My iphone won't go past the apple logo and won't turn on and im not near my home computer with itunes help

my iphone 4 won't turn back on past the apple logo it keeps going off and on. help

Exactly the same thing is happening with my 4s !need help asap!!

Similar Messages

  • I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have, it conects to my itunes and computer, but just won't get passed the logo..what can i do? :/

    I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Macbook pro won't go past the apple logo (Lion)

    I've installed Java Runtime, and after that tried to use "software update" but the application quit.
    Tried to restart, but it stays stuck on the apple logo (with the wheel turning) for ages. Restarted in recovery mode, ran disk utility, repaired permissions and verified disk. no problems found. Restarted again, still the same thing - won't go past the apple logo.
    If reinstall is the only way to go, is there a way to access this hard drive to back up files (it is a recent computer, still hadn't made any backups...)
    Thank you all, help would be much appreciated!

    Shut down and startup holding command-r keys into Recovery Disk from there choose Disk Utility and Repair Disk.
    polymolly wrote:
    I've installed Java Runtime, and after that tried to use "software update" but the application quit.
    Tried to restart, but it stays stuck on the apple logo (with the wheel turning) for ages. Restarted in recovery mode, ran disk utility, repaired permissions and verified disk. no problems found. Restarted again, still the same thing - won't go past the apple logo.
    If reinstall is the only way to go, is there a way to access this hard drive to back up files (it is a recent computer, still hadn't made any backups...)
    Thank you all, help would be much appreciated!
    Ooops you've been there, done that. You can use Target Disk Mode if you have another Mac.
    EDIT: Was the Java Runtime from Software Update?

  • Iphone 5 won't get past the apple logo

    Hi,
    My phone died last night and i put it on charge, the apple logo appeared but nothing more. I tried to reboot the phone numerous times by clicking the home and power button together, ive tried leaving it over night on charge, and ive also tried to plug it into my mac and restore it. This morning i tried the same methods of which none worked however at one point it clicked into the welcome page to swipe across and then entre my wifi details, i added those and continued to click the back up from itunes option, it backed up and restored and completed, however the apple logo appeared again and didnt boot into my home screen so im left with the apple logo still on my screen and no further.
    Any help would be massively appreciated!
    Thanks

    http://support.apple.com/kb/ht1808

  • MacBook won't boot past the apple logo screen!

    So my MacBook started freezing up and I went to restart it and it wouldn't boot past the grey logo screen with the spinning gear. Its pretty old and therefor still has the Leopard operating system. I've been trying to run Disk Repair using a Snow Leopard install disc but it just gets about 30% done and then doesn't go any further. Eventually I stopped the disk repair and just tried installing OSX but when it asks me what drive I want to install on there are no options available to click. I've got alot of unsaved work on this old thing and would love to get it running soon! Any help would be extremely appreciated! Thanks

    I've been trying to run Disk Repair using a Snow Leopard install disc
    Install discs are "machine specific" .. you can only use the install disc that came with the Mac for repairing the hard disk.
    You may not have enough free space on the startup disk.
    Follow the directions for starting up in Safe Mode
    A Safe Mode boot can take a little longer then a normal boot so be patient.
    When you see the Desktop, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    If there isn't enough free space, help here > Freeing space on your Mac OS X startup disk
    You can use Disk Utility to verify the startup disk from Safe Mode but you can't repair the disk. You will need the install disc that came with your MacBook for that. While you have Disk Utillity open check S.M.A.R.T. status at the bottom of the window. Make sure it says:  Verified
    When you are finished, click the Apple menu icon top left in the screen. From the drop down menu click Restart.
    If you don't have the original install discs you may be able to request a replacement. You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

  • My iphone 3gs wont load past the apple logo

    my iphone wont charge or turn on. occasionally it will charge for 20seconds then it will get stuck on the apple logo then the screen will light up slightly as if it is going to turn on but then it goes off and i cant do anything with it again for days on end, can anybody help or is it time for a new phone?

    is the phone jailbroken? if it is, that could be the issue. if not, you should probably do a back up and then restore your iphone. if that doesn't fix it... well the phone is almost 5 years old, be happy you had it that long.

  • Won't boot past the Apple logo...

