My iPhone will not turn on, what should I do?
My iPhone will not turn on, I press the power button and the screen stays black, it's been on charge for the past hour and nothing is happening still. This has never happened and I've had my iPhone for over a year. What should I do?
Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Similar Messages
-
HT1414 my iphone will not turn on. what should i do?
Ive tried every step provided by apple but my original iphone will not turn on. what should i do?
Well, if you've tried "every step", then there's nothing more to do. Bring your phone into Apple.
-
My new iPhone randomly just stopped working and will not turn on what should i do?
My new iPhone randomly just stopped working and will not turn on what should i do?
thanks paul, i just had a similar problem, had to hold it for 30 seconds and the apple sign has come up, my phone was vibrating for over two hours completly unresponsive, now my lap top seems to be comunicating too, oh hello, its back on again...thank you!!!!
-
I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do? do I just need a new screen or what? I'm freaking out here
Don't freak out, just get over it. It's probably done.
What should I do if I drop my phone in the toilet?
Apple may offer you an refurbished iPhone in exchange for yours, for about half the cost of a new one.
I wouldn't be too specific about just how it got wet -
My imac will not turn over, what should I do
my imac will not turn over, what should I do
Just FYI,
You are not addressing Apple here.
People here who help troubleshoot and attempt to correctly answer technical questions in these Apple Support Communities are Apple users just like yourself.
There are two initial things you can try.
An NVRAM reset.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down.
IF this fails to help reboot your iMac, you could try an SMC reset.
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Check back if neither one of these solves your iMac's issues. -
My iPhone will not turn on, all that appears is the iTunes icon and the image of the plug and wire, please help
The device is in recovery mode. See this support document for instructions on how to handle that.
If you can't update or restore your iOS device -
My brand new, fully charged, working for nearly 2 days iPhone 4S suddenly stopped working and will not turn on. I've tried recharging and it's unresponsive. What should I try to do?
I've had a similar thing happen to my new iPhone 4S three times. It gets hot and doesn't respond to either button -- the screen remains completely off. I have to hold down both buttons for awhile until the Apple appears and then everything seems fine... until it happens again. Once it happened overnight, so I missed my alarms. Another time, it was while I was at dinner.
Always it happens when the iPhone is on standby with the screen off and nothing particular happening with it. The iPhone 4S is brand new, hasn't been dropped, hasn't been messed with in any way.
Is there a way I can get a trace of what happened before I reset it? The system log (visible in "System Status" and other apps) starts with the reset, so it doesn't help here. -
My iPhone will not turn on, what am I to do?
I have the iPhone 4 on the ios 5 software, I apps was messing up so I turned my phone off when I tried to turn my phone the apple logo came up and still showing but will not come on. This have never happen before! I have been phoneless for over two hours and do not know what to do.. somebody help me PLEASE!!!
That setting is for turning on iTunes Match, if you are an iTunes Match subscriber. (iTunes Match is a separate service you can pay to subscribe to which will allow you to access your music library from iCloud - see http://www.apple.com/itunes/itunes-match/. When it is turned on, all music on the device is deleted and must then be accessed through your iTunes Match account.)
To turn on iCloud, you go to Settings>iCloud, turn it one and provide you Apple ID with a verifiable email address. See http://www.apple.com/icloud/setup/ios.html. -
My iphone will not charge . What should i do?
My iphone wont charge... What should i do
Try another cable, another outlet, see if the device is recognized on a computer. Try to narrow down the issue to see if it is the phone or something else.
If you think it is hardware related, schedule an appointment at an ARS or call tech support. If you're out of warranty there will be an out of warranty replacement/repair cost -
My iPhone will not back up, what should I do?
My iPhone 5 will not back up. I have plugged it into the laptop several times but as I proceed to sync my phone, it gets to step 2, "Back Up", and stays on this, failing to back up. Cannot put anything onto my new phone as it is failing to back up, please HELP
then do it yourself manually IOS how to back up http://support.apple.com/kb/HT1766
-
My Iphone 5 will not turn on, what should I do?
Even when I try turning the Iphone on by using my charger it still doesnt work (lock button doesnt work)
If it's a hardware issue (defective lock button), take it to an Authorized Apple Service Provider:
Find an Apple Authorized Service Provider
If it is a hardware problem and it is due to a defect in the unit (as opposed to damaging the unit), it should be covered by warranty. -
My iphone 4s will not turn on what can i do
My new iphone 4s will not turn on, what should i do
Has it been fully charged since you brought it out the box? if you have fully charge it.
Try a reset holding down the home/power button togetther for 10 to 15 secs or until you see the apple logo and then release. Wait for phone to boot back up. -
HT4061 my iphone will not turn on it blacked out and will not turn back on
my iphone will not turn on what so ever
Is it still charging? Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
If this does not work,try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore -
My iphone will not turn on or charge? What is wrong with it?
My Iphone will not turn on and it doesnt show the battery charging, what is wrong with it?
Try doing a hard reset by holding down the Home Button and the Sleep/Wake Button. This should either get the iPhone started back up or show you a battery icon. If you see the battery icon, go ahead and charge for about 20 minutes and it should be up and running.
If neither of the two happens; you may need a replacement iPhone. -
my iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?
Reset the phone like the manual says: hold the on/off switch and the home button simultaneously until the Apple logo appears. May take up to 30 sec
Maybe you are looking for
-
LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3
Hello , I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3. My universe is working fine with LOVs but when i run the webi report , the LOVs arent working. have
-
P2v migration,brandzone solaris10 on solaris 11-Exiting with exit code 254
hi... doing p2v migration on vmware : solaris 10 as branded zone on solaris 11 im moving my physical machine solaris 10 to brand zone as in soialris 11 some how im facing the issues..while zone installation it fails at the end follwing are the logs::
-
Hello, I am really new to the IT field and just got the task of reading Web Service data and then write it into an SAP table. As a first task, I started off by calling a web service from SAP. To do that, I have followed the several tutorials that I f
-
How to remove the XML attribute value in Indesign file by javascript
Hi all, How to remove the XML attribute value in Indesign file.
-
BOXI R2 Auditing and Performance Management Recommended Database Sizes
Hi, We have a 8 node BOXI R2 Cluster which we want to enable Auditing and Performance Management. Could anyone recommend what the sizes of these two databases should be in GB? I have to request appropriate disk space from our SAN team, and the databa