My iphone won't go pass the battery screen but it says it is plugged in?

When I was on vacation, my iphone stopped charging. I changed cords and outlits, but the phone would only recognize that a cord was there and not charge. I powered off at 60% so when I got home I could back it up if needed. When I got home, however, my phone said the battery was empty. It is currently on the empty battery screen with the charge under it and hasn't changed for the last hour. I've tried a hard reset. Is there any way that I can save my phone or save the data? Or do I just need to get a new phone? And if I get a new phone, will they be able to transfer the data I have on it?

First try a reboot - press and hold the power and home buttons until the Apple icon appears.

Similar Messages

  • Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Are you following these instructions?
    http://support.apple.com/kb/ht4796
    Have yo tired by connecting both to same network vice direct ethernet connection?
    There is no direct USB connection

  • My iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

    my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

    Apple's activation server is down.
    I called Apple and the support team had the same issue.
    All you can do is be patient.

  • I have a ipod touch 8gb when i plug it in to charge it just blinks from the apple screen to the battery screen but will not charge what could be wrong it was fine yesterday?

    I have a ipod touch 8gb . When I plug it in to charge it just blinks from the apple screen to the battery screen what could be wrong?

    Maybe:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4528 My iphone won't go past the apple screen

    I was having difficulties with my iPhone 4 around 1ish eastern time so I decided that turning it off would help.. When I tried turning it back on it woudn't go past the apple logo. I decided it'd be best to let it rest. I've tried the recovery mode and it didn't do anything. I tried connecting it to my computer and it didn't do anything. Now 7 hours later I have it plugged in and it still won't go past the apple logo. Someone anyone.. Please help me!! Thanks in advance

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

  • Can you put a microsim with no plan in the iPhone 5 to get passed the Activation Screen?

    I use a blackberry and I only bought the iPhone for music, camera..etc, and as a back up phone. I just want to get rid of the activation screen for good.

    I know but if I use it ONCE to activate my phone(lets say I borrow my friends nano sim), will it get passed the set up screen?

  • I have a 4th generation iPod nano 4th and when I turn it on, the screen won't progress passed the main screen with the Apple logo. What should I do?

    I have a 4th generation 8GB iPod nano and it will not progress past the blank screen with the white apple logo on it. I have charged it fully and tried to restart it by pressing and holding the menu buttons for 3-7 seconds. The devices screen will turn off and then, after a couple of seconds, the screen with the Apple logo will appear again. This screen will remain lit until the iPod runs out of battery again. I have tried plugging it into my Macbook Pro. I have the newest versions of iTunes software and OS X Mavericks. The computer will not recognize the iPod and the device will not show up in the computers list of devices. I looked up the troubleshooting for the device and found out how to put the device into disk mode. I followed the intructions but the iPod would not go into disk mode. The screen still displayed the Apple logo and would not set into disk mode. I fear that I have run out of options. I have come to this forum in hopes that I can still salvage my device. If there is anything I can do, please loet me know so I can try it. If not, I am affraid I will have to go to an Apple store of authorized retailer and have it repaired or replaced.

    Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
    From http://support.apple.com/kb/HT1363
    Putting iPod devices with a Click Wheel into Disk Mode
    If necessary, verify that your iPod has a Click Wheel.
    Before placing the iPod into Disk Mode, verify that it is charged.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
    When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
    If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
    B-rock

  • I just bought a jail broken iPhone and then did a factory reset on it. Now it won't get passed the loading screen. Is there anything I can do without the jail-breaking software?

    When I bought it it was working just fine. There was no sim in it when I got it. I went into the settings and reset the phone back to factory. The phone rebooted itself and now, when the loading symbol is done loading, it goes away for a second and then is right back. It just keeps rebooting over and over until it's dead.
    My computer won't find it and the charger isn't charging it anymore.

    Possibly... but per the terms of use of these forums, discussion of jailbroken devices is not permitted.
    <Edited by Host>

  • HT1212 i cannot get my iphone to come on passed the apple screen

    I was prompted to download a software update on my iphone this morning. Since that time I have not been able to turn on my phone.
    I have only the apple logo showing.
    I can be reached at 7095968259
    Thanks
    Tracy

    Hello Tracy
    you need to resotore you iphone for that
    connect your iphone with computer
    open itunes
    Hold power and home button togather for 10 sec and after you will see restore option on your itunes
    hit restore.
    Please back up your iphone first

  • Reset phone, but phone won't get passed the apple icon

    Tried to sync my phone last night on iTunes and it gave me error 13019 and couldn't sync. Since then I have tried to restart my computer, reset phone and now iTunes doesn't show my iPhone and my iPhone won't get passed the apple icon from the reset. Any help would be greatly appreciated. Thanks.

    iTunes and it gave me error 13019 and couldn't sync.
    Follow the directions here regarding that error code:
    http://support.apple.com/kb/TS2830

