My iphone will not ring with an incoming call or an incoming text

My iphone will not ring with an incoming call or an incoming text

Hello tmacmillin,
Thank you for the question.  It sounds like there is no sound with an incoming phone call or text.  Have you checked to see if Do Not Disturb was accidentally enabled?  You will see a "moon" icon in the status bar if it is enabled.
You can disable Do Not Disturb in Settings > Do Not Disturb or in the Control Center as described in the following articles:
iOS: Using Do Not Disturb
http://support.apple.com/kb/HT5463
iOS: Understanding Control Center
http://support.apple.com/kb/HT5858
If you are not hearing any sound from your speakers, I suggest reviewing the following article:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?

    My iphone would not ring with incoming call despite ring tone was set up using sound setting.  In the beginning, it did ring. After a while it stops working.  Any idea to make it work again?

    Is the silent switch on the side of the iphone on?

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

  • HT1386 iphone will not sync with itunes the apple sign just keeps popping up

    iphone will not sync with itunes or ture on only with it on a charger but will only keep popping up the apple sign or on acation show iso6 on screen and say sync with conputer but as soon as i take it off yhe charger it wont do anything

    I followed the instructions in those 2 articles. Still not able to see the device in ITunes. I reinstalled the latest iTunes and all updates to my iMac (Mac OSX ver 10.6.8). I tried 3 different USB Cables in different USB ports. Rebooting both the Iphone and IMac. Still nothing seems to be working. I searched the discussion boards and I see other people with the same problem but they seem to run into the same problems finding a solution. I dont understand what happened because this was working properly up until 2 days ago. Do you have any more suggestions?

  • My iPhone will not sync with my mac iCalendar

    Some events on my iPhone will not sync with my mac iCalendar.  I need this because I print out the calendar as well as sync with my husband's schedule.  Help?

    just remove itunes via my control panel
    re-downloaded it, install it in a different dir (itunes-2)
    did nothing else, clicked on pref and it locked up

  • HT2188 my iPhone will not pair with my bluetooth even though it finds it available? any ideas?

    My iPhone will not pair with any of my bluetooth devices even though it recognizes them.  any ideas?

    iPhone supports a limited Bluetooth profile
    Check this list and your other Bluetooth devices
    iOS: Supported Bluetooth profiles

  • HT201436 my iphone will not ring

    my iphone will not ring, it is not on mute, the speakers work, i am using default ring tone.

    I would do a hard restart and then make sure you flip the Vibrate botton on and off on the side. If that does work i would reset to factory settings. If that does not work i would take it to a apple store, Good luck

  • My iphone will not ring

    my iphone will not ring its stuck on silent mode

    My iphone 4S stopped ringing today.  It is not on vibrate and all settings are correct--need help!

  • HT201401 My iphone will NOT unlock with my CORRECT passcode.

    My iphone will NOT unlock with my CORRECT passcode.  I can't even backup and restore on itunes because it's locked.  What can I do?  Does anyone have experience with this and know how to fix it?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My iPhone will not sync with latest itunes download

    My iPhone will not sync with latest itunes download

    just remove itunes via my control panel
    re-downloaded it, install it in a different dir (itunes-2)
    did nothing else, clicked on pref and it locked up

  • IPhone will not ring if locked even when Do Not Disturb is not on. Even when the sound toggle on the side is not red.  This problem occurs regardless of whether it I have Do not Disturb on (manually, or scheduled) or COMPLETELY OFF.

    iPhone will not ring if locked when when Do Not Disturb is not on and the phone is not on silent (button on side is not red).  This problem occurs regardless of whether it I have Do not Disturb on (manually, or scheduled) or COMPLETELY OFF.   I've tried wiping the phone and reinstalling from a saved copy but of course the problem comes back because the problem is inherent in the save.   There are two options under "Silence" at the bottom of the Do Not Disturb preferences.  "Always" or "Only when iPhone is locked".   Those are the only two options and I want neither.  No amount of deselecting will work.  It forces you to pick one.  
    Does anyone have a solution given that I've better explained the problem? 

