My iPhone4 docks correctly with some devices but not others, please help!

Hi,
Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
*Phone used to dock fine with anything and everything - this was about 1 year ago.
*for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
*symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
*I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
*I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
*2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
* now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
*just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
to my knowledge it is NOT;
- a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
- a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
-a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
could it be a problem with the data exchange between phone and device when it is docked??
or do I really need to try changing the port for an 'official' one??
or is it just broken and that's that?!

It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

Similar Messages

Text search returns results with some keywords, but not others

This pertains to a tours website for Turkey. I've sucessfully
set up a search form, and results page which returns results when
multiple keywords are entered. Everything is working well, except
when certain keywords are used. For example, the table column being
searched for is called long_itinerary, so if anyone is interested
in a certain site or city, it's bound to be in the long itinerary
somewhere.
Here's the problem, by example: When someone searches with
the keywords Antalya, Konya, Ankara, or Adana, for example, results
are returned from the database, and those keywords are in each
returned tour's long itinerary.
But certain keywords return nothing, even when they're in
practically all of the tours, in the long_itinerary column. For
example, Istanbul, Ephesus, and Izmir, Kusadasi and Pergamum return
no results, even though they're there. I've gone through all of the
most likely keywords, and these are the offenders. If, for example,
I search with "Istanbul Ankara," I get results with tours including
Ankara (and Istanbul, but only because the word "Ankara" is in the
itinerary).
First I made sure the Charset values were the same on the
search form page and the results page. Still had the problem. Next,
I went into the database itself, and copied the word "Istanbul"
directly from the long_itinerary column of the database, and pasted
it into the search function's text field, and searched again. Same
problem--no results returned.
I can't see any difference between the keywords which work
correctly, and those which don't, what baffles me is that even when
I copy a keyword directly from the database and paste it in the
search text field, it returns no results!
Well, I'm baffled! Any ideas what might cause this?

Hmm -- one of my customers is a turkish building company
(Kusadasi BTW), and when *they* add some contents to the DB,
they´ll be entering turkish chars. It´s in particular the
turkish "I" which is pretty different, and this is when a search
for keywords containing a western "I" will fail.
Could that be the problem in your case ?

Airport extreme working on some devices but not others

All of a sudden airport extreme has stopped working on some of our devices. within our family we have an old macbook pro running tiger, a 2nd gen macbook air running snow leopord, a black macbook running lion, a mac mini running lion, two iphone 4s and an iphone 3g. the wireless only works on the two computers running lion. nobody has changed any of the settings on the airport extreme. it is running the latest version and has been working fine up until a couple of days ago. i have reset the modem and router several times each but nothing has helped. when we try to connect the iphones to the wireless they say unable to join network and the computers running snow leopord or older say there was a problem connecting to the network or something similar to that. any help would be appreciated!

I know that you have reset both the modem and AirPort already, but I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL, but recommended) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Officejet Pro 8600 Plus prints with some programs, but not others.

I have a new Officejet Pro 8600 Plus connected with an Apple Airport Extreme. My iPad and Dell will print without problems. My MacBookPro using OS 10.6.8 will print iPhoto and Excell when using Parallels. It will not print using Appleworks or Office for the Mac. The Mac recognizes the printer and will print the test page. When told to print in Appleworks, the computer says it is printing, but nothing is happening.

Hello homeonthefarm,
Welcome to the HP Support Forums!
I understand you are able to print from an iPad and Dell PC with the Officejet 8600, but unable to from your Mac 10.6.8. Since it will print from the other sources it would appear to me that the printer software is not installed correctly on the Mac.
Try uninstalling the printer software, when you are running the HP Uninstaller, just prior to clicking uninstall I would like you to hold down the Control, Option & Command button then click uninstall.
When ready to install the printer, HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8.
I hope this suggestion helps.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69

