My iPhone wont recognize Airport Express as wireless network. Any Suggestions?

Yes, I have wireless turned on. My phone sees my AT&T router from the basement, but it doesn't see the AE at my feet.

Is the AE operating at 802.11n Mode ? If yes, then iPhone will not recognize it...

Similar Messages

Mac G5 (OS X.3) wont recognize airport express base station.

When I use AirPort Express setup, the base station doesn't even get recognized, even when it is in the same room. The base station flashes yellow.
I am using a Linsys WRT54G wireless router to connect to Comcast. Is there some other setting I need to adjust to get my computer to recognize the base station?
Thanks!

I suggest you follow the instructions posted here by David Lovell, which will help guide you through the process of configuring your Airport Express to join the existing wireless network created by your WRT54G. And yes, these instructions work equally well for Macs or PCs.
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT

Airport Express Join Wireless Network Disables Ethernet

I have one of the the older Airport Express (firmware 6.3) and I'm trying to use it to connect a non-wireless machine to an existing network.
Act as a single Wi-Fi interface to any computer or almost any other devices such as game consoles that has an Ethernet port but doesn't itself have built-in Wi-Fi
If I choose "join a wireless network" it appears to disable the ethenet port. Any ideas what I might be doing wrong.
My Setup
ADSL Modem ------ Time Capsule ---[wireless-g]--- Airport Express ---[ethernet]---Computer

Unfortunately, the Ethernet port is disabled when you configure the older AirPort Express version that you have to "join a wireless network"
It can be enabled in the newer 802.11n version, which uses firmware 7.x.x. Sorry, not possible up update the Express that you have since hardware changes were made in the 802.11n model.

Airport Express extending wireless network issue in bridge mode

Hi,
I have an Airport Extreme (AX) connected to a Cable modem, and it is acting as a router and a DHCP server. To extend the wireless range I'm using an Airport express (AE) connected to the Airport Extreme using a wired gigabit ethernet connection.
I'm trying to set the AE in bridge mode as I don't want to setup another network segment and wireless network, I just want to use the AX as the DHCP server. Unfortunately, this doesn't seem to work. In this mode, the clients connected to the AE wirelessly can't get an IP address, and even when using a fixed IP address, it can't ping the AX router.
The only way I can set it to work is to set the AE to share a public address and create a new wireless network with a different name.
Original wireless network IP address: 192.168.0.x
Second wireless network IP address: 10.0.0.x
This gives a double NAT warning which I have to disable.
I've tried rolling back the firmware of the AE to 7.4.2 and that didn't seem to help.
Details:
Airport Extreme (Simultaneous Dual-Band II) - running 7.5.2
Airport Express (Wireless N) - 7.5.2 and 7.4.2

but I can't find an option to configure the AE as a "roaming network"
There isn't one. It's a term used to describe a particular type of setup.
Check your ethernet cable for proper operation by connecting a laptop. Turn off wireless on the laptop and make sure that you can get a good Internet connection. If you can, this confirms that the ethernet cable is working correctly. If you can not, you need to trobleshoot the ethernet connection first before you go any further.
On your AirPort Express, check your settings using AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as your main router
No check mark needed next to Allow this network to be extended
Radio Mode = 802.11n (802.11b/g compatible) a good choice. Your call here
Channel = Automatic (No need to manually set the channels on either router, but you can if you want)
Wireless Security = Same setting as your main network
Wireless Password = Same password as your main network
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and the Express will restart in 40-45 seconds. You should have a green light. Important....now you need to restart your entire network.
Power everything down, order is not important. Start the modem first, let it run a few moments by itself. Then start your main router the same way. Then start all other devices the same way.

Can Apple TV replace Airport Express as wireless network extender?

I currently have a 1TB Time Capsule plus an Airport Express 802.11n 5Ghz setup as a wireless network extender to the TC. I also use AirTunes on the AE tied into our home theater system. I'm contemplating purchasing an Apple TV and cannot figure out (after browsing forums and Apple.com) if the Apple TV can fully replace the Airport Express for both AirTunes AND as my wireless network extender? In other words, if I buy the Apple TV to I need to have it serve side-by-side with the AE, or can I move the AE to another location to even further extend the network range? Many thanks for any help on this topic!

Yes, that's correct. However, the OP wasn't asking if they could do that. They wanted to use the ATV to extend the network to other devices, and it won't do that. It will connect to the network even if the network runs off a single computer as a opposed to a router. But devices not connected to the computer or router can't connect to the ATV.

AirPort Express Extend Wireless Networks (Multiple)

I've got an AirPort Extreme with these wireless networks:
AirPort Network
AirPort Network 5GHz
AirPort Guest Network
I've also got an AirPort Express which I would like to extend these wireless networks with (at least the first two), however the settings only allow me to select one of these wireless network.
I considered connecting the two AirPorts via ethernet, but then thought the two wireless networks would likely clash?
If anyone could advice me as to what I should do, that would be perfect, many thanks.

I've also got an AirPort Express which I would like to extend these wireless networks with (at least the first two), however the settings only allow me to select one of these wireless network.
If you have a "new" AirPort Express with dual band wireless capability, it will both bands using wireless only if you use the same wireless network name for both the 2.4 GHz and 5 GHz network on the main AirPort Extreme.
The Guest Network cannot be extended.
If you do have the option to connect the AirPort Express using Ethernet, it can certainly be configured to provide more wireless coverage that way. The networks will not "clash".

