My iphone wont boot is just displays the apple logo and some small typing
My iphone is frozen and is only displaying the black screen with the apple logo with some small white text
This is what I am referring to. See the red circle. This is when responding to this forum.
Try this support document for when you cannot update or restore. See if that helps you. http://support.apple.com/kb/HT1808
Similar Messages
-
I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?
Hello there, Shaneol10.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
It has been on this black screen with the apple logo and some small white writing at the top of the screen for many hours. I've tried rebooting it and connecting to iTunes but nothing has worked.
PLEASE HELP!!!!!!!!It likely means there was still water inside it and something has now shorted out and permanently damaged one or more components. THE very worst thing you can do with wet electronics is energize them - even a small drop of water inside on any of the circuitry or electrical contacts can cause catastrophic damage.
Take it to Apple for a free evaluation, but most likely you will need to replace it. For the out of warranty fee ($269.00 USD) you will get a refurbished replacement (like new, with a factory new screen and battery). An out of warranty replacement will also re-instate your remaining warranty, or 90 days warranty, whichever is longer. -
I installed the latest update of Mavericks from the App Store today and after restarting my system it doesn't go beyond the Apple logo and the spinning wheel. I tried resetting the NVRAM but it still has the same problem.
1. Startup in Safe Mode
http://support.apple.com/kb/PH14204
2. Repair Disk.
Steps 1 through 7
http://support.apple.com/kb/PH5836 -
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore -
ANY IDEAS WHAT I CAN DO
Mike19981 wrote:
I just updated my phone today to ios 7 a iphone 4s once it turned on it wouldnt boot past the apple logo
Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I updated my IOS and now my phone no longer works. All I get is the Apple logobuntil the battery dies. Any suggestions?
Charge the battery for several hours. Then reset by holding the on/off and home buttons together for about 10 seconds till the Apple logo appears.
If you then see the USB cable and an iTunes display, follow the direction and plug your iPhone into iTunes. -
My mac won't turn on again, it just shows the apple logo and some code
My mac was freezing up a bit while trying to get onto lanaboards.com so I decided to restart it. I figured i might as well update it at the same time. So i did that and chose the restart option that comes up when you update. It seemed like the update went through, but then it told me that it couldn't update but i was asked if i wanted to restart it, so i did. For some reason it didn't restart for a couple of minutes so i turned it off by pressing the on/off button. When i turned it back on it made the sound and then the grey background with the Apple logo appeared. Suddenly this code comes up using the word "panic" a couple of times. I'm not gonna type the whole thing cause it's kina long. It also says "Mac OS version: not yet set" (maybe cause i tried to update?) and "Kernel version: David Kernel version 12.2.1" It also says "debugger called: <panic>"
I won't be able to get it to the apple store for a week because everything closes down on thursday because of Easter and the buses seem to not go tomorrow and no one can drive me. I hope there's something i can do cause i have an important exam (100% of my grade) in two weeks so I'm freaking out a bit here. I also have some stuff due next week that just went up.
I really hope someone can help me, or at least know what may be the problem.
PS. I'm not 100% sure which operating system I have so i chose what i assume is the second newest iOS cause I know i have iOS at least
PS 2: My hard disc crashed about two months ago and was fixed at my local apple supplier, if that may have anything to do with the matter.you are not in MacBook Pro forum, so might be harder to swap out and replace hard drive but you should definitely have had them do that or even yourself.
Make sure you are at least using TimeMachine AND another backup method to clone your system drive so you always have a working 'spare' backup drive you can boot and work from - USB3 is good, TimeMachine even works decently for some on USB 2.0
Finding out why and troubleshooting a panic is a matter of trial and error after taking a look at what hardware, what software you installed (and some of which should be removed), even whether it is triggered by heat from processor or RAM (memory) errors, and memory errors can be triggered by software.
Reset SMC
http://support.apple.com/kb/HT3964
Resetting NVRAM
http://support.apple.com/kb/HT1379
Safe Mac Guide
http://www.reedcorner.net/mpg/
About Mac OS X Kernel Panics:
http://support.apple.com/kb/TS3742
Resolving Kernal Panics
http://www.thexlab.com/faqs/kernelpanics.html
http://reviews.cnet.com/8301-13727_7-10344626-263.html
http://macs.about.com/od/usingyourmac/qt/Troubleshooting-Os-X-Kernel-Panics.htm
http://support.apple.com/kb/TS3742
There’s trouble in my laptop paradise. I ended that with this caveat:
It’s much more comfortable to type on the 2011 model, with one big exception: the 2011 model runs much hotter.
I need more time to form a concrete opinion, but it seems so far that this CPU’s awesome performance definitely comes at a cost of increased heat and reduced battery life. For my intended usage as a desktop most of the time, that’s an acceptable tradeoff.
This turned out to be worse than I thought it would be, and today, the last day of my return period, I decided to return it and exchange it for a slower model.
The problem
Not only does the 2011 15” MacBook Pro run much hotter than previous generations, but as a result, the fans very frequently kick up to full speed (6200 RPM), greatly annoying anyone in the area who’s not wearing headphones.
