My iPhone will not start after new software update. Freeze on apple screen

I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
wish I had waited.

Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

Similar Messages

Firefox will not start after a software update

After software installation Firefox will not start and displays a message box that says that it crashed and can't start

Installed latest Firefox v. 6 software.
Drop box saying that Firefox could not start and had to shut down upon start.
Yes, Firefox started with Shift and click of icon.
I uninstalled software, re-installed and it seems to be working fine.
Thank you for your help

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT4623 IPHONE WILL NOT SYNC AFTER NEW UPDATE.

After updating to the new iphone 7.0 update, my iphone will not sync in itunes, anyone had a similar experience ,if so what's the remedy?

I restarted the phone again and iTunes and it synced.

Aperture 3.6 will not start after new install

Rebuilt my Mac Mini with a clean install of Yosemite 10.10.2 and reinstalled all my apps. Downloaded and installed Aperture from the App Store but it will not start. No crash, just nothing. Does its animated thing when double-clicked in Finder, and goes through the usual launch action from Launchpad, but then nothing. No icon in the dock, does not appear (even momentarily) in Activity Monitor. I have Final Cut Express installed and have seen other launch issues with this combo, but they all seem to result in an Aperture crash. Any ideas?

Did you install Final Cut Express after you installed MacOS X? Then install Yosemite again on top of the current system, without reinstalling the applications. See: Aperture 3.x: Aperture unexpectedly quits if Final Cut Express 4 is installed
Aperture does not work after installing FCE, but if you reinstall MacOS X after installing FCE, both Aperture and Final Cut Express sgizld work.
The download of Aperture may be incomplete. If reinstalling the system does not solve this, trash Aperture and download again.

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Ipod touch will not sync after new itunes update

Ipod touch 4th generation will not sync after I updated the new itunes. Actually after I updated to the new itunes it deleted all my music from my ipod and refuses to reload. If someone could please help me that would be completely appreciated. I tried trying to sync each song individually but it didn't help (before it stopped syncing), then it stopped syncing, even though I have it hooked up it brings everything that I have on my ipod up but it won't do anything.

When I tried the first time it asked me if i wanted it to stop syncing and to restore. It gave the choices of yes and cancel, i didn't click either because the option box went away and it just stopped restoring on its own. I did the store again and now it is asking if i want to set up as a new ipod or to restore to Andrea's ipod. Should I set up as new?
Thank you Espeon for the article

Ipad will not start after problems with update to ios5

Hi all,
after some problems with update to ios 5 my ipad 2 will not start anymore...
in itunes it is not visible - So restore is not possible... :-(((
there are only "reboots" on the ipad screen...
thank you for help....

Nothing works...
It is still the same since 7 hours :
apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
and so on...
No chance to switch of the ipad...
No connection to itunes possible (Laptop and Dektop PC)
after several resets it's the same problem..........
ipad 2 | 32gb | WLan + GSM

Brand New 27" iMac i5 will not boot after installing software updates

I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
Any suggestions? A little frustrated here....

If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
Does this help you at all?

New IPhone is a Brick - after new Software Update

Last night I synced my new IPhone 3G that I got this past July after lining up for 2 hours. Love it! However, it's been turned into a brick.
I synced with iTunes 7, using the correct cable with no dock, and it mentioned that there is an update for the iPhone software (2.1). So, duh, I applied it.
When it was done, the phone was dark, so I started it and got the image of the usb cable and a iTunes image, and iTunes said:
"iTunes must check the iPhone software update server to identify this device..."
I clicked "check"
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes"
I clicked "ok" - then clicked "restore".
"Automatically checking for iTunes and iPhone updates is disabled. Would you like iTunes to check for a new iPhone software update?"
I clicked "check".
"Are you sure you want to restore the iPhone "iPhone" to his factory settings?...."
I clicked "Restore and Update"
"extracting software....preparing iPhone for restore...."
"the iPhone "iPhone" could not be restored. An unknown error occurred (13)."
TOAST
I loved this phone, and now it's a brick!
Will apple help?