    The settings at the bottom of the Do Not Disturb page do not matter if you have the switch for Manual turned to off, or the Scheduled turned to off.
    When the phone is unlocked, if you try to raise the volume of the ringer, what do you see on the screen? Does it say ringer, do you see the word headphones anywhere?

  • Iphone will not synch with itunes after downloading most recent itunes version

    I updated to most recent version of itunes and since then my 3GS iphone will not synch with itunes. the phone is recognized by my windows computer but not recognized within itunes. I redownloaded itunes and Q but nothing.  Can anyone help?

    I have a Dell XPS 8500 with a 64bit i5 Processor and an Apple 4s and I have the same problem.  I have been searching for days and can only get the phone recoginzed by disabling power to USB ports and there is no way I can get ITunes to show devices, so I can't see the IPhone.  People say Apple monitors these sites but I haven't seen any response from a technical person. Have you?  My hunch is they know about the problem but don't have a fix, and have other priorities for their team. If my hunch is correct, its quite extraordinay because I am close to selling my 4s and getting some phone which is easier to work with. Time is my scarcest resource and I have devoted way too much of it to this issue.

  • Replacement iPhone will not sync with existing library on external HD

    I had an iPhone, and all of my music is on an external hard drive. Everything synced and worked great, no problems. However, the Apple store just replaced my iPhone on a warranty issue, and now my iPhone will not sync with my itunes. Itunes and my external hard drive work great, but the minute i plug in my new replacement iPhone, it instantly crashes my external hard drive and will not sync any of my music. Ideas?

    Hi,
    The issue might be caused by the USB connection. Try directly connecting both devices to a high-speed USB2 port on the PC.
    This article: http://support.apple.com/kb/TS1286 provides additional USB troubleshooting tips.
    Also, make sure you have the latest version of iTunes installed on your PC.
    http://www.apple.com/itunes/download/
    -Jason

  • HT2305 my iphone will not sync with itunes

    my iphone will not sync with itunes

    To add to the above, I just upgraded my iTunes to 10.6.x to take advantage of iCloud.  It was working before.

  • TS3694 The apps on my iphone will not sync with iTunes.  Process just skips steps 3 and 5.  Any suggestions?

    The apps on my iphone will not sync with iTunes.  Process just skips steps 3 and 5.  Any suggestions

    Are you signed into iTunes on the computer with the same Apple ID the apps in question were "purchased" with?  Is the computer authorized for that account?

Maybe you are looking for

  • How to "clean" my Macbook Pro

    Hi, I'm interested in completely cleaning my Macbook Pro. I've no idea where to start so let me begin by detailing what's going on: Some specs on the machine fist: Processor 2.4GHz Intel Core 2 Duo Memory 4GB 1067 MHz DDR3 Startup Disk Macintosh HD.

  • Watch a rented movie once, then can't watch it again within the 48 hrs

    This doesn't seem right. I paid for a rental and downloaded a movie. I could start watching within about a minute, it played without skipping a beat. My wife started watching the movie the next night and got about half way through. The next day, she

  • Spinning wheel of death when try to sync itunes with ipod

    I've had no bother from syncing my ipod until today and then for no reason I now keep getting the spinning wheel of death. When my ipod is connected and on auto sync mode it gets recognised, says it's syncing and then totally freezes. The only way to

  • Why does CS6 quit when opening CS4 docs in InDesign?

    We just downloaded InDesign, Illustrator, Acrobat and Photoshop in Creative Cloud. But when opening InDesign docs made in CS4 the CS6 version immediately crashes. But when reopening the document is there, but nonamed and not with all links remained.

  • Com.sapportals.wcm.rendering.readymades.*:

    Dear all, Can some one please point out the jar file which has the package com.sapportals.wcm.rendering.readymades.*. I found wcmrendering and wcmrenderingapi jars frpm PDK 6.2. But these two jars do not have the above package. I also searched EP6.4