My iPhone will not use the 3G network.

My iPhone will not use the 3G network. I have to turn it off in the settings. Then my phone will connect to the E network. This is the only way I can make calls. Does anyone know why?

I am in Utah and with AT&T. I was able use 3G for about 6 months and then it just stopped. I took it to the apple store and they said it was an AT&T issue. I went to AT&T and they said it was an Apple issue. I had the SIM card replaced ands that still didn't work. It wasn't until I turn off the 3G that I was able to make calls again. Now I'm just on the E permanently.

Similar Messages

  • TS3694 My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time'  I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!

    My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time'  I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!

    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • My iphone will not play the music i have downloaded. can you help?

    My iphone will not play the music I purchased and downloaded. Can you help?

    That may be a problem related to network settings on your computer, or on the router that you use for connecting to the Internet.  Take a look at this article for a possible solution
    http://support.apple.com/kb/TS1368
    Since this actually a problem with using iTunes, and not directly related to an iPod (or an iPad), you may also want to ask your question in the appropriate iTunes forum category
    https://discussions.apple.com/community/itunes
    The specific problem is that you cannot connect to the iTunes Store when using the iTunes app, even through your computer has Internet access.

  • My iphone will not save the photos I have taken with the phone

    My iphone will not save the photos I have taken with the phone. I have now been working in Italy for 3 months. Shortly after I got here my camera stopped working and this was my only camera! I use AT&T and my phone is not hacked. I have no idea how to contact help from mac. My father in the states has tryed many times to talk with apple but nothing good has come. Please, can someone help!!!!!!

    Exactly one week after I posted notes on my "fix" (see above: I reset the phone and erased all my data), the problem has recurred. The camera pretends to take the picture, but nothing is saved in the camera roll but a blank white square. When I touch the square (where the photo should be) the application crashes and I'm returned to the home screen. In the meantime I have not synced any pictures from my iPhoto library, so I'm sure it's not a corrupt photo from my Mac that is causing the problem.
    This is upsetting, because I lost some great snapshots before I could get them synchronised off the phone.
    This also happened to my wife's phone. She took her's in to the Apple Store, and they helpfully reset her phone, erased all her data, and sent her on her way with a "fixed" phone. I'm going to have to go in and try to convince them that this doesn't actually fix anything.

  • HT201209 iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening

    iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening???

    Any time you've changed anything in your billing, it does this once to very things.

  • HT3986 I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy amac and install the OS  forom the pc to the apple product i will not use the pc after can i use the OS off

    I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS  from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?

    I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
    Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
    By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
    So you may not need to install Windows at all.

  • My iphone will not recognize the wifi password. used to connect automatically, now says incorrect password. help

    my iphone will not connect to my wifi. it keeps saying the passwrd is incorrect. it used to connect automatically.

    settings - general - reset - reset network settings.

  • My Iphone will not accept the Apple airport express as the Wi fi network so I can facetime, how do I fix?

    My Iphone (I have a 4s and 3G) will not accept the apple airport express as the wi fi network so that I can face time. How do I resolve this?

    What are the exact specifications of the wireless network you've created? (If you're not sure, open Airport Utility on your computer and check the Radio Mode in the Wireless tab). Bear in mind:
    - iPhones earlier than the iPhone 4 cannot connect to an "n-only" network - they need b/g compatibility.
    - No iPhone can connect to a 5GHz network (Compatibility mode will also fix this).
    Matt

  • I am having a data excess usage issue with my Jetpack although I did not use the VZW network at all.

    Background: My home does not have access to landline internet and I am relying on a Verizon Jetpack device rather than satellite cable for internet access.  Within my JetPack wireless network I have several devices connected, iPADs, PC’s, printer, etc. (up to 5 devices can be connected with my system).  Recently, I had one device within my immediate wireless network that I needed to transfer data via FTP to another local device within my immediate network.  The receiving device FTP’d data from device (198.168.1.42) to local IP (address 192.168.1.2).  To understand the data path a Trace rout for this transfer is 198.168.1.42 (source) to 198.168.1.1 (Jetpack) to 192.168.1.2 (receiver).  Note that the VZW network ((cloud)/4G network) was NOT used in this transfer nor was any VZW bandwidth used for this transfer (of course less the typical overhead status/maintenance communications that happen regardless). Use of the VZW bandwidth would be something like downloading a movie from Netflix, (transferring data from a remote site, through the VZW network, into the Jetpack and to the target device).  I also understand if ones devices have auto SW updates that would also go against the usage as well.  I get that.  My understanding of my usage billing is based data transfer across the VZW network.
    Now to the problem: To my surprise I was quite substantially charged for the “internal” direct transfer of this data although I didn’t use the VZW network at all.  This does not seem to be right, and doesn’t make much sense to me.  Usage is should be based on the VZW network not a local Wi-Fi.  In this case, Verizon actually gets free money from me without any use of or impact to the VZW network.  Basically this is a VERY expensive rental for the jetpack device, which I bought anyway.  Considering this, I am also charged each time I print locally.  Dive into this further, I am also interested in knowing what is the overhead (non-data) communications between the jetpack router and devices and how much does that add up to over time?
    Once I realized I was getting socked in bandwidth, as a temp solution I found an old Wi-Fi router, created a separate Wi-Fi network off the Jetpack, but the billing damage was already done.  Switching each device back and forth to FTP and print is a hassle and there should be no reason the existing hardware couldn’t handle this and charges aligned with VSW usage. Is purposely intended by Verizon? Is this charging correct? And can I get some help with this?
    Logically, usage should be based on VZW network usage not internal transfers.  All transfers between IP addresses 192.168 are by default internal.  Any data that needs to leave the internal network are translated in to the dynamic IP addresses established by the VZW network.  That should be very easily detected for usage. In the very least, this fact needs to be clearly identified and clarified to users of the Jetpack.  How would one use a local network and not get socked with usage charges?  Can one set up a Wi-Fi network with another router, hardwire directly from the router to the Jetpack so that only data to and from the VZW network is billed? I might be able to figure out how to have the jetpack powered on but disable the VZW connection, but I don’t want to experiment and find out that the internal transfers are being logged and the log sent after the fact anyway once I connect…. A reasonable solution should be that users be able to use the router functions of the Jetpack (since one has to buy the device anyway) and only be billed for VZW usage.
    Your help in this would be greatly appreciated. Thanks

