My iphone won't ring for me to answer or when I send a call, no dial tone.

when I get phone call, I miss it because it doesn't ring and also when I make a call, there is no dial tone.

Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone starts back up, see if it will work. Also, I have never witnessed a cell phone give you a dial tone. You dial a number, then press send for the call to go through.

Similar Messages

  • HT1688 My iPhone won't ring when the caller is "Unknown". How do I make it ring in this sittuation?

    My iPhone won't ring when the caller is "Unknown". How do I make it ring?

    Do you even see the call come in on the phone? Do you see the missed call in your list? Or do you just get a voice mail.
    If it never even shows up in your missed calls list, contact your carrier. Perhaps you have anonymous call blocking on your account. (I wish I did...)

  • HT201210 while downloading any free application my iphone 4 ask me for apple ID and passward when i apply a valid apple ID and passward it prompt an error "cannot connect to itunes store"

    while downloading any free application my iphone 4 ask me for apple ID and passward when i apply a valid apple ID and passward it prompt an error "cannot connect to itunes store" please help me

    Sir i am talking about application store it opens show every thing but when trying to install any thing it said can not connect to itunes store. what should i do i use all methods of reseting and related to time mentioned in replies of people but all my efforts in vain i wish if i have some extra money i throw my Bloddy Iphone towards wall. Please help me

  • Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    iPhone: No sound or distorted sound from speaker

  • When my wife receives a call and her screen is locked she gets two choices. Remind me and answer. When I get a call, I get 3 buttons. Remind me, message and answer. Both are iPhone 4S with ios7.

    When my wife receives a call and her screen is locked she gets two choices. Remind me and answer. When I get a call, I get 3 buttons. Remind me, message and answer. Both are iPhone 4S with ios7. Is there some setting to fix this? I thought the phones were set up identically.
    Thanks.

    Glad it helped. I only remembered it was there because I'd just been checking something else in that screen.
    Best of luck.

  • HT4534 i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
    I also have this problem...........

  • My Iphone 5 won't ring for text alert

    New to smart phones and it won't ring when a new text message is recieved........I have down loaded ringtones from I tunes and IT WAS working...? But now any more

    Hi Check mute button on side of iphone Check control panel make sure half moon DONOT Disturb is off Try another Ring tone Check volume will music play. Cheers Brian

  • While using airplay iPhone won't ring

    While using airplay my iPhone will not ring.  The music cuts out and the phone will vibrate for a short time but won't ring through the speakers like it did before this last update. 
    This behavior happens with both iPhone 5c and 4s. 

    Here are a couple of articles from the apple support website that might help out.
    http://docs.info.apple.com/article.html?artnum=305740
    http://docs.info.apple.com/article.html?artnum=305744

  • Husband's iphone won't ring. need help please.  thanks

    My husband's iPhone 4 won't ring.  It will vibrate but ringing has stopped.  Can't figure out how to change back to ringing. Thanks for any help. 

    check on the left hand side, above the volume, there is a global mute switch, see if that is off

  • IPhone 5 only ringing for contacts with personalized ring tones

    I have an iPhone 5 and it only rings for contacts that I've assigned a personal ringtone to.  It does not ring for all other contacts with the default ring tone.  Also, I have the last iOSX, not the current operating system with improved Siri and all that.  I hope one of you beautiful people can assist me.  Thanks mates!

    Check your Do Not Disturb in Settings and make sure you don't have something enabled there.

  • My iphone won't ring

    After updating my phone won't ring...help

    You haven't told us much, so I'll guess there are one of two possible causes.
    Settings > Do Not Disturb in "On".  Turn it off.
    Your mute button is "On".  (If it's on, the slider near the volume buttons would display a red area.)  Turn it off.

  • TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

    Restating my issue / question...
    When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
    Hence, I have ruled out the issue is a yahoo mail matter.
    Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
    Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
    Any ideas?
    GMc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I hve unlocked iphone and got walmart family mobile. I was issued a phone number initially with phone and then I had them change it. Now when I send texts caller id people see is the original phone number, and when I call it is the new number.

    I have unlocked iphone and got walmart family mobile. I was issued a phone number initially then asked for a different one. Now when I send text messages, they show up the original number, but when I make phone calls, the id shows up the new number, I can recieve text messages to both numbers. If you try to call the first number it says it is not a working number. On my phone, if I go under "about" it says "my phone number" and it says the second number, under settings, and messaging, it says that I send and recieve messages from the original one. T-mobile, has no idea why this is happening and has tried everything to fix it

    This is for iMessages only, not for text messages as in SMS/MMS.
    Settings > Messages > Send & Receive > Apple ID.
    Select your Apple ID and at the menu window that appears, select Sign Out.
    Turn iMessage off at Settings > Messages > iMessage.
    Then follow these instructions.
    You can remove an iPhone from your support profile by following these steps.
    Step 1: Click on this link to open the login window of your support profile.
    Step 2: Log into the website using your Apple ID – same as your iTunes login.
    Step 3: Click on the button ‘Edit products’ and select the iPhone that you want to remove from the list.
    Step 4: Click on the arrow behind the product, and then click on the button ‘Unregister’ to delete the iPhone from your support profile.
    After you unregister your iPhone, on your iPhone go to Settings > Messages > iMessage and turn iMessage on.
    Go to Settings < Messages > Send & Receive > Apple ID. Sign back in with your Apple ID.
    This should re-register your iPhone with your Apple ID with iMessage with the new phone number only.

  • Why won't my iPhone 4s quit ringing for no reason?

    My iPhone 4s hasn't quit beeping and ringing as if I had a message since I updated it to the new operating system. I check my messages and yet I don't have any new. Does anyone know why or how to fix this bug?

    What have you done to troubleshoot?
    Have you reset your network settings?
    Have you taken the basic troubleshooting steps recommended in the User Guide?

  • Since installing iOS 7 my 4s iPhone does not ring for all callers. I receive some calls ok, others never ring even tho I know someone was tryine to reach me. This is very frustrating!

    I discovered this issue when a friend of mine called my home phone to tell me that when he called my cell phone it sent him directly to the messinging service.
    It never even rang. It was like the phone was off. And that is NOT the case as my phone is always ON, at all times.
    I could call my iPhone with my wife's iPhone, and hers would ring through. I could call my iPhone from my home phone, and it would ring my iPhone
    But many other people who have tried to reach me don't have any luck, even when I'm listeneing to hear the ring and pick up. It never rings. Just leaves
    a note saying "missed call" and maybe a message, if the caller left one.
    Very frustrating for me. I could sure use some assistance!
    Thanks,
    Ezryder

    Thanks for your answer...
    My iPhone was connected to a wifi internet when I tried to activate it and when I tried activation by iTunes I was using my laptop with windows 7 which was connected to internet by cable.
    I updated my iPhone to IOS 7 when I was in Egypt and I had no problems with updating it and I can't remember if finding my iPhone option was on or off before updating to IOS 7 and as i understood from searching internet that to use iCloud Finder on web from computer to find my iPhone it should be set up already on my iPhone and I didn't set up iCloud on my iPhone before and my Apple ID wasn't verified for iCloud till today, I verfied it by logging in iCloud from a friend iPad.
    I was considering already the option that my iPhone has been hacked but if this happened so how I would unlock my iPhone and activate it to back to work? who would help me with that? I'm so tired of being without my phone for almost 4 days and I started to consider not having any Apple product anymore... I think that this way to secure the consumer has a lot of conflicts...

Maybe you are looking for