Ichat video works with some people and not others

Can someone help me? I can video Ichat with some people and not others. HOwever, if the people I can video ichat with put me in a three way chat with someone I can't Icaht video with, it works. Here is the first half of the error I get when I try to call someone with whom it doesn't work:
Date/Time: 2008-05-08 20:59:35.554 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-05-08 20:59:21 -0400: AVChat started with ID 2203145046.
2008-05-08 20:59:21 -0400: scddean8: State change from AVChatNoState to AVChatStateWaiting.
2008-05-08 20:59:21 -0400: 0x1946a450: State change from AVChatNoState to AVChatStateInvited.
2008-05-08 20:59:24 -0400: 0x1946a450: State change from AVChatStateInvited to AVChatStateConnecting.
2008-05-08 20:59:24 -0400: scddean8: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-05-08 20:59:32 -0400: 0x1946a450: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: 0x1946a450: Error -7 (0x1946a450 cancelled the connection.)
2008-05-08 20:59:32 -0400: scddean8: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: scddean8: Error -7 (0x1946a450 cancelled the connection.)
Video Conference Error Report:
950.806728 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.000000 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK253ca464241b86c5
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 443
v=0
o=SDEAN 0 0 IN IP4 68.109.25.62
s=skiier526121
c=IN IP4 68.109.25.62
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 110
a=rtcp:16402
a=rtpmap:110 X-AAC_LD/22050
a=rtpID:163897054
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:160:120:320:240
a=framerate:20
a=rtpID:4247390608
0.130320 @SIP/Transport.c:347 type=2 (00000000/0)
[ACK sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK758f935e51030677
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.3
Content-Length: 0
0.131540 @SIP/Transport.c:2362 type=1 (00000000/0)
[SUBSCRIBE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.258925 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>;isfocus
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.266139 @SIP/Transport.c:347 type=2 (00000000/0)
[NOTIFY sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]:16402>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.3
Content-Type: application/conference-info+xml
Content-Length: 0
[<c-i v="0" st="f" en="sip:user@lip:16402">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
0.267647 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.3
Content-Length: 0
0.489410 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from 24.9.170.64:16402]
0.809558 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=98115.00, NSDev=6.54%]
1.049428 @:0 type=1 (00000000/1)
[Bandwidth Detection]
[Avg=1063830.90, NSDev=55.48%]
1.396681 @:0 type=1 (00000000/2)
[Bandwidth Detection]
[Avg=1218589.60, NSDev=19.06%]
1.555003 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 8
[SECUPD:0]
1.555264 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
22.411383 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
22.552977 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
23.667085 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
23.667857 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0

I found the following comment the other day that goes some way to explaining why iChat might have problems with some NAT routers:
http://www.technologyevangelist.com/2007/02/ichatav_the_bestun.html#comment-53326
While it doesn't offer any solutions it might be worth firing off some iChat feedback to Apple referencing it. It seems like it might be a trivial bug for Apple to fix and could well alleviate many of the problems people are having.
In the mean time if your router is one that has SIP ALG you could try disabling it and forwarding all relevant ports to your machine.

Why does new 60g ipod download some songs but not others?

I have a lovely new ipod and have inherited my son's itunes library on my XP user account. I removed all the stuff of his that I didn't want and was all set to download 600-odd tracks on to my new ipod. Unfortunately it only transfers about a third of the tracks on each album and unaccountably skips some altogether. Also, it will only transfer 50 or so songs and then "freezes" on a particular track. I then have to close down using Windows Task Manager, re-start the computer and delete the track in question before the repeating the whole miserable process. There must be a better way mustn't there?

Thanks for the suggestions, but I ran updater and installed the latest itunes yesterday to no avail. Also I think it's unlikely to be an unsupported file type problem as some tracks and not others are transferred from the same album.

Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
http://support.apple.com/kb/HT1351 for syncing music

Apps on some of our devices but not others

Specifically, we have several Apple devices in our house: My son has a Ipad2 and an old ipod touch(which he never uses ipod since it can not be updated), My Wife has an Ipad2 also(just has more gigs on it), and I have an old ipod that can't be updated, that I now use for my alarm, and a newer one I think its a 5 since it has Siri, but no rear camera. Anyway I had bought "Stickwars" some time back, and it is on my old ipod, and my son's ipad, but after the update is Not on my new ipod. even tried connecting my old ipod up to computer, and it shows it being on the ipod, but not the computer. How can I get this app on to itunes on my computer? I looked under purchased apps and it doesn't show.. ty for any help

the one I am trying to get it one IS a 5. I managed to get it form connecting to our really old computer, now I have a different problem. this computer is the one I mainly use, and just bought some apps and music that I put on the 5th gen one, however now it tells me that this computer isn't auth. for this ipod.(and I letterally just bought this other stuff on it and transferred to this ipod about a week ago) isn't Auth. I even tried removing auth . then giving it again, but no help