    i had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
    Model Name:
    MacBook Pro
      Model Identifier:
    MacBookPro7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.66 GHz
      Number of Processors:
    1
      Total Number of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    8 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MBP71.0039.B0E
      SMC Version (system):
    1.62f7
      Hardware UUID:
    A802DE22-1E57-5509-93C5-27CEF01377B7
      Sudden Motion Sensor:
      State:
    Enabled
    i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
    the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it.  i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
    tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
    if you need screenshots or data of anything else as away
    [problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain

  • My iphone can not find the wifi networks

    my iphone can not find the wifi networks

    Is your router plugged in?  Do you have internet?
    Come on...
    I have the same issue.  Yesterday I could connect to my wifi just fine, but today I turned on my wifi and the wheel just spins and spins.  I restart my phone and I get the "greyed out" wifi switch. So I restart, and I'm back to square one.  The wheel just keeps spinning.
    I've updated the router firmware, I've power cycled everything multiple times, and still nothing.
    Can anyone give a real solution? Or do we just have to suffer until apple update this **** IOS6?

  • HT1476 my iphone will not charge the usb that comes with the iphone is being used and it recognizes it but it wont charge

    my iphone is not charging i have restored it twice now and it still wont charge on the charger that i got with the phone. it sees that the phone is there  and i can do stuff in itunes but it wont charge PLEASE HELP

    If your iPhone won't charge with the power adaptor or when connected to your computer, do you have access to another USB dock connector cable to rule out a problem with the existing cable you are using?

  • My iphone will not open the lock it will not let me use the screen

    My phone is locked and has a thing that says no storage space. it will not let me hit cancel and it will not let me turn the phone off. the screen is not working to the touch for some odd reason.

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My ipad 2 is not using the wifi network

    I have connected my Ipad 2 to the wifi network but it is not using it to use the internet. I have tried refreshing the network rebooting my ipad. do I need to put in the server details manually

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • My iphone will not display the scrubber bar, shuffle or repeat icons.

    Since the latest upgrade to 6.1.3, my iphone 4 will not play songs unless in shuffle mode.  I get no scrubber bar, repeat, or shuffle  buttons on the album header.  I cannot get the shuffle feature to turn off.  Anyone have an idea how to correct this?  Playing all music in shuffle is very frustrating.

    You can use the genius, it is almost the same.

  • HT1386 my iphone will not sync the apps that are on it to my computer. this is really frustrating becasue i need them on my ipad. can somone help please

    my phone will not let me put all thee stuff on my iphone to my computer...please help thx

    bogdan0,
    Tried that but did not work.  Thank you for the reply.  However, I did find the correct thing to do though so wanted to share.
    Since on my computer I had to create a new admin account,  I had to go into the shortcut properties of Itunes.  Then hit Compatibility Tab.  Had to check Run as Admin.  
    After hitting Change settings for all users it worked just fine.

Maybe you are looking for

  • External hard drive - mac specific or generic?

    While I was browsing external hard drives I noticed that there was one that said it was specifically for Mac - I think it was Western Digital. So I was wondering is there a reason to pay extra for a Mac specific external hard drive, or just to use a

  • With intel core 2 duo it's possible more RAM? in early imac 2006

    I could change the processor core duo per core 2 duo of my IMAC, that is from early 2006... the cuestion is: the description of this mac says that only works with 2 gb of ram, but with the new processor it can upgrade this RAM, per 3 or 4 gb? Thanks

  • Float values in mysql. help appreciated.

    Hi all, I have a mysql db table where a few of the fields are of type 'float unsigned'. When inserting large values into these fields (I am using statement.setDouble()), mysql seems to convert the values to the form 1e+0x, for example 1,000,000 to 1e

  • Planning for Persistent Chat

    Dears, I would like to know if persistent chat databases could use SQL 2012 always ON. My design has two data centers and a stretched persistent chat pool. Is there any documentation if this scenario can use SQL always ON or not? Thank you, Regards

  • Save game and load game??

    i wrote a simple word base Rpg game, try to save some data and positions to a file, but dont know why it just allows me to save integer from 0-255?? why?? can anyone help? the code is following, public void Save () throws IOException {           x =