My iphone4 has been stuck on the connect to itunes logo for a few hours.I connect it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes.I'm afraid that if I restore it I will loose everything help
My iphone4 has been stuck on the connect to itunes logo for a few hours. I connected it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes. I'm afraid that if I restore it I will loose everything help please!!
AT this point whatever data you have on yoru phone is already gone since it is in recovery mode.
However you can restore from your backup, when your phone reboots from recovery.
YOu do have a backup right?
Similar Messages
-
It says that my iphone is in recovery mode and needs to restore. (it is an ipod touch)
It says that my iphone is in recovery mode and i need to restore it, but it isan ipod touch. I cannot restore it because itunes is telling me that the software for the iphone is not currently available. Do I download the software for an iphone?
this happened to me a while ago and im not sure wht to do
-
I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?
That seems to be OK via WLAN!
It ist better to do the first backup via LAN-cable. -
Hi, my iTunes Match has been stuck on "5490 of 5518 songs checked for the last two days." Have tried stopping and restarting it a few times but it always gets stuck in the same place. Any advise on where to go from here?
ttt
-
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
Firefox has been unsuccessfully attempting to download a software update for a few days now... What’s the problem?
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version.<br />
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
after itunes finishes restoring my ipod touch 8gb, itunes still says itunes has detected an ipod touch recovery mode. You must restore it before using it with itunes. and i dont know what to do
Are you sure it is 1043? I've never seen that error before. But you can try disabling your security software, connecting the phone to a USB port directly on the computer (not a hub), and trying to restore again.
-
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?
Hi tgoit2015,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
my iphone is in recovery mode and when i try to restore it, its doesn't go all the way threw this happen right after i try to upgrade my phone. what do i do HELP ME!!!
Hi, are you doing it through Settings or via iTunes? If doing it through Settings, try plugging it in via USB and updating with iTunes. Hope this helps.
-
I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw. -
I restored my ipod touch but when i connect it with itunes it hkeeps saying that my ipod is on recovery mode and have to restore it again. What should i do?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have a iPhone 4 in recovery mode and it will not restore to factory settings.
I have a iphone 4 in recovery mode and it will not restore to factory settings. I get the error message error 21 and 2001. What can I do? I have tried all the steps.
Alextails998 wrote:
I have tried all the steps.
All what steps?
Did you go through the troubleshooting information here: http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
and
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
If so, then it's a hardware problem. Make an appointment at the genius bar and get it replaced. Based on the "it was water damaged", I think it's a safe bet that it's toast. -
help me
My iPhone is in recovery mode and I do not see it on my laptop and on iTunes. Moreover, I can not turn it off and when I try it comes up all the time in the recovery mode.Hey Yan Heng,
Thanks for the question. It sounds like your iOS device is not recognized in iTunes for Windows, while in recovery mode. The following resource may help to resolve your issue. While you should run through each step, the specific information related to your symptom is outlined in Step 5 (If the device is not recognized while in Recovery Mode).
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
My Iphone is in recovery mode and won't restore, what do I do?
My Iphone is in recovery mode and won't restore, what do I do?
Hi ...
Try here > iOS: Unable to update or restore
Cute user name
Maybe you are looking for
-
How can I have 2 variables for one output?
I need it so that the spacebar does one thing on one frame and another thing on the other. I have solved this but now I need to know how can I have it so 2 variables = 1 output. This is my code at the moment: while (menu) if (changecharacter) gotoAnd
-
Dacf; imageControl; doesn't save
JDEV 3.2/JDK 1.3 I set up a table in the database, with a nice LONG RAW column. I hooked in an entity object, a view object and a rowsetinfo. Cool. Set up a frame with a imagecontrol mapped to the rowsetinfo attribute (LONGVARBINARY). Executed it...
-
FCP7 -1920 x 1080 photo mismatch timeline issue
I have DSLR still photos shot at 1920x1080 (16:9) ratio Photoshop confirms the dimensions-- and also square pixels. (72dpi) If I create a timeline in FCP7 choosing a 1920 x 1080 preset (HDTV)... ---when I place the photo on the timeline-- it
-
A mild question about table alignment
I use a specific style for table anchor points, imaginatively called :anchor and defined as left justified. Sometimes I import tabbed text for a fairly narrow table, and convert it using a table style defined as left justified. How come the results (
-
I have : <?php //--------------TESTING VARIABLES------------ $test_String = $row_Latest['Map_String_Mob']; print($test_String); ?> I then try : <a href=" <?php echo $test_String; ?>" target="_blank">Link</a> This causing an error when it opens the ne