  • IMac won't start up passed the grey screen

    Last friday my iMac (late 2006, 24", 2.33 duo core Intel, OS 10.6.8) gave me the spinning beach ball.
    Restarting resulted in: first the apple screen with the progress indicator, followed by grey screen..
    That was it. It hangs at the grey screen.
    I've been busy this weekend testing all kinds of ideas to get my imac to fully start up again.
    I checked the RAM, it's fine.
    I flushed NVRAM, wild guess, but nothing changed.
    Starting up in safe mode doesn't work.
    Starting up in recovery mode doesn't work.
    On the upside, I was able to start my imac up in Target mode. Using the host computer and Disk Utlity I can see there's nothing wrong with the HD. All the data is still there!, so later today I'll make a copy of the complete HD, hoping/thinking that I won't copy whatever is wrong.
    I had Disk Utility repair all the permissions.
    I've used the host computer to reinstall the OS on my imac.
    But on start up my beloved iMac still won't get passed the grey screen.
    I'm thinking something goes wrong before my Mac even gets to the HD. Maybe it's the firmware, but I'm not really sure that firmware matters in this case. And I wouldn't know how to reinstall the latest version of firmware because my imac won't start up from it's disk drive
    I'm thinking maybe something could be wrong with the graphic card's RAM, though on start up I can see the apple logo just fine.
    I'm not able to start up from CD, I've tried that because I wanted to reinstall my OS (before I figured out how to do that in Target Mode) by putting the OS disk in my imac's own disk drive. Staring up with the C key still gets me the grey screen. Staring up with Option key shows no other option but the HD.
    So is there anybody out there who has an idea that could help me further along?
    Any help is greatly appreciated!
    Frank

    Hi Jan,
    If you have another firewire Mac you can check if the HD of your Mac is OK by connecting them with a firewire cable and use target-mode. That way I found out my HD was just fine.
    It also offers you the chance to run a diagnostic program to check if anything else is fine. I used TechTool to do that. But everything checked out fine.
    In the end I decided the problem is probably hardware. Some electronic part that broke. Very frustrating that some small transistor or so is keeping me from using my otherwise fine iMac.
    I contacted a repairshop that also works for the local Mac retailer. They told me my iMac was concidered 'classic' and therefor it wasn't economically not worth the trouble trying to repair it.
    I gave up, took two weeks to mourn the loss of my beloved iMac, and bought a Mac mini.
    FrankV
    Judging by your name I'm guessing I could've anwered this in Dutch.

  • I am using a very old iphone and have forgotten my password. Is there anyway to get passed the lockout screen?

    I am using a very old iPhone and have forgotten my password. Is there anyway to get passed the lockout screen? It says to connect to iTunes but when I do nothing happens. I've read through the user guide and am at a loss.

    Bypass & Reset the iPhone Passcode
    Disconnect the USB cable from the iPhone, leave the other end connected to your Mac/PC
    Launch iTunes
    Press and hold the Home and Power button on the top of the iPhone to turn off the device
    Press and continue to hold the Home button while you reconnect the USB cable to your iPhone, this will cause the iPhone to turn on
    Continue to hold the Home button until an alert message in iTunes appears that an iPhone in recovery mode has been detected
    Now that the iPhone is in recovery mode, you must restore the device:
    From iTunes, look under the “Summary” tab
    Click on the “Restore” button within iTunes

  • HT4528 I just got a replacement iPhone 4s and i let the battery run down all the way before charging it and now that i have put it on the charger it won't turn back on or show any signs that it is charging. its just a black screen. how do i fix it

    just got a replacement iPhone 4s and i let the battery run down all the way before charging it and now that i have put it on the charger it won't turn back on or show any signs that it is charging. its just a black screen. how do i fix it

    Keep iPhone on wall charger for ten minutes, it may turn ON itself. If still nothing, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to respond.

  • I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have, it conects to my itunes and computer, but just won't get passed the logo..what can i do? :/

    I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1349 My ipod touch won't turn on. The battery is not dead. When I plug it in to the charger or computer nothing happens.

    My ipod touch won't turn on. The battery is not dead. When I plug it in to the charger or my computer nothing happens. Does anyone know what to do?

    You might want to post your question over in the iPod Touch forums (this is iPhone): https://discussions.apple.com/community/ipod/ipod_touch.

Maybe you are looking for

  • EJB Design  Pattren For File Transfer Application

    hi, My requirement is Transfer of large files (around 300-500KB) across the network with a central repository.We looking at a Solution from J2EE With EJBs. At the Central Repository we are looking for ejb-Application Server. But the the issues i come

  • Personal number field in asset master

    Dear experts, In Asset master-Time dependent tab we have option to put the personal number. Kindly tell me where we have to configure this personal number in the system and we are not using the HR module in present implementation (this will get any t

  • Windows 7 Freezes When Copying to QNAP NAS-TS210

    I have been using a QNAP-NAS TS210 with Windows 7. It worked perfectly until HDD2 failed and had to be replaced. There were some minor issues after I replaced the drive and QNAP tech support suggested that I update the firmware. Since then Windows fr

  • API for creating PM schedule

    Hi, Has anyone done PM scheduling using API. Please share if you have. I have to convert contracts from legacy and would really appreciate any help regarding PM scheduling. TIA, Alka.

  • Grey out an application for a person who already has filled the application

    Hi All, I have made an application which is prompts user to select various check boxes and fill text boxes. At the end of the form there is a submit button, which upon clicking inserts a record in database with that particular persons id. Now the iss