I had a similiar issue last night when upgrading my just purchased iPhone to 2.01. Itunes downloaded the new update but during the install I received a message stating "the iPhone "iPhone" could not be restored. An unknown error occurred (6)." I tried this 4 times and got the same results. My iPhone had a dark screen with icons of a cable and itunes on it. Well I called apple support waited for 30 minutes to get to a techinican. After explaining my issue he put me on hold for another 15 minutes then I mysteriously was transfered to AT&T. I was hot to say the least. I WAS able to fix this on my own. I originally was using an imac with iTunes 7.71 on it. I had a PC laptop with iTunes 7.70 (not 7.71). I plugged the iPhone directly to the PC (Not a USB hub). I was successful with the upgrade doing this. I upgraded 2 other iPhones that day and received the error 6 code. But after a second try they went through. I think there is an issue with iTunes 7.71 causing the failures during updates. Try to get your hands on a copy of iTunes pre 7.71. And ensure you are connecting the phone directly to the computer.

IBook G4 will not restart after system software update

After updating the system software, via software update, the system will not get past the initial gray screen with the spinning dial.
This is my daugthers computer and she is out of town working and does not have any of the system disks with her.
Any suggestions are much appreciated.
Thank you!
iBook G4 Mac OS X (10.4.7)
Yikes! Mac OS X (10.4.3)

George
Boot your computer from the install DVD, insert the DVD and shutdown the computer. Boot up while holding down the C key. Just before the install sequence you will see options in the menubar, select utilites, go to disk utility, select your target disk, verify and repair disk. You might want to verify and repair disk permissions as well. To answer your question it's not a virus as there are no viruses for MacOSX. It could be the updates did not install properly. Try that and follow with a post to let us know if that worked for you. What software update were you running when this happened?
Joseph

Tiger does not start after failed software update

Hi,
I ran software update, to install updates for Tiger, 10.4.6. I got a prompt to shut the laptop down, and follow the instructions on startup of the laptop. I pressed the shut down button, I was then told by the instructions to hold down the power button until the white sleep indicator flashes, and the bar travels across the screen. I accidentally let go of the power button and it shut down halfway through the update (I cannot remember what the update was).
Now, when I press the power button, the screen stays blank (no flash or anything), no sounds are produced, but the sleep indicator stays at half brightness, until I force shut down the laptop again (holding down the power button).
How can I get this laptop to start up again normally?
Thanks,
George.

Hi George,
This sounds like a firmware update. Apple has a firmware restoration CD that you can make. What you do is download a disc image of the CD, burn it in another Mac, and then run it on your computer that's not working. The directions are kind of involved, so you might need to print them.
Also, pay special attention on the firmware download page to the section where it tells you which computers it's good for. I've linked to version 1.7, but there are other versions available, too, depending on which computer you have.
charlie

HT3180 My Apple TV is not starting after the software updates

I have tried to use menu and down on remote , disconnected power supply etc but nothing is working to restart the Apple TV

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Internal speakers on my iPhone are not working after latest software update.

I'm not able to listen to my calls (unless I use speaker phone) after updating to the latest iOS 8.3 software. Any input? - Thank you!

Is the mute switch on?
Basics from the manual are restart, reset, restore from backup, restore as new device. Have these been tried?

Will not start on New Install. Opening goes straight to Crash reporter

Will not start on New Install. Clicking on icon does not open a window and goes straight to Crash reporter. I cannot access a window to try to open in safe mode (unless there is another method than outlined in the help article).
I run Windows XP and trying to install the latest 15.0.1 version. Before install, I did disable my Symantic virus protection. I have never used Firefox and would like to try it, but I'm having little success so far to even get started.
Please let me know if anyone has any other ideas or need more information from me.

hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

My iPhone will not start after new software update. Freeze on apple screen

Similar Messages

Maybe you are looking for