By creating wireless network with Airport Express, original wireless network stops functioning

I want to use the Airport Express to create a second wireless network downstairs. Upstairs I already have a wireless modem/router (Draytek 2850). The signal downstairs however is to weak. When I create the wireless network on the Airport Express, this works perfectly. However after the creation, the wireless part of the Draytek modem/router stops functioning. The wired part keeps working, but when I connect to the wireless part I access anything. Why is that?
The Express is set to Bridge modus and under TCP/IP I've selected that the IPV4 configurations has to go via DHCP.

I set the Network Name the same as the SSID, security type on the router is Mixed(WPA/WPA2)/PSK, which on the AX is WPA/WPA2 - personal I guess. The password is the same as the DrayTek.
Yes, WPA/WPA2 Personal on the AX is the same as the Draytek's wireless security option.
The radio channel of the Draytek router is 6, the channel of the AX is 11. Do I miss anything here?
No, it looks like you have all of the right settings as far as I can tell ... and you already stated that the AX is in bridge mode, i.e., Connection Sharing = Off (Bridge Mode) ... correct?
If so, I would recommend performing a complete power recycle of your networking components, as follows:
Power-down the DrayTek, and AX. Order is not critical.
Power-up the DrayTek; wait at least 10-15 minutes to allow it to stablize.
Before powering-up the AX, verify that you can gain Internet access via a wireless connection to the DrayTek. If so, continue.
Power-up (plug-in) the AX; wait at least 5-10 minutes to allow it to stablize. It should have a steady green status light. If not, use the AirPort Utility to determine the reasons why it doesn't from the Status page of the Utility.

Airport Express! wireless network connection promp need Help!

First time user cant hook up to my wireless network just bought airport express to extend my my network but I keep on get an error say that my wireless network connection is valid any help anyone please on the brink of giving up!

Hi, yonhtna. Welcome to the forums!
Would you mind answering a few questions? I need a little more information about your network setup and about the exact nature of the problem.
1) What type of router is your main router?
2) Do you plan on using the Express to extend the range of your network, or are you only going to be using it for AirTunes or printer sharing?
3) When and where do you see the error message? If possible, can you provide the exact wording?
4) Is AirPort Utility able to find the Express?

HT1515 Mavericks does not anymore support former versions of Airport Express Setup tool. Any suggestion ?

Maverick's Airport Express setup tool (>= v6) is no longer supporting old versions of Airport Express device.
I could not notice this limitation before moving to Mavericks, and so far, I have no other alternative than buying a more recent version of Airport Express to be able to reconfigure it to fit in my new home wifi configuration.
Is anyone facing the same issue ?
Such an obsolescence planning is unacceptable from Apple. They shoud solve this mistake through a new release of the Airport Express configuration tool, but at this point I'm not really sure they will do it one day...
Is anyone also frustrated or upset with this ?
Thanks,
Philippe.

There are literally hundreds of posts on this topic that offer a number of solutions. You may want to search the Discussions forum to access them ... and yes, there are a number of frustrated users due to this.
Basically you have the following choices:
Use a Mac running an earlier OS X version that supports v5.6 of the AirPort Utility.
Run a virtual machine on your Mac that is running an earlier OS X version.
Use a Windows-based PC.
Update to a newer base station.
There are also a couple of other solutions / "hacks" that involve Terminal edits or using script files that are not supported by Apple.

I have a iphone 4 but it was on another network any suggestions

i have a iphone 4 but it was on another network and theyare no nolonger any suggestions what i can do to make this phone work

You need to go to the original network and ask them to unlock it, for you to be able to use it on another network.

My iMac will not display my wireless networks, any suggestions?

I have 3 wireless netowrks in my house. My iMac will only display the one that is for my home automation system and it is not connected to the internet. Any suggestions on this? When I click the wireless icon at the top it only shows 1 network, it won't display my other network or my neighbours networks. When I try to add one of the other networks in my house, it will not find them.

Wireless Diagnostics - About
Also try turning off Bluetooth

TS1398 I cant get the phone to joing my wireless network any suggestions?

Suggestions?

Maybe try settngs - general - reset - reset network settings. Is anything recognized? Did you have a connection before? Go to settings - wi-fi - press the arrow on the network and select 'forget this network'. then try to reconnect. Turn off your router then turn back on.

HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do? Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone. I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address. I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Can't find Airport Express via wireless or wired connection.

I've run across this topic in this forum and a lot of others and nothing I've found has helped resolve the issue. It seems like the one definitive answer I found was to return it to the store, but I'm hoping to avoid that so I figured I'd try once more.
Running Windows XP and using a linksys Wireless-G network card. When I first got the Airport Express I was able to connect to it but then I had some issues with my cable network connection and had to reset everything. Since then I haven't been able to connect to it, and currently I can't find it using the Base Station. Tried resetting it to factory defaults about 10x and I'm still stuck on blinking yellow. I tried connecting it directly with a network cable and even then my computer can't seem to find it.
I tried turning off my firewall, reinstalling the Airport Utility, connecting to the IP address 10.0.1.1 using the "Configure Other..." box and no luck.
Any suggestions?
Thanks much.

The issue is within the network configuration of the Airport Express. As you mentioned, all hardwired devices can use AirPlay but all wireless devices can't.
Normally, the Airport Express will wirelessly join your existing network, and Airplay will work with all devices. Any reason why you have your Airport Express connected to your router via ethernet?

TS1538 iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs

iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs itunes???

Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

My iPhone wont recognize Airport Express as wireless network. Any Suggestions?

Similar Messages

Maybe you are looking for