different user account. Learn how to use this technique to narrow down the cause of an issue.
Resolution
The issue at hand may simply be caused by a bad preference setting or user-specific data file. With proper isolation, you can avoid time-consuming and inappropriate troubleshooting methods.
Thanks,
Matt M. -
My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.
By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position! -
Hello! I cannot download applications, when I try to do it the application says "waiting" but it does not continue downloading! Can someone help me????
Download only one application at a time.
Click all downloading applications until they all say "Paused". Then click one at a time, let it complete downloading, then click the next and repeat. -
The cumulative balance displayed in FS10N does not match the sum of the det
Hello,
The cumulative balance displayed in FS10N does not match the sum of the details. For example, we have a GL disbursement account that has a ***. Balance of 8 million. The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million. According to our users, the 2 balances should equal. I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it? I'm not sure how f.16 functions. Do we have to run it for each consecutive year? I'm not a FI specialist. I'm responsible for data archiving and the users think it's related to archiving. However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
Thank you very much in advance,
LourdesHello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi -
Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!
Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness. -
Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?
Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.
-
internet Download Manager cannot integration with firefox4 its Look in the menus it works but it does not actually work
IDM may need to be updated to work with Firefox 4.0. You could contact them and make them aware of the problems you are having with their program.
-
I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!
Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?
For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI -
Where do i find the serial No on a IMac 4.1 please? I have looked on the "about this Mac" but it does not have the serial No on it!
Until last July, the model identifier on every Intel Mac would tell you exact minimum and maximum expansion in terms of RAM, retail operating system, and any system specific required firmware updates, video and audio expansion capabilities, and patches for Wifi available. The serial number is only of consequence if you wish to date a Mac down to the week. This can help in determining system specific disks, available warranty, and exchange/repair program eligibility. Outside of that the year and month can usually be narrowed down to a six month period with model identifier alone on all except MacPros. So my question is, is it really that relevant for your needs?
-
I changed ISP and used ms explorer to set up on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP address. Can find no way to set firefox to new ISP address. How do I do it? edit
-> Tap ALT key or press F10 to show the Menu Bar
-> go to Tools Menu -> Options -> Advanced -> Network -> Connection section -> click '''Settings...''' button -> change these settings in accordance with Internet Options settings that work on MS Internet Explorer -> click OK
Check and tell if its working. -
Macbook pro 2012 Auto power up when plugged in (Dead battery)
My MBP 2012 automatically power up when plugged in. (I havn't changed any settings regarding the power and I have double checked it and confirmed)
My battery went dead before 3 weeks for no reason and stopped charging at 21%, but still the battery condition is displyed as normal.
Do I have to replace the battery with a new one and will it solve the problems. (Auto power up and charging issue) ???
PS: The warrenty is over and I don't have apple care either.
please check the infomation bellow:-
Battery Information:
Model Information:
Serial Number: W02XXXXXXX
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 165
Charge Information:
Charge Remaining (mAh): 1006
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4718
Health Information:
Cycle Count: 175
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11263
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Nofirst I have tried SMC reset and PRAM reset.
Unfoatunatly now I can't do them bcoz the computer powers up automatically when I plugged in.
PS: I have tried another adopted and still it's the same -
I have over 300 photos and 87 videos. When I recharge the battery I am geting the message to buy more storage to because not enough icloud space. So I did yesterday. That went ok, but the new message tells me it will take 83 hours. Perplexed I went thru the settings and turned off apps and their data that I didn't realize where on. Now I'm not sure if I needed to purchase more storage but it is still taking forever to complete the task. Am I on the right track with this, meaning will take forever to store all my photos or what ? The only other item I have on to store is contacts. Can you assist me ? Thanks - emoslim
Welcome to the Apple Community.
The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps.
Maybe you are looking for
-
Can anyone help me? Suddenly (i.e. just a few minutes ago) this problem has appeared. I attempted to update two apps on my iPad. The Terms and Conditions agreement comes up, I read the terms and conditions, I agree to them, I click AGREE, it disap
-
Switching music library to new hard drive
Hi. I recently bought a new external hard drive and transferred all of my music onto it from my old external hard drive. I'd like to change the music folder location to the new hard drive. My question is this: if I change it to the new hard drive, wi
-
Failed to install CM Client on computers located in untrusted site
Hello, I deploy System Center 2012 SP1 Configuration Manager and successfully push client to Desktops/Servers, I read in TechNet that this scenario is supported: "The client is on a domain computer that does not have a two-way forest trust with the s
-
Why won't the Camera and Photos apps work? I can't access my photos or take new ones.
I can no longer take new photos, or access my camera roll or photo stream from within the camera or photos apps. Several days ago I took an HDR photo and the phone became unresponsive on the "saving" dialog with the progress loop rolling. After 15 mi
-
Transaction code for product master - SNP
What is the significance of CFM2 transaction and EXIT_SAPLCMAT_001 user exit.