My iphone wont charge can the charging port be repaired or replaced

my iphone wont charge can the charging port be replaced or repaired

Apple does not repair devices at all.
As stated, you can elect to find a local repair shop to do the work, but understand that Apple does not sell parts either.
Alternatively, you can choose to do an Out of Warranty replacement via Apple and get a 90 day warranty on the replacement device.
Another option would be to replace the device with a more current model.

Similar Messages

  • My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

    My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

    Hello there, Conorjl7.
    The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

    My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

    The port can fail. Internal boards can fail. Batteries can fail. All with the result that no charging occurs. 
    You can try Resetting the System Management Controller and you can try Troubleshooting MagSafe adapters. 
    But usually you will have to take the mac in to a service place for testing.  It can get expensive, although occasionally it is not.
    charlie

  • My Iphone 3gS is not being recognized in Itunes on my laptop. It is charging so the USB port is working properly. My wifes Iphone IS being recognized by the same laptop. My Iphone IS being recognized by the desktop computer and another laptop

    My Iphone is not being recognized in Itunes on my laptop. It is charging, so the USB port is working. My Iphone does work on another Laptop in the house and My wifes Iphone is being recognized on the same laptop that mine is not. Any suggestions?

    The key bit of information here is that one iPhone works on the computer in question and another does not. So it is unlikely that AMDS is not running or there is a driver problem; if either of these was the problem neither phone would be recognized in iTunes.
    Unfortunately, I don't have an answer either. Except to verify that both iPhones (the one that works and the one that doesn't) use the same cable and the same USB port.
    Also, are the two iPhones the same model and same iOS version?

  • Can iphone be left in the charger overnight

    can iphone be left in the charger overnight?

    I'm pretty sure you can't overcharge a BB either, at least not one in the past 5 years or so.  The vast majority of existing rechargeable consumer devices are self-regulating.

  • My ipad2 won't Charge but the charger works on an Iphone? It is also in Restore Mode?

    My Ipad2 wont charge but the charger works on an iphone, the ipad is in restore mode and its telling me to connect it to itunes every few minutes. When I connect it to itunes it works for a minute or two but then turns itself back to the screen with low battery (saying it needs to be on charge). But then it says it need to be connected to itunes again! Help? How can I fix this?

    If you connect by WiFi, put the charger in the iPad.
    If you connect by cable, try an other USB port, and/or use another cable.

  • I dropped my ipod in a toliet and now it wont work off the charger, help? PLEASE

    i dropped my ipod gen 2 in the toilet a few years ago and i thought it was totally gone. my dad told me 2 keep it so we could fix it but we completely forgot about it. i pluged it into the charger and it showed the apple logo for awhile and then turned on. i left it on the charger till it was fully charged. when i pulled it off the charger, it turned completely off and wouldnt turn back on till i pluged it back in. then it showed the logo and turned back on. ive done that like 10 times and it wont work off the charger. is there any way 2 make it work without takin it 2 the shop? ive already reset all the setting on my ipod and it didnt help. ill try anything 2 get this ipod working, so please HELP!

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. However,it may not be worth it for a 2G iPod. Might just trash it.
    Apple Retail Store - Genius Bar                                     

  • My phone fell in water and I put it in rice and everything works but now I can't get the charger in the charging thing. Like it won't go in... What do I do?

    I had my iPhone 5c in my pocket the other day and it fell in the toilet... I was mortified. I immediately grabbed it out and ran and got a bowl of rice and stuck it in. Siri was going crazy all night cause the home button wasn't working so I turned it off for the night. When I turned it on she was working perfectly! Until today when I tried to plug in the charger. The charger just will not go in! I don't know if rice got stuck in there or what but I do not know what to do! Please give me some suggestions guys!!! Also hopefully cheap cause I don't have the money to pay for a new one lols... Thank you

    First of all, you are fortunate that everything works.  Secondly, I agree that rice may be the culprit in the charging port.  However there is a chance that your trying to fix it could actually harm the port and cost you, so I suggest you first get under a bright light and use a magnifying glass to see exactly what and where the obstruction is.  Attempting to connect the charging cable has probably already forced the obstructing substance further down into the port.  Obviously the port is small and will require some kind of tool to help you remove whatever is in there.  I suggest a plastic toothpick that is not likely to break and shouldn't do damage to the contacts.  Tweezers may be useful but if utilized be very cautious not to scrape anything if at all possible. 

  • What happens if an iPhone charger receive a high voltage, would the iPhone get burnt or the charger?

    What happens if an iPhone charger receive a high voltage, would the iPhone get burnt or the charger?

    "If I charged my iPhone with a charger and the electric voltage was 260V"
    Why would you do that?  The power adapter has protective circuits at both the input and output.  If you attached 260VAC to the input, it is likely to shut down, and can be reset by unplugging the power adapter, and plugging it into an AC outlet with the proper voltage.  I'm sure you have plenty of follow-on questions ("how about 400VAC, 2000VAC, a million billion trillion volts AC), and I won't entertain those.

  • Why my iphone wont open after over charged?

    why my iphone wont open after over charged?

    @alexsport17
    Explain won't open?  Do you mean power on or slide to unlock?

