My iphone will not ring

my iphone will not ring its stuck on silent mode

My iphone 4S stopped ringing today.  It is not on vibrate and all settings are correct--need help!

Similar Messages

  • HT201436 my iphone will not ring

    my iphone will not ring, it is not on mute, the speakers work, i am using default ring tone.

    I would do a hard restart and then make sure you flip the Vibrate botton on and off on the side. If that does work i would reset to factory settings. If that does not work i would take it to a apple store, Good luck

  • My iphone will not ring with an incoming call or an incoming text

    My iphone will not ring with an incoming call or an incoming text

    Hello tmacmillin,
    Thank you for the question.  It sounds like there is no sound with an incoming phone call or text.  Have you checked to see if Do Not Disturb was accidentally enabled?  You will see a "moon" icon in the status bar if it is enabled.
    You can disable Do Not Disturb in Settings > Do Not Disturb or in the Control Center as described in the following articles:
    iOS: Using Do Not Disturb
    http://support.apple.com/kb/HT5463
    iOS: Understanding Control Center
    http://support.apple.com/kb/HT5858
    If you are not hearing any sound from your speakers, I suggest reviewing the following article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPhone will not ring if locked even when Do Not Disturb is not on. Even when the sound toggle on the side is not red.  This problem occurs regardless of whether it I have Do not Disturb on (manually, or scheduled) or COMPLETELY OFF.

    iPhone will not ring if locked when when Do Not Disturb is not on and the phone is not on silent (button on side is not red).  This problem occurs regardless of whether it I have Do not Disturb on (manually, or scheduled) or COMPLETELY OFF.   I've tried wiping the phone and reinstalling from a saved copy but of course the problem comes back because the problem is inherent in the save.   There are two options under "Silence" at the bottom of the Do Not Disturb preferences.  "Always" or "Only when iPhone is locked".   Those are the only two options and I want neither.  No amount of deselecting will work.  It forces you to pick one.  
    Does anyone have a solution given that I've better explained the problem? 

    The settings at the bottom of the Do Not Disturb page do not matter if you have the switch for Manual turned to off, or the Scheduled turned to off.
    When the phone is unlocked, if you try to raise the volume of the ringer, what do you see on the screen? Does it say ringer, do you see the word headphones anywhere?

  • My iPhone will not ring when a call comes in. It goes straight to voicemail.

    What can I do when my iPhone does not ring, and just goes to voicemail?

    Call your wireless carrier.  I had the same issue once.  the problem was on their end.

  • My new iphone will not ring...

    while in auto-lock mode. silencing switch in correct position and vol all the way up. Rings fine when phone on

    I had exactly the same problem. Only soultion is to either wait for the next update, which may or may not fix the issue, or do like I did and take the iphone back to the AT&T store and pay the exchange fee of $30+ bucks and get a new iphone. You could also send it back to Apple to have them repair it. This simply cannot be fixed any other way.
    Sorry friend.... I was cursing Apple after my VERY FIRST experience with one of their $300+ gadgets.

  • My iphone will not ring, goes right to voicemail

    i have reset my iphone 4s 3 times now and once we reset and cleared the whole phone because I was not receiving calls.  it would go right to voicemail and the phone would not even show that a call came in.  I reset it again and it would ring for one call and the next right to voicemail.  Any suggestions?

    I have never heard of such a thing, so I don't know what they are meaning. Unless...is it perhaps that your Z10 is locked to a different carrier than you are attempting to use, and it's rejecting the SIM when you insert it? If so, that should present a message on screen though, and you've not said anything about that.
    You can check the locked status of your device via:
    Settings > Security and Privacy > SIM Card
    If the bottom three sections on that screen all say "Unlocked", then you are good to go on any compatible carrier (each specific model BB is compatible only with a subset of all carriers in the world, but I don't know what you have nor what your carrier requires).
    If any of those say locked, then that might be what this electronic repair person meant...you'd need an MEP code to unlock the device from it's originally manufactured-for carrier. You normally obtain that code from that original carrier, but each of them have their own rules about giving those out. Otherwise, you'd have to seek a fee-based service to provide the code (there are several on the Internet, and I have no recommendations for you).
    Anyway, with the information you've provided, those are my guesses...with more information we might be able to guess more accurately.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My iPhone will not ring when receiving calls

    After updating my iPhone with the 5.0 revision, my phone ceased to ring. All my settings seem to be proper and the ringer volume is set on top level.

    Same here for my husband and myself. If I figure this out I will let you know.

  • My iphone 4s will not ring for incoming calls...I've checked Do not Disturb, changed my ringtone to default and did a soft reset.  It will vibrate but not ring.  What can I do?

    My iphone will not ring when calls come in.  I have it set to ring and vibrate.  The Do not disturb is turned off and I have reset it but still it will not ring. What can I do?

    Check and see that the silent mode switch on the upper left side is toward the front of the iPhone and there is no orange or red showing.

  • Phone will not ring after ios update

    Since I recently updated my iPhone 5s to ios 8.0.2 i am having a problem where it will not ring when I get incoming calls. what can be done to fix this issue?