Problems with Home Sharing - works with some users but not all

Hi all,
On our Mac we have 3 different user accounts. Among the three, home sharing seems to work for two of them, but not three. For example, if I'm logged into User A's account, I'm able to access the library for users B & C. However, B & C are able to see user A's library, but items do not play or transfer. B & C can use each other's shared libraries without a problem.
Previously, all three users could use the other's libraries. I've done the obvious: restarted the computer, made sure sharing was turned on on all 3 accounts and synced the Apple ID and password on all three iTunes so that they're runing on the same Apple ID account.
The error I get when trying to transfer songs from A to either B or C is: "There was a problem downloading "[song name]". The URL "" could not be found on the server."
We're using iTunes 9.0.2.
Thanks all in advance

click here to learn "how to share music between different accounts on a single computer" and this read about iTunes 9: Understanding Home Sharing
any help ?
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Sound working on some programs but not others (Pavilion dv6 Notebook PC)

The sound is working for some programs (iTunes) on my laptop, but will not work with Chrome, Internet Explorer or BBC iPlayer Downloads.
I'm at a loss to explain why. When I open up the Sound settings on the laptop, I can see that iTunes output plays on the 'Speakers and Dual Headphones' device, which is what I believe all my sound would usually come out from. I can hear it as usual.
However, when I play audio in Chrome, no sound comes out, but it appears the device 'SPDIF (Digital Out via HP Dock)' is now playing the sound instead. The sound bar for this moves up and down while something is playing, but I cannot hear anything at all.
It is as if my internet programs have been configured to have sound output through a device that does not actually exist. I tried fiddling around with Sound settings and 'Disabled' the SPDIF device, but nothing has actually changed. I would like to hook my internet audio back up to the 'Speakers and Dual Headphones' option but cannot work out how to.
Sorry if this is not very well-explained, but I have never dealt with this problem before.
Thank you so much if you're able to help - this is very frustrating!
Edit: I also recently used a new HDMI cable to hook my laptop up to our TV and think this could be something to do with it

Hi PacificBay,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the problems with the sound. Try setting your speakers as the default audio device. What operating system are you using? What is the product number for your Pavilion?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How do I get all of the music on my computer to transfer to my Iphone? For some reason, itunes has picked up some songs but not others. example, I have several CD's loaded in which only 1 or 2 songs from the CD shows up in itunes.

I have about 70 Cd's loaded on my computer as I had previously owned another MP3 device before I got enamored with the Ipad and Iphone. My problem is itunes will not recognize all of this music. To give a specific example, I have an old Bon Jovi Cd "crossroads" , itunes only recognizes 2 songs off the Cd. How can I get itunes to recognize these songs? They do not show up on itunes anywhere but if i go to my music folder I can locate the songs and it even shows the itunes logo but, the songs will not play with itunes. I've got a few hours of music i would like to have on my iphone. Can anyone please help me with this?

It has always been very basic to always maintain a backup copy of your computer for this very occasion.
Use your backup copy to put everything on the computer, then sync.
If for some reason you have failed to maintain a backup, not good, then you can transfer itunes purchases from your iphone to your computer - File>Devices>Transfer Purchases

Citrix XenApp 7.6 & VDI Plugin works for some users but not others

I have a customer with XenApp 7.6 and Lync 2013 SE. They have two users homed to the same pool, both with the same VDI client policy however on one account the VDI pairing works fine over Citrix XenApp, but the other the pairing fails. On both accounts I
get prompted for the credentials, however the second account will not authenticate. I have tried domain\username, domain.local\username and [email protected] but all fail then I get the red cross through the VDI icon.
This is all from the same Windows 7 machine, all user accounts are within the same AD domain.
If anyone has seen similar before any assistance would be greatly appreciated as I am banging my head against the wall!
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

