My iphone wont turn on and the power button is not functioning

my iphonw wont turn on and the power button is not functioning

If your power button is broken, there's not much you can do. You could go to an Apple store & do an out of warranty exchange...Apple doesn't fix iPhones, they replace them. But, I wouldn't recommend doing so, as the iPhone 3G was discontinued almost three years ago & won't run most apps in the app store.
You'd be better served by selling it for parts & using the money to purchase a new phone.

Similar Messages

  • My iPhone's flash wont turn off and the Power button is not working

    Ealier today, my iPhone got wet from the rain, my camera started to malfuction and the flash or the LED light stayed on throughout the whole afternoon. I couldn't turn it off and it just ran out of battery.

    If your power button is broken, there's not much you can do. You could go to an Apple store & do an out of warranty exchange...Apple doesn't fix iPhones, they replace them. But, I wouldn't recommend doing so, as the iPhone 3G was discontinued almost three years ago & won't run most apps in the app store.
    You'd be better served by selling it for parts & using the money to purchase a new phone.

  • Ipod touch wont turn on and the power button is broken. Itunes also doesn't recognize my ipod and I haven't trusted my laptop. PLEASE HELP

    My ipod touch turned off while I was asleep and I don't know what to do. My power button is stuck so I can't do anything about it. Please help me!!
    Ipod touch 4th generation
    8gb

    - Make an appointment at the Genius Bar of an Apple store. Yo have a hardware problem other than the Home button
      Apple Retail Store - Genius Bar

  • My iPhone 5 is disabled and the power button doesn't work. How would I fix it?

    My iPhone 5 is disabled and the power button doesn't work. How would I fix it? Please Help

    wait it for your iPhone to die then before it turns it plug it into iTunes while holding the home button and it will force it into recovery mode.
    will be hard to get the timing right cause u will need to wait for the battery to die and charge up again. Other then that just take it to apple and have them replace the device for a fee.

  • HT1212 When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    No. You need a computer with iTunes and an internet connection.
    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I need to hard reset a Palm TX but the Power button does not function.

    I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
    Post relates to: Palm TX

    Hi,
    PowerBtn from the Canuck Software HomePage.
    NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
    http://www.canuck-software.ca/
    PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
    This setting will remain active while 'Enable' on the PowerBtn screen is active.
    The user can select 'Disable' on the PowerBtn screen.
    The setting will survive a Soft Reset. (Hi PG )
    If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
    The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
    The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
    NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
    If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
    You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
    All the best, woz of oz
    Post relates to: Palm TX

  • I have i phone 4 from verizon and the power button is not working

    I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone  8 months ago.
    What options do I have and what should I do ?

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • My ipad has a black screen and the power button is not working. Help!

    This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago  when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?

    Have you tried to give it a reset?
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.

  • What does it mean , when my iphone wont turn on and the apple symbol keeps flashing

    my iphone wont reboot or turn on and the apple symbol just keeps poping up

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I got a new apple iPhone 6 today and the power button is not responding after functioning for some time

    i got a new iPhone 6 today itself . i didn't put a sim in it. and after few start ups the power button stopped responding can anyone please help me with that

    Take the issue up with whomever replaced the device, whether that is Apple or another company.
    There is nothing that we, your fellow users, in these user to user support forums can do for you.

  • Just got my iphone 5 last week and the power button is stuck now what

    is my phone under warranty and can anything be done?

    If there's no evidence of user damage (like you dropped it and that's why the power button is stuck), then your phone will be replaced without charge.

  • My IPhone 4S wont turn on and the lock button has broke

    I was using my phone fine but then it switched itself off and won't come back on, its not connecting to Itunes and will not charge, I've read loads of things about holding down the home and sleep button at the same time but my sleep button doesnt work.
    Can anyone help me please?

    If the iPhone doesn't power on automatically when connected to a power source and the on/off button is broken, you won't be able to power it on. Make an appointment at an Apple store if there is one nearby.

  • I need help, My ipod wont turn on, and the home button doesnt work, what do i do?

    My ipod just shut off and wont turn on, i need help, but my home button is broken. can anyone help

    Try:
    Turn on without Home/Power Button

  • My iPhone won't charge and the sleep button does not work, Please Help!

    I woke up this morning and my iphone was dead. I have been using the assisted touch setting because one day for no particular reason my sleep button stopped working, so I can't even try a hard reset now.  The phone never had a bad drop and the only way it could be water damaged is from being in a steamy bathroom. If anyone has a suggestion as to how to get my phone to work again, Please leave a suggestion!!
    Thank you

    It could be that your button has justy gone out.  You may try getting compressed air to blow out any dust in there.  If that doesn't work, you may have to get your button and ribbon replaced.

  • Iphone wont turn on and my sleep button doesnt work

    when i put my phone on the charger it says its charging but apparently doesnt. ive had it on the charger for hours and i cant reset it because my sleep button doesnt work

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Also try:                                               
    - iOS: Not responding or does not turn on           
    Whenit says place the iPOd in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Replacing a root pool disk example

    Replacing a root pool disk has several use cases: 1. Replace a small disk with a larger disk 2. Replace a failed disk with a replacement disk 3. Outright move a rpool to a different disk because you want to The easiest way is to attach the replacemen

  • Problem in conversion from alv grid to excel

    Hi all,          I have alv report output, when i am converting it to excel format sometimes it shows each column names twice and sometimes column names are not arranged in proper order.... any solution to this type of problem??? thnx.

  • How to change the image in SAP network graphics

    In my development with SAP network graphics, I found it difficult to change the image displayed in SAP network graphics. and i define the image path in IMG, it doesn't work. Is there any one who can tell me how to diplay a image in SAP network graphi

  • Exception message in MD04 & MD05

    Hi experts, There is an problem related to exception message, It has been observed that immedeate after MRP run, no other transactions done, I am getting exception message in MD05 for one of the component as "30 - Plan process according to schedule",

  • Timer works if I set the time before the current one

    Hi, I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time Here's the