    I have an '07 MacBook that was upgraded to Snow Leopard about 6 months ago. I've had it for about 3.5 years with no problems-- until now. Last night I turned it on and it booted fine. However, once it had booted, the spinning pinwheel would not go away when I was on "Finder". Despite this, Firefox loaded up fine. But I didn't want to do stuff on the computer when I knew something wasn't right. I tried to restart it, but it wouldn't shut down, so I was forced to cut it off with the power button. When i tried to turn it back on, it wouldn't get passed the white screen with the Apple logo and the little spinning load signal. Along with that, a load bar that I have never seen on that page before began to load up, but it disappeared after filling up to about 10%. I let it sit for a while before turning it off and trying again. By this point I was freaking out, because I have some valuable documents/files that I haven't backed up yet that I really need. I got on my sister's computer and began to research all the topics where people had the same problem. I did everything. I tried the verbose mode, but everything seemed to be okay. In verbose, I did the fsck -fy and reboot, but it still wouldn't start. I did the PRAM and SMC resets. I tried to open it in Safe Mode, but I couldn't get it to open. This morning, I got out my Snow Leopard disc and was able to boot that up. Unfortunately, I, stupidly, have not used time machine to back anything up like I should. I don't want to just wipe and restart everything because there are some files I really need to get. I'm trying disc utility. When I verify the disc, it says that the Sibling Link is invalid and it can't repair that. It tells me to back up as much as I can and then to wipe it and start over, but I don't know how to back stuff up from here. I've also tried "Permission Verify". It comes up with all this things that say either "Group differs on..." or "Permissions differ on..." and then it goes on with a long line of text starting with "Applications/Utilities/....etc. etc." and they all end with either "should be 0, group is 80(or 90)" or "should be -rw-r--r--, they are "-rw-rw-r--". But before it finishes verifying them, it stops loading with about a minute left and pretty much just freezes other than the mouse being moveable.
    I'm out of town right now, but I'm probably just going to take it in to the local Mac store when I get home since there's not one around here. Of course, if this is something that I can fix, I'd prefer just to do that. Someone please put me out of my misery and tell me that my files are recoverable. When I'm in disc utility, it says I have the exact capacity I had when my computer was booting, so that gives me hope that all of my files are still there, not to mention the fact that I could see them in another program under "Utilities". Unfortunately though, I'm not computer-savy enough to know what to do. Sorry for all this writing, but hopefully this way all you tech-wizards' questions will be answered so that you know how best to help me.

    Yes, I'm using my snow leopard DVD. I wrote all of this in my first post. I tried to boot safe mode from Terminal by doing the "sudo nvram boot-args="-x"" thing. Also in my first post, I said that i used Disc Utility and that it told me the Sibling link was missing or was wrong. Read my first post and you'll see everything that I've tried.
    Also, an update on something, now when I upload in Verbose mode, it tells me the bugs; it didn't do that before.

  • Replaced Iphone 3g screen, now it won't go past the apple logo?

    A few months ago I shattered the screen in my Iphone 3g, I ordered a screen replacement, and while replacing the screen my finger went through the LCD screen and the phone was black on half and blurry on the other half. I got an iphone from a friend and used the LCD screen out of that to replace the broken one in mine. While doing that......ribbon cable #2 snapped.....so I went back to my original cracked screen because all of the rbbon cables were in tact.
    Now, when I try to turn the phone on all that shows up is a picture that says the phone needs to be charged, I hook it up and after so long the apple screen pops up for a while, then it swtiched to the loading screen and either goes back to the apple screen or just goes black and shows the charging picture all over again.
    My computer won't recognize the Iphone, and I have no idea what the problem is..or how to fix it.
    My other iphone 4 broke, can anyone help??

    You are actually incorrect. The phone just needed an update. It took about an hour of it being hooked up to itunes for itunes to recognize the device but it's updating as I type this.

  • HT3964 Computer won't go past the apple logo And rotating fan

    Computer won't go past gray screen with rotating bars. No apple store close.

    What do you see if you hold down the "V" key during startup (from power on until slightly after teh boot chime)?  That should cause the system to boot with verbose mode, displaying a text "boot log" on the screen.  The last entry on that screen when it "hangs" might help to identify what is causing the OS to hang at load time.  It could be a piece of faulty hardware, or it could be incompatible software.  I know that when I upgraded my current system from OS 10.8.1 to 10.8.2 I found that I had an incompatible piece of software that caused my machine to behave like you are describing.
    If you have *any* external devices attached, try disconnecting those befoire you try to boot your computer too.  Lastly, you could try to boot into "safe mode" (hold down the shift key during the startup process).  This won't fix the problem, but it might help to identify the cause if it will actually boot in safe mode.

  • My IPhone 4 won't go past the Apple Logo!

    I tried to press the Home Button and the Sleep/Power button at the same time and it didn't do anything. I plugged it in my computer and opened up ITunes and nothing happened! HELP PLEASE! Is it a 5OS problem? I thought after a week It would be okay but nothing has happened! It just turned off randomly and I don't know what to do now.

    Sounds like the iPhone is damaged beyond repair.
    Out of Warranty replacement in the US is $199.

  • My iphone has been toggling between the Apple logo(like its just been rebooted) and the home screen. I cant do anything to stop it. Batt still has some juice. It keeps beeping also, the same beep u hear everytime u plug in to charge.

    I have updated it to 4.3.3 abt 2 weeks ago. I have also tried rebooting it a few time but to no avail. You can email me at [email protected]
    Thanks!!!!

    Hi, did you ever solve this problem?
    My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
    It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
    It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
    Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
    Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
    Any help would be much appreciated!!