Here is some further info:
360admin - can sign in to Lync and pair correctly
msltest - can sign into Lync but the credentials are not accepted for pairing
Identity : CN=360 Admin,CN=Users,DC=localdomain,DC=co,DC=uk
VoicePolicy :
VoiceRoutingPolicy :
ConferencingPolicy :
PresencePolicy :
DialPlan :
LocationPolicy :
ClientPolicy : HEADSET_USER
ClientVersionPolicy :
ArchivingPolicy :
ExchangeArchivingPolicy : Uninitialized
PinPolicy :
ExternalAccessPolicy :
MobilityPolicy :
PersistentChatPolicy :
UserServicesPolicy :
HostedVoiceMail :
HostedVoicemailPolicy :
HostingProvider : SRV:
RegistrarPool : LyncFEG.localdomain.co.uk
Enabled : True
SipAddress : sip:[email protected]
LineURI : tel:+44**
EnterpriseVoiceEnabled : True
ExUmEnabled : False
HomeServer : CN=Lc Services,CN=Microsoft,CN=1:3,CN=Pools,CN=RTC Se
rvice,CN=Services,CN=Configuration,DC=localdomain,DC=co,D
C=uk
DisplayName : 360 Admin
SamAccountName : 360Admin
PS C:\Users\360admin> Get-CsUser -Identity "msl test"
Identity : CN=MSL Test,DC=localdomain,DC=co,DC=uk
VoicePolicy :
VoiceRoutingPolicy :
ConferencingPolicy :
PresencePolicy :
DialPlan :
LocationPolicy :
ClientPolicy : HEADSET_USER
ClientVersionPolicy :
ArchivingPolicy :
ExchangeArchivingPolicy : Uninitialized
PinPolicy :
ExternalAccessPolicy :
MobilityPolicy :
PersistentChatPolicy :
UserServicesPolicy :
HostedVoiceMail :
HostedVoicemailPolicy :
HostingProvider : SRV:
RegistrarPool : LyncFEG.localdomain.co.uk
Enabled : True
SipAddress : sip:[email protected]
LineURI : tel:+44******
EnterpriseVoiceEnabled : True
ExUmEnabled : False
HomeServer : CN=Lc Services,CN=Microsoft,CN=1:3,CN=Pools,CN=RTC Se
rvice,CN=Services,CN=Configuration,DC=localdomain,DC=co,D
C=uk
DisplayName : MSL Test
SamAccountName : MSLTest
PS C:\Users\360admin> Get-CsClientPolicy
Identity : Tag:HEADSET_USER
PolicyEntry : {}
Description :
AddressBookAvailability : WebSearchOnly
AttendantSafeTransfer :
AutoDiscoveryRetryInterval :
BlockConversationFromFederatedContacts :
CalendarStatePublicationInterval :
ConferenceIMIdleTimeout :
CustomizedHelpUrl :
CustomLinkInErrorMessages :
CustomStateUrl :
DGRefreshInterval :
DisableCalendarPresence :
DisableContactCardOrganizationTab :
DisableEmailComparisonCheck :
DisableEmoticons :
DisableFeedsTab :
DisableFederatedPromptDisplayName :
DisableFreeBusyInfo :
DisableHandsetOnLockedMachine :
DisableMeetingSubjectAndLocation :
DisableHtmlIm :
DisableInkIM :
DisableOneNote12Integration :
DisableOnlineContextualSearch :
DisablePhonePresence :
DisablePICPromptDisplayName :
DisablePoorDeviceWarnings :
DisablePoorNetworkWarnings :
DisablePresenceNote :
DisableRTFIM :
DisableSavingIM :
DisplayPhoto : PhotosFromADOnly
EnableAppearOffline :
EnableCallLogAutoArchiving : True
EnableClientMusicOnHold : False
EnableConversationWindowTabs :
EnableEnterpriseCustomizedHelp :
EnableEventLogging :
EnableExchangeContactSync : True
EnableExchangeDelegateSync :
EnableFullScreenVideo :
EnableHighPerformanceConferencingAppSharing : False
EnableHotdesking :
EnableIMAutoArchiving : True
EnableMediaRedirection : True
EnableNotificationForNewSubscribers :
EnableSkypeUI :
EnableSQMData : False
EnableTracing :
EnableURL :
EnableUnencryptedFileTransfer :
EnableVOIPCallDefault : False
ExcludedContactFolders :
HotdeskingTimeout : 00:05:00
IMWarning :
MAPIPollInterval :
MaximumDGsAllowedInContactList : 10
MaximumNumberOfContacts :
MaxPhotoSizeKB : 30
MusicOnHoldAudioFile :
P2PAppSharingEncryption : Supported
EnableHighPerformanceP2PAppSharing : False
PlayAbbreviatedDialTone :
SearchPrefixFlags :
ShowRecentContacts : True
ShowManagePrivacyRelationships : False
ShowSharepointPhotoEditLink : False
SPSearchInternalURL :
SPSearchExternalURL :
SPSearchCenterInternalURL :
SPSearchCenterExternalURL :
TabURL :
TracingLevel : Light
WebServicePollInterval : 00:01:00
HelpEnvironment :
MSL Test Login
TL_ERROR(TF_SECURITY) [3]21A4.17E8::03/25/2015-22:39:21.107.00005d39 (SIPStack,SIPAdminLog::WriteSecurityEvent:SIPAdminLog.cpp(319))[1363057693] $$begin_record
Text: Failed to validate user credentials
Result-Code: 0x8009030c SEC_E_LOGON_DENIED
Source: LyncEdgeG.localdomain.co.uk:49201
SIP-Start-Line: REGISTER sip:domain.com SIP/2.0
SIP-Call-ID: 2cab650cdf3e4d62aea1cb0c2166c07e
SIP-CSeq: 3 REGISTER
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