I’ve done a lot of Google research and impromptu Twitter surveys, and this seems like a very common problem, exacerbated by a number of factors:
The quad-core i7 CPUs in the 15” run very hot, with a TDP of 45W, 10W higher than the previous dual-cores. Many people speculate that the 15” case and fan design just isn’t designed for CPUs that need this much cooling regularly.
The Core i7 CPU can use Intel’s Turbo Boost to dramatically overclock one CPU core to handle single-threaded loads whenever power and heat allow. It therefore hits its maximum TDP often when just one core is being maxed out, such as when Spotlight or Backblaze index new files, or when Time Machine is backing up.
The 2.2 and 2.3 GHz 15” models come with an AMD Radeon HD 6750M GPU, which adds significant heat. Modern 15” MacBook Pros dynamically switch between the low-powered Intel integrated GPU and the high-powered (and hot) AMD GPU as needed by applications, but the AMD GPU will always be used when an external monitor is connected — the Intel integrated GPU cannot output video over the Thunderbolt port in the 15”. (Oddly, it can in the 13” MacBook Pro and both MacBook Airs.)
It generates so much heat that it can’t be used in “clamshell mode” (closed, but with an external keyboard, mouse, and monitor attached), which has reduced airflow, without risking overheating, kernel panics, and possible long-term damage. I can’t see why Apple even enabled clamshell mode on it.
Some people report issues with the battery draining while playing a game. The 15” MacBook Pro comes with an 85W power adapter, but when stressing the CPU and GPU (such as when playing a game), the laptop draws about 93W — I don’t know enough about the electronics here to say for sure, but an insufficient power adapter capacity sounds like a plausible reason why the battery might drain under high computational load. If so, this is an embarrassing oversight by Apple.
The thermal paste seems to be very inconsistently applied, or there’s some other common manufacturing defect with the cooling system that varies per laptop. Many, many people reported having these issues and exchanging the laptop for a new one that shows far fewer issues. Many dedicated tinkerers have also reported success after reapplying the thermal compound between the CPU and heatsink, but that requires a very deep, warranty-voiding disassembly that I’m not comfortable doing. (I also haven’t owned thermal paste since 2001.)
Put simply, it sounds like the 2011 15” MacBook Pro has a lot of manufacturing inconsistencies and defects that result in improper cooling. But it also sounds like Apple wedged far too much power draw and heat into an enclosure that’s not designed to properly cool or power these demands. It’s not like Apple to release products like this.
But if I can get one working within my tolerances, it’s still the perfect computer for me right now. So I’m trying.
The attempted solution
Tonight, after requesting the return on my 2.3, I ordered a new, slower model that’s likely to run cooler with less fan noise. It’s the base-model 15”, but with an antiglare (matte) display added:
AMD Radeon HD 6490M: It’s manufactured on the same 40nm process as the 6750M, but has far less computational power, so I’m guessing this will result in much lower power consumption and heat.
2.0 GHz quad-core i7: This is the only CPU available with the 6490M. While I don’t expect it to be dramatically cooler-running than the 2.3 since it’s specced with the same 45W TDP, it does have a lower clock and lower Turbo Boost speeds, so I can probably expect an approximately proportional heat reduction.
So I’ll see what happens. I’m not sure what I’ll do if it doesn’t work out. This generation of 15” MacBook Pros has a lot of problems, and Apple really needs next year’s cooler-running Ivy Bridge processors as soon as possible.
http://www.marco.org/2011/09/20/heat-and-fan-issues-with-2011-15-inch-macbook-pr o -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
My ipod touch is frozen wont do anything, but displays the apple logo only
my ipod is frozen wont do anything, but displays the apple logo only
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
My daughter Nano just shows the apple logo and that is it can'y do anything with it.
My daughters Nano just shows the apple logo and that is it we can not do any thing with it.
Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)
-
My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response. Any ideas as to what may be wrong and what I can do?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Absence quota zero after Time Evaluation
Dear friends, We are generating Absence quota automatically after Time evaluation. But CL/PL/SL leave quota generated is zero after TE. Even I am not able to edit Absence quota(IT2006) manually or through IT2013. Please guide me, what needs to be don
-
Control on the release of the back ground jobs
Hello experts, We have a requirement to process a set of jobs in sequence based on a sequence number. It means the first set of jobs with sequence number 1 will all be released at once and they have to get finished for the next set of jobs with the s
-
T60 Wont Suspend... and Freq Control Monitor wont work when add to gp.
Hey guys, I have a lenovo T60, and it cant seem to suspend.. C2D 2.0GHZ ATI X1400 fglrx propriatary driver 7.11 with no compiz.... (waiting untill 7.13) 2gb DDR2 I saw a thread similar to this, but there was no vga=773 or whatever to my kernel in my
-
Link to Action - How to call a DynPro application?
I am new to ABAP Web DynPro. I have a basic question with regards to accessing any dynpro application with Link to Action object. Basically I created a WebDynPro page with some links (Link To Action). On click of these links I want to call another D
-
Hi I have anew z10 on vodafone in the UK. I'm trying to get activesync working to a rackspace hosted exchange 2010 environment. When i first set up the connection it appears ok, emails are shown, calendar is populated, but after a few minutes it all