    Hi hobbs1977, 
    Welcome to the Apple Support Communities!
    I know it must be frustrating when you iPhone will not ring when you have an incoming call. The first thing I would suggest as far as troubleshooting would be to check the ring/vibrate switch on the side of your iPhone, just above the volume buttons, to make sure the ringer isn’t silenced. If the ringer is not silenced, continue to read over the information in the attached article to troubleshoot your iPhone sound. 
    iOS: Understanding sounds, ringtones, and alerts
    Have a great day, 
    Joe

  • My iPhone 5 will not ring when my phone number is called.

    Despite the "Silent" button on the side of the iPhone 5 being set to off, and the ringer turned on full blast, my iPhone 5 will not ring when any number calls my phone. This is not an issue with the settings, which are all set for the phone to ring. Has anyone else run into this problem, or may have a solution besides taking the phone in for repair? My phone is no longer covered under the one year limited manufacturer's warranty, so any repair is likely going to cost a minimum of almost $300.
    Thanks in advance for the help!

    MJT's iMac wrote:
    ... This is not an issue with the settings,...
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...

  • HT4623 Iphone 3gs will not ring

    My IPhone 3gs will not ring on incoming calls.  Rebooted phone, did hard reset and nothing works.  Volume is up and phone is set to ring.

    First check to see if you have your phone on slient if its not on slient then theres a problem. When you had jailbreaked your iphone it messed up your system and what I would suggest is that you go to a Apple store not AT&T but "Apple" and tell them your problem then they will replace your phone like they did to mine when my sound was not working as well. Hope this help :]
    -Travis

  • HT204321 my iphone 6 will not ring while locked

    my iphone 6 will not ring while locked , and the do not disturbed is not on

    Hi NANA5152,
    Thank you for using Apple Support Communities. 
    I understand that your iPhone is not ringing when it is locked. I would suggest the following for troubleshooting sound issues with your phone. 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Regards,
    Jeff D. 

  • HT5047 Have Apple Iphone 5C.  The phone vibrates but will not ring.  What do I do/

    Have Iphone 5c.  It vibrates, but will not ring.  Phone shows that the sound is all the way up.  Why will it not ring?

    I had the the no sound issue also on my iPhone.  I found this trick to solve the problem and it give back all sounds on any iPhone.
    1- Go to Settings
    2- General
    3- Scroll down to : Accessibility
    4- Select Assistive touch (for more information about Using AssistiveTouch on your iOS device : http://support.apple.com/kb/HT5587)
    5- If the "White dot" doesn't appear - Click 3 times to the home bottom and you should get the "White dot" somewhere on your iPhone sceen (you can move the "White dot" where you want on the screen of the iPhone)
    6- When you get the "White dot" - click on it
    7- You will have 4 icons, click on the device icon
    8- Click volume up (be sure the volume is at the maximum)
    9- Click on the little bell (make sure the bell is not muted - I found, it's not very clear whic bell is on or wich bell is mute)
    10- Call your iPhone - the problem of no sound should be fix (if the problem is not not fix be sure the volume is up and the bell is not muted - select the other bell by clicking on the bell -  call again your iPhone - the problem should be solve and it should work)
    11- If you do not like to keep the "White dot" on your iPhone screen - click 3 times to the home bottom and the "White dot" should disappear (if you want it back - click 3 times to the home bottom and the "White dot" should be back)
    I found this trick at :  http://www.iphonefaq.org/archives/972122 -  My iPhone ring/silent switch is stuck on mute, how can I turn on sound? - On the comments of " hi iphone users i have had " Submitted by jodray (on February 5, 2013 - 10:05am.
    Hoping it will work for you.   Best regards.

  • My new iphone 5 will not ring. have done soft reset and taken out the sim card and put it back in. very frustrating

    my new iphone 5 will not ring. have done soft reset and taken out the sim card and put it back in. very frustrating

    Did you check the side control and make sure it isn't on mute.  Up for ringer down for mute.

Maybe you are looking for

  • Can not display ImageIcon in a JLabel where you want in the code ???

    Hello, everybody. I need your help to solve a problem I am on it for 2 days now : In the constructor of my class, I have a lot of initializing methods. If I try to display an image (with ImageIcon in a JLabel) within one of these methods, there is no

  • More Creative Layout from Print Module?

    Hello, I am using LR 3.2 and am wondering if it is possible to make more creative layouts inside the print module? I would like to have a backgorund, maybe some drop shadows and also be able to rotate images by a few degrees like 15 degrees. This see

  • Adding Background to PDF: Using a source file in Saved Settings Adobe Acrobat 9 Pro...

    I frequently need to print purchase orders and use another PDF file as the background. There is an option to save a setting in the "Add Background" option, but when this is used neither the background nor the positioning is adjusted. Any help or tips

  • How to export deleted photos in Lr?

    I have a batch of photos that were imported in Lr, edited, and exported with a watermark. I then deleted the original file. Well, the pictures still show up in my photo strip in Lr, but it won't let me export it because it's saying the "file is missi

  • Installing Netgear Adapter

    Trying to confirm this, if my PB G4 recognizes a PCMCIA network card, then the device will show up in the Network Device list in System Preferences? I have plugged a card in, installed the software for it, and in Network the only things I see are the