My iphone will not switch on, it is only showing the apple logo can anyone help?

my iphone has frozen, when i turn it on the apple logo comes on and thats all, can anyone help?

Sure, start here:
http://www.apple.com/support/iphone/troubleshooting/
iOS: Not responding or does not turn on
iOS: Unable to update or restore

Similar Messages

  • Ipod touch wont switch on and constantly only shows the apple logo screen

    ipod touch wont switch on and constantly only shows the apple logo screen. Have tried to reset by holding both buttons down but hasnt worked. it also doesnt appear on itunes.

    Hvae you tried:
    - Reseting the iPod and then try restoreing the iPod
    - Placing the iPod in recovory mode and then restoring the iPOd.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT4623 while updating to ios6 my phone stopped mid way and will not continue or come on its only showing the apple logo. Anyone else having this problem

    While downloading iOS6 my phone stopped mid stream now its stuck on the apple logo and wont turn off or on or do anything. Is anyone else having this problem

    If your iPhone is listed in iTunes, click Restore on the Overview page and follow the instructions on screen.
    Should iTunes not detect your iPhone, try the following:
    Turn the device completely off and remove the USB cable from your iPhone while keeping the other end of the cable plugged into your computer.
    Now take your phone and press the home button.
    While you keep the Home button pressed, reconnect the USB cable to your iPhone
    Continue pressing the home button until the "Connect to iTunes" logo appears on your iPhone
    Now follow the instructions on your screen to restore your iPhone
    For more details check out http://support.apple.com/kb/HT1414
    Hope this helps,
    Chris

  • I need some help, i errased all the contents and settings and I cant get them back as my iphone is blank and only showing the apple logo. Please help

    Hi all,
    I lost all data in my iphone when I was trying delete unwanted contents. my iphone is blank and I cant start it or switch it off. It only starts automatic once I switch it to the power outlet and cant switch it off when it has power.
    Please how can i restore all the settings.
    Loch

    Put it in recovery mode and restore it: http://support.apple.com/kb/ht1808.

  • My iPad 2 has frozen - it will only show the Apple logo. Any help?

    My Ipad 2 has frozen andjs shows the Apple lgog. Ant thoughts?

    Hold down the on/off  and the home button for about 30 sec, if should restart.

  • My iphone will not switch on despite connecting it to the charger

    my iphone will not switch on despite connecting it to the charger.  It switched itself off while i was uploading a video to facebook and has been completly unresponsive ever since.  Any help or advice greatly appreciated, thanks

    try a hard reset
    press power button and homer button together for 10 secs or till apple logo appears, release keys as soon as u see the apple logo
    good luck

  • I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step.  anyone help?

    I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step.  anyone help?

    It was telling you that you needed Mac OS 10.6.8 or later, not itunes 10.6.8
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later"
    http://www.apple.com/iphone/specs.html

  • My iphone 4s crashed today and will not go back on.  I see the apple logo, but nothing else will happen.

    My iphone 4s crashed today and will not go back on.  I see the apple logo, but nothing else will happen.

    Hello jaicob1990,
    Try the steps in the article below; it will give you multiple options on how to resolve the issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

  • Ipod only showing the apple logo and will not do anything else. 1st GEN

    my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it

    Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.

  • I can no longer see my iphone on my computer. the ipone is gone blank only showing the apple logo

    my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?

    Your iphone is shown at the top of the page.
    You can also simply click View>Show Sidebar and it will look about the same as it did before.

  • I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

    I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

    Hello,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

  • What do i do if my iphone only shows the apple logo?

    It only shows the apple logo noe and then. Help please

    Restore it.  This link will help:  If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HT201412 my ipod touch does not turn on after steps 1-4.  It only shows the apple logo and then turns off

    my ipod touch does not turn on after steps 1-4.  It only shows the apple logo and turns off

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPad air would not start.  Only show the apple logo then no reaction after that.

    My iPad air would not start.  Only show the apple logo then no reaction after that.  This is already the 2nd time.  Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem.  It happened less then 30 days and same problem again.  Can someone please send me the hard-reset step so I can try myself before I send back to the service center again?  thanks

    Here's the hard reset info:
    http://www.hard-reset.com/apple-ipad-hard-reset.html
    Post something about what happened with your visit.

Maybe you are looking for

  • IMac Freezes Periodically During Screen Saver Only

    I own a late-2006 Intel-based iMac. Over the last few months, I've noticed that the iMac freezes when the screen saver is running. This doesn't happen all the time, and it doesn't matter what screen saver I use. (None of the screen savers is a third-

  • Post Capitalisation

    Hi, While posting an entry to asset for Post capitalisation by Tcode ABNON, i got little confusion. Which dates are to be used in the following input fileds? Document Date Positng Date Orig Val date I am sure that, by posting this transaction system

  • Web Integration Server service can't start in Windows Nt

    Hi there, I just remove my Portal-to-Go 1.0.2 in Windows NT Server, and install the 1.0.1.4.6, but after the installation, in the service in control panel, the service Web Integration Sever can't start, the error message is 2186: the service does not

  • Defining interactions on embedded controls

    When a user hovers over an image, I would like to display a button that the user can click to navigate to a different page. Pretty straightforward requirement.  I am able to successfully display the button when I hover over the image but the button_c

  • Recursive BOM

    Dear Gurus How to calcualte Standard cost of a material (CK40N) through Recursive BOM What are the steps to be followed and what are the precautions to be taken Regards Bala