  • Can the charger used in the US be used in Italy?

    Can the charger used in the US also be used in Italy?

    Yes if an Apple genuine charger ,you just need a pin converter for plug to fit European sockets
    Apple Chargers are 100-240 v 50/60hz ie world wide

  • Can the Charge with a case fit in the Samsung media dock? or do I have to take the case off?

    can the Charge with a case fit in the Samsung media dock? or do I have to take the case off?
    thanks!

    Dear SandraW,
    Of course, there are may cases out there for the Charge but I would have to say generally, no. I have the desk dock and it looks like the Charge fits very snugly into the dock, and that the seat molded into the dock for the phone is an exact match for the side profile of the Charge.
    I have the shell/holster case for the Charge that is standard VZW accessory, and having the Charge in the shell portion of the case would prevent it from docking.
    I do have a Skin-It skin on the back of the phone, and this does NOT prevent docking.

  • My iPad won't charge using the charger brick

    My iPad won't charge using the charger brick

    you can try giving your device a reset and see if that helps. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try. If that doesn't fix it, then time to move onto other trouble shooting.
    Usually if an iPad won't charge (presuming you're using the supplied charger plugged into the wall), it's:
    bad brick
    bad cable
    bad outlet
    bad port on the iPad
    you can eliminate the first three by swapping out chargers if you have another, swapping out cables and trying a different outlet. If you do that and eliminate the first three, then it may be the port on your iPad. If so, and your iPad is still under warranty, make an appointment at your local apple store and take it in.

  • My iPad will not charge with the charger or plugged into my laptop

    I Have an iPad Air that will not charge with the charger plugged into a socket or the MacBook?

    Hi Joanefrommaldon,
    If the battery on your iPad is not charging, then I'd like you to please follow the steps in the article below.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Macbook won't take charge from the charger it came with.  But WILL take a charge from older generation chargers.

    My Macbook will only charge from an older model charger.  The charger that came with the laptop, after the computer overheated dramatically, is suddenly not working.  The weird thing is, the Apple store tried several chargers out just now, including a brand new one, and what we discovered is that the older model chargers work fine, but the newer model chargers (which used to work perfectly) are indeed recognized by the Macbook (there is a little plug/'charging' symbol in the top right) but there is also a message next to the symbol, in parenthesis, stating that the Macbook is "Not Charging".  Any idea what this could mean?  The Apple store said the computer passed all of their rigorous tests... but obviously something is wrong... so they gave me two options: they could either replace the Magsafe unit ($50), or they could send the computer to the "Depot" to have any parts that are malfunctioning changed at one flat fee ($280).  What do I do?  Because I don't want to pay $280 for a new Magsafe unit when I can get it for $50.  But if this is a logic board problem, then obviously I should send it in to the Depot-- but what if they run more tests and decide the logic board is fine?  Any advice would be greatly appreciated.  Thanks.

    my ginger,
    I did the shift-control-option + power SMU reset.  (My Macbook has an internal battery so I couldn't remove it.)  Nothing changed as a result of that though. 
    I checked to see if the battery and adapter are being recognized.  This is what it said (cut-and-pasted below).  Let me know what you think. 
    I wonder if the wattage difference in the adapters is what is making the difference... And if so, what that might mean in terms of damage done.  Hmmm. 
    Thanks again for your help.  Much appreciated.
    Battery Information:
      Model Information:
      Serial Number:          W0952KWJU9X7A
      Manufacturer:          SMP
      Device name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0103
      Hardware Revision:          000a
      Cell Revision:          0130
      Charge Information:
      Charge remaining (mAh):          3760
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          4684
      Health Information:
      Cycle count:          442
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          126
      Voltage (mV):          12054
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          10
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          2
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0000
      Wattage (W):          0
      Revision:          0x0000
      Family:          0x0000
      Serial Number:          0x00000000
      Charging:          No

Maybe you are looking for

  • Problem with photos on dvd output

    Not sure where the kink is in my process, exactly, but maybe someone will have run into this before... i'm working with hi-res photos in my FCP sequences mixed with HDV video. I've been using the motion tab to resize and everything looks fine in fina

  • SAP WM 6.1 : Barcode Scanning Time&Date stamp capture

    Hi Experts, Our client have new requirement: we enable the Barcode scanning functionality for Functional Location in Notification screen, when user scan the functional location we need capture the time & date stamp also.   I am able to capture the fu

  • Error loading Java Stored Procedure

    When I attempt to deploy a java stored procedure using JDeveloper I get the following error: "ORA-29545: badly formed class: User has attempted to load a class (TestingJava.Testerama) into a restricted package. Permission can be granted using dbms_ja

  • ACR 5.5 RC: Cannot add metadata to E-P1 ORFs shot in July

    This is weird.  I am able to add metadata to ORFs from my E-P1 if they were shot this month (August), creating XMP sidecar files for each.  However, when I select an ORF from July, and select "Append Metadata" from the dropdown menu in the metadata p

  • Adobe Updater is blank, won't respond

    On my work computer running CS3 on WinXP, the Adobe Updater keeps running each time I restart a program in the suite. There are no updates listed in it, and the Preferences button and Remind Me Later button do nothing. Since this was a new installati