At a loss with some simple java classwork. Please help.

Hello. I'm having a problem with some work that I wasn't able to finish in class. I am not very good at java AT ALL, and I'm really at a loss on how to finish up the program and get it to print what I want it to.
My task is:
"Write a program that asks for two words and then eliminates the second word from the first word.
For example:
forgot - go = fort
bedevil - bed = evil
bedevil - evil = bed
stupid - is = Hey, is is not found in stupid."
This is my code so far:
public class wordSubtraction
     public static String big = "bedevil";
     public static String small = "bed";
     public static void main(String[] args)
          elimWord(String big, String small);
     public static void elimWord(String big, String small)
          if(big.indexof(small)==-1)
               System.out.println(small + " isn't found in " + big);
          else
               big.substring(0, indexOf(small));
               small.substring(indexOf(small)+small.length());
               System.out.println(small + " + " + small.substring + " = " + big);
I keep getting this error:
/Users/mewmew/Desktop/wordSubtraction.java:8: ')' expected
          elimWord(String big, String small);
                                ^
1 errorI don't understand what this error means or how to fix it, it looks like I have all the parenthesis in there to me. Deleting or adding semi-colins, parethesis, brackets, or curly brackets just seems to give me more errors.
Any help is appreciated!

No it's not JJEdit. The errors are a good thing -
and each one has to be
dealt with. When you call a String method various
things have to be
correct:
(1) The name of the method - case is important.
(2) The arguments - the things in the parentheses -
have to be exactly
the sort of thing that the method expects. For
example if the method
expects an int argument and you give it a String
there will be problems
(3) The methods must be called using a String
variable and a dot. If
you just say "substring(whatever)" that's an error.
The compiler is
saying "substring of what?" You have to write
"something.substring(whatever)"
Also - because it will be important later - both
substring() and indexOf()
return a value. It is up to you to do something with
that value. Usually
you assign it to a variable.
Just for the record I got the follow from the String
API doumentation here:
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Stri
ng.html
public int indexOf(String str) Returns the index
within this string of the
first occurrence of the specified substring.
public String substring(int beginIndex) Returns a new
string that is a
substring of this string. The substring begins with
the character at the
specified index and extends to the end of this
string.
public String substring(int beginIndex, int
endIndex)Returns a new
string that is a substring of this string. The
substring begins at the
specified beginIndex and extends to the character at
index endIndex - 1.
I would suggest you write elimWord() along these
lines:public static void elimWord(String big,
String small)
int pos = // find the index of small in big
if(pos == -1)
System.out.println(small + " isn't found in "
und in " + big);
else
String before = // find the bit before small
re small in big
String after = // find the bit after small in
small in big
System.out.println(big + " - " + small + " =
ll + " = " + before + after);
Thank you! That's very helpful and I feel that I'm THAT much more on my way to understanding what the heck I'm doing.
I'm trying, though...
Now I just gotta find out how to get the bits before and after small in big and solve these errors:
/Users/audreyeckel/Desktop/wordSubtraction.java:24: '.class' expected
          int pos = big.substring(0, int indexOf(small));
                                               ^
/Users/audreyeckel/Desktop/wordSubtraction.java:24: ')' expected
          int pos = big.substring(0, int indexOf(small));
                                                              ^
2 errorsI just hope I can finish it before it gets TOO late...it's about 2:26 AM here and this is due...TODAY!

My iPhone4 docks correctly with some devices but not others, please help!

Similar Messages

Maybe you are looking for