  • My iPhone 3gs is stuck  on the apple logo, please help!

    So i turned my iPhone off and went to turn it back on but it won't go past the apple logo. I tried turning it off again but it doesn't turn off but 5 or so minutes later it will turn off and then turn back on again but it still stays on the little apple logo. Someone please help!

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT4528 My iphone won't go past the apple screen

    I was having difficulties with my iPhone 4 around 1ish eastern time so I decided that turning it off would help.. When I tried turning it back on it woudn't go past the apple logo. I decided it'd be best to let it rest. I've tried the recovery mode and it didn't do anything. I tried connecting it to my computer and it didn't do anything. Now 7 hours later I have it plugged in and it still won't go past the apple logo. Someone anyone.. Please help me!! Thanks in advance

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

  • Macbook froze, now it won't get past the boot logo!

    I was using my macbook tonight... using a bunch of programs, then all of a sudden everything just froze. I turned it off by holding the power button, then booted it back up... but it won't get past the apple logo and the circle just keeps moving round and round. I've never had any issues with it until today so I'm kind of surprised. Any ideas how to fix this?
    I do have generic 3GB ram but it has never given me issues for the past 2 years. I also installed a WD blue scorpio 500GB hd a few months ago and I haven't had issues with that either.
    PLEASE HELP!!

    tibookg4 wrote:
    I was using my macbook tonight... using a bunch of programs, then all of a sudden everything just froze. I turned it off by holding the power button, then booted it back up... but it won't get past the apple logo and the circle just keeps moving round and round. I've never had any issues with it until today so I'm kind of surprised. Any ideas how to fix this?
    I do have generic 3GB ram but it has never given me issues for the past 2 years. I also installed a WD blue scorpio 500GB hd a few months ago and I haven't had issues with that either.
    PLEASE HELP!!
    Hi I have been looking at this drive for myself and heard that some people are having issues.
    I would suggest you try to boot again holding down the OPTION key this will show you all the drives connected and determine if you can see you WD. If so click and see. If not I suggest you put your OS X Install DVD in.
    DO NOT INSTALL
    Goto utilities and Disk Utility.
    Can is see the drive there?
    If so select the drive and then goto REPAIR DISK can also repair permission but this sounds like something else.
    Resetting the PRAM may help, but I do not suspect this is part of that problem.
    Good Luck!
    -h

  • IPhone 3GS won't turn on past the Apple logo and there's a swirling circle too...

    Hi! For a while now, my iPhone has been a pain in my butt. I dropped it whilst out for a meal in April and it cracked the screen and did damage to the bettery which means that the iPhone turns off randomly when not connected to a power source (An Apple Genius has told me this).
    But when out today, my iPhone shut off and it wouldn't turn on past the Apple logo. After about 30 seconds, a little circle like thing pops up on the bottom of the logo and starts to 'swirl' and it does nothing when connected to a power source.
    I've hard reset it, connected it to iTunes and nothing seems to work. I tried restoring it in July and that didn't do anything to the phone at all.
    Any help at all will be hugely appriciated and if anyone else has had the same problem as what I have, how do I fix it?
    Thank you!

    Wow sure sounds like your iPhone is in really bad shape.
    But the next step is a DFU Mode Restore. If this does not work your iPhone is telling you it needs major most likely expensive repairs, or outright replacement.
    DFU Mode Restore, with iTunes open connect iPhone to your computer, hold both Home and Power buttons for exactly 10 seconds, release Power button continue holding Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds longer. If the screen is blank, black this is DFU Mode. Restore the iPhone Firmware. DFU Mode again is iPhone in Recovery Mode per iTunes but has a blank, black screen. If not successful keep trying to get DFU Mode, it can be a bit difficult even for experienced users to get, keep trying.

Maybe you are looking for

  • File Adapter Issue in SOA Suite11g

    Hi, I have been facing a strange issue while testing my BPEL process. I have a BPEL process which reads input as event listener and then does a small transformation At last its writing that output message into a txt file using FileAdapter. While test

  • Displaying a Long Messg on Canvas

    Hi All, Iam having a problem with displaying a long string on Canvas. I have a long file,which iam taking in a string and Displaying it on a Canvas. The problem is that the display is only on a single line. After the end of width of the screen,the st

  • All can see on my desktop is the screen saver, no folders and no icons/docks can anybody help?

    all i can see on my desktop is the screen saver, no folders, icons / dock it happened after cleaning the laptop and may have pressed random things on the keyboard when wiping over them, any suggestions? Thanks!

  • Multiple users of a database

    I happily use an AppleWorks database at work. Other users on the network have access to the same database. I'm sure the answer is going to be "no" but is there any way of allowing multiple users to access the same database at the same time? I can see

  • How to start afresh every quater?

    I have only been working on databases for 3 weeks so forgive me if this is a stupid question but is there an easy way for the system to start a new table every quarter? I have a table with people's names and the hours they work in a specific quarter.